危险废物回转式流化冷渣多段焚烧系统焚烧特性研究

危险废物的处理和处置是摆在我国各级市政府面前的紧迫任务。然而我国已经运行的危险废物焚烧装置普遍存在回转窑挂壁结渣、热灼减率偏高和污染排放超标等问题,作者通过将回转窑和流化床特点相结合的方法提出了一种新型危险废物回转式流化冷渣多段焚烧处置装置。该装置采用回转窑(一燃室)、二燃室和流化床结合的热解-流化焚烧工艺,特别是采用控制窑头温度避免了回转窑挂壁结渣;采用流化冷渣装置延长未燃烬渣的焚烧时间,解决了热灼减率偏高问题;水冷式烟气急冷装置可以将烟气温度从1 100℃降到200℃,防止了二恶英的尾部低温再生成。该系统运行稳定可靠,可以处理医疗垃圾和大多数的固态和液态危险废物,实现了烟气污染物尤其是二恶英排放达到国家标准的目标。同时对该系统运行时窑头温度分布、二燃室炉膛出口氧量变化、回转窑和炉膛升温特性、燃烧室外壁温度分布等几方面运行数据都进行了详细的介绍,为危险废物焚烧炉的运行提供了宝贵的经验数据。     

中国总量控制实践与发展态势

文中所说“总量控制”,全称是污染物排放总量控制制度。当污染物超出环境容量,总量控制一般以削减现有总量的方式出现,也就是通常所说的“减排”。结构减排在减排中占据主导的核心地位。实践表明,“节能必减排,减排促节能”。节能减排相结合是推动经济发展方式转变、调整经济结构、提高自主创新能力、实现环境与发展“双赢”的一种有效途径,也是科学发展的必然要求。节能减排与应对气候变化密不可分,是应对气候变化的主要支撑面。控制温室气体（以CO2为代表）排放强度,是对污染物排放总量控制制度的深化与发展。     

我国工业SO2排放趋势及影响因素分析

分析了我国工业SO2排放量的变化趋势,以及其与GDP、工业产值、火电厂发电量等指标的变化关系;利用50个省市1998—2007年的有关数据建立了SO2排放量的影响因素面板数据模型,力求通过定量分析识别影响我国工业SO2排放量的关键因素。研究表明,我国工业SO2排放量与第二产业比重、火力发电比重并无明显关系,而GDP、发电量、一次能源转化效率、SO2去除率存在显著关系,对SO2工业实际排放量起决定作用的是SO2的去除率。     

Managing Manure from China’s Pigs and Poultry: The Influence of Ecological Rationality

We have investigated manure management practices at three farm scales in Chinese pig and poultry production. The concept of ecological rationality was employed to explore empirically how environmental concerns drive adoption of environmental-friendly manure management technologies at different farm scales. The more developed Rudong County in Jiangsu Province and the less developed Zhongjiang County in Sichuan Province were chosen as cases for study of 258 animal breeders. On the contrary to our hypothesis, medium-scale farmers were not always found to be laggards in adoption of manure management technologies. Government ecological rationality played a key role to induce environmental-friendly technology adoption on its own, but also in cooperation with ecologically rational individual or network drivers. Authorities no longer applied their efforts in a conventional command-and-control way, but more in the form of incentives, stimulation, and information to farmers. Individual farmers in general showed low environmental responsibility in relation to manure handling.     

基于DEA模型的太湖流域企业污水治理效率

运用数据包络分析DEA方法,建立了太湖殷村港流域工业园区企业污水治理效率评价体系,并利用该体系对园区内企业污水治理效率进行了实证研究。利用效率评价函数对园区内20家企业进行评价,结果表明,其中4家企业达到环境治理效率相对高效;20家企业的废水排放量、COD和NH3-N排放削减总量分别为3 691 860、217.53和14.64 t/a,削减潜力较大。实证研究结果表明,该环境绩效评价系统可为园区企业污水治理调控提出定量化的调整建议。     

The emission inventory of atmospheric industrial pollution sources of the five cities in Zhejiang Province

The amount of several air pollutants emitted in some cities including Hangzhou,Ningbo,Huzhou,Shaoxing and Jiaxing of Zhejiang Province is based on pollution source census data of Zhejiang Province in 2010.This paper focused on the release of air pollutants such as NO_(x2),SO_2,CO,PM2.5,PM10 and VOC,and calculated the total amount of those air pollutants.It analyzed air pollutant emission factors and found that the electricity and heat production industry released the largest amount of pollutants.     

水稻土中半胱氨酸分解产生含硫气体的研究

在室内培养条件下,测定了水稻土中含硫气体的释放．结果表明,该土壤中有硫化氢(Ｈ２Ｓ),羰基硫(ＣＯＳ),二甲基硫(ＤＭＳ)三种气体释放．当土壤中加入半胱氨酸后,ＣＯＳ和Ｈ２Ｓ气体的浓度有了明显增加,并有ＣＳ２和ＣＨ３ＳＨ测出,而ＤＭＳ的浓度变化不大．这些结果表明半胱氨酸的分解可能是 ＣＯＳ,Ｈ２Ｓ,ＣＳ２和 ＣＨ３ＳＨ的产生源之一．在好氧(正常大气)条件下,Ｈ２Ｓ,ＣＯＳ,ＣＳ２和ＣＨ３ＳＨ的释放量低于厌氧(氮气氛围)条件下的释放量,ＤＭＳ则高于厌氧条件下．这表明水稻土中半胱氨酸分解产生 Ｈ２Ｓ,ＣＯＳ,ＣＳ２和 ＣＨ３ＳＨ需较强的还原条件,产生这四种气体的微生物需要严格的厌氧条件．产生ＤＭＳ的微生物则比前者需要高一些的含氧量．在光照条件下,各含硫气体的释放量普遍高于无光照条件下的释放量．释放含硫气体的大多数微生物适宜的含水率为５０%且对土壤的ｐＨ值有一定要求．     

太湖零点行动前后水质状况对比分析

根据 1 998年 1 1月和 1 999年 1 0月的监测数据 ,对零点行动前后太湖各监测点位的水质状况及DO、CODMn、TP、TN、Chla等主要指标的空间分布进行了对比 ,发现污染状况并未得到明显改善 ,除了人为因素外 ,非点源污染的贡献和底泥营养物质的释放是影响水质改善的 2个重要因素     

Determination of PCDDs,PCDFs, PCBs and HCB emissions from the metallurgical sector in Poland

Background The aim of the project was to measure the actual emissions of PCDD/F, PCBs and HCB from 20 selected metallurgical installations in Poland, in order to update the national inventory of dioxin emission from metallurgical industry for developing a strategy for dioxins and furans emission abatement from the subject facilities (UNEP 2005). Methods Sampling methodology used in this work was developed at the Cracow University of Technology because of the complexity of simultaneous sampling and determining PCDFs, PCDDs, PCB and HCB. For the determination a GC-MS/MS system was used. Results and Discussion Results from the work indicate that the highest dioxins and PCB concentrations were recorded for iron ore sintering plants at 1.10–1.32 ng total¹ TEQ/Nm³ followed by aluminium scrap melting at 0.03–0.66 ng total TEQ/Nm³. The highest HCB concentrations at 613–1491 ng/Nm³ were also recorded for iron ore sintering plants, whereas at aluminium plants the HCB concentrations were in the range of only 10.1–22.7 ng/Nm³. Conclusions The above investigations indicate that secondary aluminium production is the most significant dioxins source, if calculated as emission factor values. However, iron ore sintering plants are operating at much higher production capacity, causing this process to become the major source of dioxins, PCB and HCB pollution to the atmosphere in Poland. Recommendations and Perspectives Based on the performed tests and the environmental reviews of selected plants several recommendations were formulated for the reduction of generation or of emission of these pollutants from iron ore sintering plants, electric arc furnace steel production processes, hot-blast furnace operations, secondary aluminium smelting and primary zinc production from zinc cathodes.     

利用MOBILE 6.2模型预测LPG出租车排放因子

针对MOBILE6．2预测天然气汽车排放因子的功能,分析了其在预测液化石油气（LPG）轻型汽车上的可行性。并根据LPG出租车汽车排放总量分析系统（VMAS）测试结果,得到所需参数,预测了实验车队的排放因子,与实测值的误差≤10％,表明MOBILE6．2预测LPG轻型汽车排放因子具有良好的适用性。