Waste management in a more unequal world: centring inequality in our waste and climate change discourse

ABSTRACT

Climate change is expected to contribute to global inequality, and exacerbate ecological risk for the world's poor. Despite recent trends within waste management academic discourse, which has begun to engage with inequality, and its underlying socio-economic and socio-political causes, discussions of inequality have so far remained absent from our investigations on climate change's impacts on waste management systems and practices. The purpose of the discussion is to call for a centring of inequality within our waste and climate discourse. I identify two main pathways for scholarly investigation, specifically, developing alternative waste management solutions for contexts in which waste management systems fail, which do not just perpetuate existing inequalities, and addressing the growing inequality in waste management technology and practice between the Global North and the Global South.     

Utilization of red mud as catalyst in conversion of waste oil and waste plastics to fuel

The aim of this study was to investigate the possibilities of using a by-product (red mud) from alumina production as a catalyst for recovery of waste. The conversion of waste mineral oil (WMO) and waste mineral oil/municipal waste plastic (WMO/MWP) blends over red mud (RM), a commercial hydrocracking catalyst (silica–alumina), and a commercial hydrotreating catalyst (Ni–Mo/alumina) to fuel has been studied. The effect of the catalyst and the temperature on the product distribution (gas, liquid, and wax) and the properties of liquid products were investigated. In the case of hydrotreatment of WMO, the liquids obtained over RM at both 400° and 425°C had larger amounts of low-boiling hydrocarbons than that of thermal or catalytic treatment with hydrotreating catalyst. Gas chromatography and nuclear magnetic resonance analysis of the liquid products showed that RM had hydrogenation and cracking activity in hydrotreatment of WMO. In coprocessing of WMO with municipal waste plastics, temperature had an important effect as well as the amount of MWP in the blend and the catalyst type. The hydrocracking at 400°C produced no liquid product. In hydrocracking at 425°C, the product distribution varied with catalyst type and MWP amount. The commercial hydrocracking catalyst had more cracking ability in the conversion of WMO/MWP to liquid and gas fuel than RM. In the case of hydrocracking over RM, the largest amount of liquid having satisfactory quality was obtained only from the blend containing 20% MWP.     

Influences of Magnesium <Emphasis Type="Italic">tri-</Emphasis>Silicate on the Physical,Mechanical, and Degradable Properties of Ultraviolet (UV) Radiation Cured Plain Board Surface

A series of formulations were prepared with different percentages of oligomer, epoxy diacrylate (EA-1020 ), monomer, 1,6 Hexane diol diacrylate,(HDDA) and different percentages of filler (Magnesium tri-silicate, Mg₂Si₃O₈). Irgacure 369 [2-Benzyl-2-dimethyl-amine-1 (4-morpholinophenyl) butanone-1] was used in the formulations as photoinitiator. Ultraviolet (UV) cured thin polymer films were prepared from these formulating solutions on clean glass plates. Pendulum hardness (PH), gel content and macro scratch hardness (MSH) of the UV cured films were studied. One percent Mg₂Si₃O₈ containing formulation showed the premium properties. The substrates (plain board) were coated by these formulating solutions and cured under the same UV lamp at different intensities of radiation. Various properties of the coated surface such as PH, gloss, adhesion, abrasion and MSH were investigated. The base coat containing 1% Mg₂Si₃O₈ and top coat containing 48% HDDA produced the best performance among all the formulations inspected. The degradable properties in different weathering conditions on PH, gloss, adhesion, abrasion and MSH were measured. The surface cured with the optimized formulation (E) again yielded the minimum loss of the properties.     

Pore structure and adsorption properties of activated carbon prepared from granular molded waste paper

We have previously manufactured activated carbon using waste paper board, which was prepared by adding 8% phenol resin adhesive to torn waste newspaper and hot-pressing. In this study, the pretreatment process of the raw material was simplified; the waste paper was extruded to form granules. The activated carbon was manufactured by the carbon dioxide activation method using the granules as the raw material. The properties of the activated carbon were evaluated based on the pore structure, the iodine adsorption number, and the adsorption of toluene vapor in a sealed chamber. The activated carbon, which was manufactured at an activation temperature of 1100°C and a treatment time of 60min, exhibited a specific surface area of 1241m²/g and an iodine adsorption number of 1120mg/g. These results were similar to those obtained for two commercially available activated carbons. The extent of toluene vapor adsorption by this activated carbon was similar to that observed for the two commercial activated carbons over a period of 130min.     

Health risk assessment of PCDD/F emissions from a hazardous and medical waste incinerator in Turkey

A multimedia risk assessment procedure was conducted to determine the fate and transport of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) emissions from the Izmit Hazardous and Medical Waste Incinerator (IZAYDAS) in Turkey and their potential health risks. Congener concentrations in ambient air and their deposition rates were determined by an air dispersion model (ISCST3). Their transfer to some plant groups and animal tissues was predicted by food chain modeling. Exposure scenarios were produced based on three receptor groups (urban, semiurban, and rural) and five subgroups determined according to ages. Daily intakes of PCDD/Fs via exposure pathways were determined based on three different emission scenarios for each group and subgroup. Estimated incremental PCDD/F doses caused by the incinerator emissions in central-tendency scenario were computed as between 2.31 x 10(-6) and 0.008 pg TEQ kg(-1) bodyweight (bw) day(-1) on average for all the receptors other than infants in all the settings, while the range was 3.01 x 10(-5)-0.081 pg TEQ kg(-1) bw day(-1) for infants. Sensitivity analysis showed that the consumption of vegetal products and their locally grown fractions are the most significant parameters in the exposure to PCDD/Fs in the area.     

Thermal cracking of oils from waste plastics

Thermal cracking of decomposed waste plastic oil produces a good yield of olefins. The solvent extraction of such waste plastic oil seems to be efficient for increasing gas yields and recycling monomers. To assess the potential of monomer recovery from municipal waste plastics, the oils were cracked using a laboratory-scale quartz-tube reactor. The waste plastic oils were provided by two commercial plants of the Sapporo Plastic Recycle Co. and the Dohoh Recycle Center Co. in Japan. A model waste plastic oil made in a laboratory was also examined. Yields of ethene, propene, and other products were measured at different temperatures. Two-step pyrolysis reduces coking compared with the direct thermal degradation of plastics. The raffinates from waste plastic oils extracted by sulfolane were also cracked. The primary products were almost the same as those from nontreated oils. The maximum total gas yield was 78wt%–85wt% at 750°C, an increase of about 20wt% compared with that of nonextracted oil. Solvent extraction removes stable aromatic hydrocarbons such as styrene, which is more coked than cracked.     

青藏铁路列车运行控制系统的安全性分析

分析了青藏铁路中多种不利因素对轨道电路参数的影响 ;提出了在青藏铁路不宜采用现行基于轨道电路的列车运行控制系统 ,而应选择基于通信的列车运行控制系统的理由 ;给出了系统的基本结构及提高系统可靠性的措施 ;与此同时 ,就人们关心的无线传输列车控制数据的可靠性和安全性难题 ,通过建立马尔可夫模型的方法进行了分析     

A Paradigm of International Environmental Law: The Case for Controlling the Transboundary Movements of Hazardous Wastes

The production of large quantities of wastes globally has created a commercial activity involving the transfrontier shipments of hazardous wastes, intended to be managed at economically attractive waste-handling facilities located elsewhere. In fact, huge quantities of hazardous wastes apparently travel the world in search of “acceptable” waste management facilities. For instance, within the industrialized countries alone, millions of tonnes of potentially hazardous waste cross national frontiers each year on their way for recycling or to treatment, storage, and disposal facilities (TSDFs) because there is no local disposal capacity for these wastes, or because legal disposal or reuse in a foreign country may be more environmentally sound, or managing the wastes in the foreign country may be less expensive than at home. The cross-boundary traffic in hazardous wastes has lately been under close public scrutiny, however, resulting in the accession of several international agreements and laws to regulate such activities. This paper discusses and analyzes the most significant control measures and major agreements in this new commercial activity involving hazardous wastes. In particular, the discussion recognizes the difficulties with trying to implement the relevant international agreements among countries of vastly different socioeconomic backgrounds. Nonetheless, it is also noted that global environmental agreements will generally be a necessary component of ensuring adequate environmental protection for the world community—and thus a need for the careful implementation of such agreements and regulations.     

不同塔型交流输电线路的电磁环境分析

选择500 kV同杆双回紧凑型线路、500 kV同杆双回常规线路、500 kV单回紧凑型线路、500 kV单回常规线路、220 kV同杆双回线路和220 kV/110 kV同杆4回线路进行不同塔型交流线路的电磁环境测量.通过测试和计算分析,给出了被测试线路的电磁环境水平.     

Manufacture of strand board made from construction scrap wood

The objective of this research was to evaluate the physical and mechanical properties of strand board made from construction scrap wood. The strand board was manufactured using Sugi (Cryptomeria japonica D. Don) and Douglas-fir (Pseudotsuga japonica) strands selected from construction scrap wood. The strands were oriented, and three-layer (face/core/face) strand board of three types was produced: one in which the strands of the face layer were oriented at a right angle to those of the core layer (R board), another in which the strands of the face layer were oriented parallel to those of the core layer (P board), and a third in which the strands of both layers were oriented at random (Ra board). The physical and mechanical properties of the boards were evaluated based on Japanese Industrial Standard (JIS). The main results obtained are as follows: the bending strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard of JIS A 5908. The bending strength of the strand board was affected by board density, strand orientation and resin content, and became larger with increased density as well as resin content. That of the parallel specimen of P board was the largest among the specimen-orientations and types. The internal bond strength of the strand board with a density larger than 0.55 g/cm³ exceeded the standard value of type 18 particleboard and type 24-10 particleboard of JIS A 5908. The internal bond strength was markedly affected by the resin content of the core layer, and became larger with increased density. The thickness swelling of the strand board decreased with increased resin content, and become larger with increased density.