厚软场地上大跨径桥梁设计反应谱研究

大跨径桥梁塔高、跨径大、自振周期长,深厚、软弱场地的长周期地震动对桥体结构影响较大。我国《公路工程抗震设计规范(JT J004-89)》也只适用主跨不超过150 m的梁桥和拱桥,国内长期以来没有一个适用于大跨径桥梁的抗震设计规范或指南。本文结合大跨径桥梁工程实例,根据场地土层静、动力性能参数的原位测试和动三轴试验结果,进行厚软场地土层地震反应分析,研究厚软场地的地震动效应,讨论了不同地震动强度时厚软场地的设计反应谱特征,分析了现行规范设计反应谱应用的局限性,成果对相关工程有重要指导意义,对大跨径桥梁抗震设计规范的制定也有借鉴作用。     

烟气脱硫系统的吸收塔及停留时间

介绍了烟气脱硫系统中三种主要的吸收塔类型,及烟气在吸收塔中停留时间和喷淋吸收区高度的计算方法。简述了液气比与气速、烟气中SO2含量的关系,并列举了喷淋塔、动力波塔和平流塔等工程实例。     

Trichoderma atroviride as a bioremediator of Cu pollution: An in vitro study

Isolated Trichoderma atroviride from Cu-polluted river sediment at the Serdang Industrial Area was studied under in vitro conditions to understand the mechanisms that allowed the fungi to thrive in the Cu-polluted freshwater ecosystem. From this study, adsorption was recognized as the main mechanism of Cu tolerance with 50–85% adsorption during the in vitro experiment. The uptake capacity of the isolate in liquid medium ranged from 0.8 to 11.2 mg g^?1 in the potato dextrose broth medium with increasing Cu concentrations from 25 to 300 mg L^?1. It was found that 2.7–5.0% of Cu was lost due to washing. The high percentage of Cu adsorption and the high uptake capacity of Cu by T. atroviride suggest that it is a potential bioremediator of Cu. However, further studies are needed to confirm its practical use as a bioremediating agent for Cu under field conditions.     

Determination of mercury and arsenic levels in fish caught in the Beheshtabad River,Chaharmahal and Bakhtiari Province,Iran

Mercury and arsenic pollution has been recognized as a potential environmental and public health problem for over 40 years. The major source of exposure to mercury for humans is the ingestion of fish. This study was conducted with the aim of determining the levels of mercury and arsenic in the muscles of four fish species caught in the Beheshtabad River and comparing the results with the maximum tolerance levels for mercury and arsenic. The samples of 90 fish were used for the determination of both the metals by graphite furnace atomic absorption spectrometry. The results showed that the concentrations ranged from 1.5 to 3.8 µg kg^?1 for mercury and from 35 to 70 µg kg^?1 for arsenic, with means of 2.7 ± 0.5 and 57 ± 12 µg kg^?1, respectively. Both mean levels were lower than the threshold limits acceptable by WHO standards.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Determination of cobalt by air-assisted liquid–liquid microextraction

Abstract

A rapid and selective technique for extraction, preconcentration and determination of trace amounts of cobalt in water and pharmaceutical samples by air-assisted liquid–liquid microextraction combined with flame atomic absorption spectrometry is proposed. 1-Nitroso-2-naphthol is used as a complexing agent and 1-octanol as an extraction solvent. Parameters relevant for analytical effectivity, i.e. pH of sample solution, concentration of complexing agent, volume of extraction solvent, and number of extraction cycles are optimized using a Box–Behnken design. At optimum conditions, a dynamic linear range of 5–600?µg L^?1 is obtained, with a limit of detection of 1.2?µg L^?1. The method is used for determination of Co(II) in environmental water and pharmaceutical samples.     

Speciation of heavy metals in suspended particulates in urban air†

An anayltical procedure based on a sequential extraction scheme is applied to samples of suspended particulates from an urban area of Barcelona. This area presents high levels of air pollution owing to automotive emissions and industrial activity.

The procedure allows the partitioning of particulate trace metals into four fractions: soluble and exchangeable, bound to carbonates and iron‐manganese oxides, bound to organic matter and residual. In this work, the chemical associations of Fe, Pb, Cu, Mn, Cr and Cd have been investigated.

In the analysed samples, only the cadmium is predominantly in the first fraction whereas the other metals are largely associated to carbonates and Fe‐Mn oxides.     

SDA脱硫工艺在烧结烟气脱硫中的应用

介绍了沙钢集团4号360 m2烧结机全烟气脱硫项目的工艺选择、脱硫原理、工艺流程及投产后生产情况,通过对生产后运行分析,认为旋转喷雾干燥法(SDA)作为一种新型的脱硫工艺,适合作为烧结烟气脱硫的主工艺进行推广。     

超大跨度渡槽脉动风频率特性分析

贵州龙场渡槽是我国目前最大的拱跨渡槽,其脉动风频率特性分析对设计工作具有极其重要的指导作用。计算了龙场渡槽在有水、无水工况下的前20阶自振频率,分析了相应的振型;采用极值Ⅰ型概率分布函数,计算得到龙场渡槽所在地的50年一遇最大设计风速为17.6m/s;针对1986～2010年间的3次强风风速和50年一遇最大设计风速,计算了龙场渡槽所在地典型高程处的脉动风功率谱密度。研究表明:在同一高度,随着年平均最大风速的增加,功率谱密度最大值逐渐增大,其对应的频率也在增大;对于同一风速,随着高度的增加,功率谱密度的最大值逐渐增大,其对应的频率也在增大。通过比较龙场渡槽自振频率与脉动风功率谱密度显著值所对应的频率,认为龙场渡槽在上述风速下不会发生共振现象。     

硝基化合物的高效液相色谱(HPLC)分析

硝基化合物是炸药废水的主要成分,大部分硝基化合物具有较高的毒性.本文对奥克托今、黑索今、1,3,5-三硝基苯、1,3-二硝基苯、硝基苯、2,4,6-三硝基甲苯、2-氨基-4,6-二硝基甲苯、2,4-二硝基甲苯共8种硝基化合物的紫外光谱和液相色谱分离条件进行了研究,其最佳检测波长分别为228 nm、227 nm、227 nm、237 nm、272 nm、230 nm、226 nm、244 nm.本文建立了8种硝基化合物的高效液相色谱测定方法,色谱条件为:色谱柱为ZORBAX SB-C18(3.0 mm×250 mm,5μm),检测器为紫外检测器,流动相为甲醇-水(50∶50),流速为0.5 mL.min-1.水中8种硝基化合物可以在13 min内得到较好的分离,检出限均≤0.8 ng,回收率大于95%.