Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.     

云桌面终端电源端传导骚扰和辐射骚扰整改案例

某云桌面终端在进行中国强制性认证(CCC)时,电磁兼容试验项目电源端传导骚扰、辐射骚扰测试均出现超标现象。将重点从PCB板级电路EMC设计方面剖析其测试不合格原因,并给出相应的整改措施,最后对此案例进行总结,给出类似电子产品在PCB设计时的注意事项,以期能给PCB设计工程师提供一些参考意见。     

军用集成电路质量控制方法分析与探讨

集成电路是军用电子设备最重要的器件之一,集成电路的质量直接影响到军用装备的质量。从集成电路的选择、二次筛选和破坏性物理分析(DPA)这几个方面探讨了军用集成电路的质量控制方法。实践证明通过质量控制筛选得到的集成电路整批使用可靠性都有明显的提高。     

微波辐照热解废印刷电路板产物的分析研究

为了减少电子废弃物对环境的危害,实现其资源化回收利用,研究了微波辐照热解废印刷电路板的效果,并采用红外光谱、气相色谱质谱和X荧光光谱等方法对热解产物的组成及性质进行了分析.结果显示:微波热解得到的气体、液体、固体的产率分别为7%～33%、26%～45%、31%～51%,其中气体主要由CO、CO2、H2及有机烃类组成,可燃性气体占70%(体积分数)左右,可作为燃料气加以利用;液体分为水相及油相,经常压蒸馏后得到的120～250 ℃馏分主要为单酚化合物,苯酚高达50%(质量分数)左右,甲基苯酚和邻甲基苯酚为25%(质量分数)以上,是良好的化工原料;固体中除炭外,还含有许多金属如铅、锡和铜等,可以回收利用.说明微波热解技术处理电子废弃物可实现资源化回收利用.     

低强度超声波强化剩余活性污泥好氧消化的研究

污泥是城市污水处理厂的副产物,若处理不当,将会带来一系列严重的环境问题.实验采用低强度超声波对剩余活性污泥(WAS)的好氧消化过程进行强化,选取超声强度、超声时间、超声间隔3个因素设计正交实验.结果表明,经超声辐照的WAS,其好氧消化时间最短仅约为13 d,比未经超声辐照的缩短了18.00 d.对实验结果的极差分析和方差分析表明,低强度超声波强化WAS好氧消化的最佳参数为:超声强度1.0 W/cm2、超声时间10 min、超声间隔8 h.实验还研究了WAS达标前后溶解性化学需氧量(SCOD)和总化学需氧量(TCOD)的变化情况,发现在相对较短的处理时间内,经低强度超声波强化处理的WAS的TCOD降解率仍然能与对照相近甚至高于对照,主要原因是低强度超声波强化了微生物的新陈代谢,促进了其对有机物的吸收分解.     

气相色谱法测定空气和废气中8种烃类化合物

建立了针筒采样、大口径毛细管柱分离、气相色谱-氢火焰离子化检测器测定空气和废气中甲烷、乙烷、乙烯、乙炔、丙烷、异丁烷、正丁烷和正戊烷等8种烃类化合物的方法.优化了试验条件,方法线性良好,甲烷、乙烯、乙炔、乙烷、丙烷、异丁烷、正丁烷和正戊烷的检出限分别为0.09 mg/m3、0.20 mg/m3、0.18 mg/m3、0.29 mg/m3、0.28 mg/m3、0.37 mg/m3、0.16 mg/m3和0.56 mg/m3,RSD＜8.0%,加标回收率为80.5%～104%.     

环境监测实验室废液的管理与处理方法

环境监测实验室的废液处理常常被忽视,提出建立有效的废液管理制度的必要性.有针对性地介绍了环境监测实验室中常见废液的处理方法.     

厌氧-好氧生物反应器填埋工艺特性研究

基于生物反应器填埋技术,研究1种填埋场地循环操作的厌氧-好氧生物反应器填埋工艺,设计了该工艺模拟装置并研究了其运行工艺特性.厌氧阶段主要通过渗滤液回灌控制反应器工艺条件,主要试验结果为,pH值,R1在 6周后可上升至6.7～7.8,R2在17周内一直低于6.8;渗滤液COD浓度,R1在13周时下降至10?617 mg/L,R2在5周后上升至60?000 mg/L后长期趋于稳定;填埋气累计产量,R1在8周达到44%,R2几乎不产气.衡量稳定化可以分别采用渗滤液pH、COD浓度及BOD₅/COD的减少率、填埋气的累计产率等指标来判断,并据此转换为好氧填埋运行.好氧阶段主要是通过强制通风来减少恶臭和水分,主要试验结果为,通风19d氨气浓度降为1.16 mg/m³,通风23d后恶臭浓度降为19;通风14d后含水率降为26%.完成此阶段的工艺指标值可依据矿化垃圾开采的最终用途确定.对主要试验数据进行了数值模拟.厌氧-好氧填埋过程的微生物演替经RISA分析,有4个优势菌群,一些兼性菌群在厌氧-好氧阶段起着重要的承前启后作用.     

关于电子废物资源循环利用的思考

论述了我国电子废物的产生及污染现状,分析了日本、欧美等发达国家促进电子废物循环利用的对策,提出了我国电子废物循环利用的建议。