焦化废水的危害度评价

炼焦废水以产生量大,毒性强而广泛引起中外读者的关注.本文通过具体实例对焦化废水的监测分析,明确了废水中可检出的有机污染物可达139种,其中有氰化物、挥发酚、苯并(a)芘等6项超标.为焦化厂环境影响评价及水污染提供依据.     

生物反应器填埋场渗滤液及其处理对策

根据垃圾的降解和稳定机理分析了生物反应器填埋场渗滤液的动态变化规律，并对其处理对策进行了探讨。生物反应器填埋场前期产生的渗滤液可全部回灌，后期再根据实际情况排放处理部分过量的渗滤液。在对渗滤液水量和水质全面直观认识后，再对生物反应器填埋场渗滤液处理工艺进行针对性的选择和设计，并宜采用物化法处理方式。     

总量控制下环境容量产权交易及政府行为分析

利用经济学的原理，本文分析了环境容量的经济特点(不是环境容量产权交易的特征)，提出了环境容量产权交易的可行性和必要性。同时针对政府在环境容量产权交易中的作用进行了必要的分析。     

玻璃生产企业废水综合利用的可行性探讨

本文分析了玻璃生产企业废水的来源,并从耀华玻璃集团实施的废水治理项目的实际出发,阐述了废水经过治理后综合利用的途径,实现废水的零排放,减少环境污染,节约水资源。     

城市垃圾甲烷气体排放及减排对策

本文讲述了城市垃圾的现状以及影响垃圾甲烷排放的各种因素，并根据ＩＰＣＣＧｕｉｄｅｌｉｎｅｓ（１９９５）提供的方法对１９９０～２０１０年江浙沪地区城市垃圾甲烷排放量的变化趋势进行了预测统计计算，１９９０年江浙沪地区城市垃圾甲烷排放量为７１２３万吨，２０１０年预测的甲烷排放量为２６６７６万吨，本文就垃圾中甲烷的排放提出了切实可行的减排方案。     

The economics of tire remanufacturing

The world market for tires is described to identify the current material flow from raw materials to tires and the used tire disposal problem. Then, I describe the value-adding operations in the tire production process and in the tire retreading process. Once retreading is identified as the only recovery alternative that maximizes tire utilization, I explain why heat generation is the only recovery alternative, when retreading is not technically feasible. The economic values of heat generation in electric plants and in cement kilns are discussed. The paper culminates with the case of retreading, the tire remanufacturing process and the recommendation of a simple decision rule for selecting the number of times a tire should be retreaded to maximize its utilization.     

Production of hydrogen by steam gasification of dehydrochlorinated poly(vinyl chloride) or activated carbon in the presence of various alkali compounds

Steam gasification of dehydrochlorinated poly(vinyl chloride) (PVC) or activated carbon was carried out in the presence of various alkali compounds at 3.0 MPa and 560°C–660°C in a batch reactor or in a semi-batch reactor with a flow of nitrogen and steam. Hydrogen and sodium carbonate were the main products, and methane and carbon dioxide were the minor products. Yields of hydrogen were high in the presence of sodium hydroxide and potassium hydroxide. The acceleration effect of the alkali compounds on the gasification reaction was as follows: KOH > NaOH > Ca(OH)₂ > Na₂CO₃. The rate of gasification increased with increasing partial steam pressure and NaOH/C molar ratio. However, the rate became saturated at a molar ratio of NaOH/C greater than 2.0.     

如何应对发达国家的环境保护壁垒

20世纪90年代以来,环境保护已成为世界各国政府关注的首要问题之一.出于保护本国消费者生命健康和生态环境的考虑,发达国家纷纷把环境保护壁垒作为其贸易壁垒的主要组成部分.我国作为世界上最大的发展中国家,近年来在对美国等发达国家的贸易中保持了较大的顺差,且出口产品多为劳动密集型产品,因此受到发达国家环境保护壁垒的限制也较严重.从政府和企业两方面入手,讨论我国应如何应对发达国家的环境保护壁垒.     

Pyrolysis and catalytic pyrolysis as a recycling method of waste CDs originating from polycarbonate and HIPS

Pyrolysis appears to be a promising recycling process since it could convert the disposed polymers to hydrocarbon based fuels or various useful chemicals. In the current study, two model polymers found in WEEEs, namely polycarbonate (PC) and high impact polystyrene (HIPS) and their counterparts found in waste commercial Compact Discs (CDs) were pyrolysed in a bench scale reactor. Both, thermal pyrolysis and pyrolysis in the presence of two catalytic materials (basic MgO and acidic ZSM-5 zeolite) was performed for all four types of polymers. Results have shown significant recovery of the monomers and valuable chemicals (phenols in the case of PC and aromatic hydrocarbons in the case of HIPS), while catalysts seem to decrease the selectivity towards the monomers and enhance the selectivity towards other desirable compounds.     

Characterisation of polycyclic aromatic hydrocarbons in flue gas and residues of a full scale fluidized bed combustor combusting non-hazardous industrial waste

This paper studies the fate of PAHs in full scale incinerators by analysing the concentration of the 16 EPA-PAHs in both the input waste and all the outputs of a full scale Fluidized Bed Combustor (FBC). Of the analysed waste inputs i.e. Waste Water Treatment (WWT) sludge, Refuse Derived Fuel (RDF) and Automotive Shredder Residue (ASR), RDF and ASR were the main PAH sources, with phenanthrene, fluoranthene and pyrene being the most important PAHs. In the flue gas sampled at the stack, naphthalene was the only predominant PAH, indicating that the PAHs in FBC’s combustion gas were newly formed and did not remain from the input waste. Of the other outputs, the boiler and fly ash contained no detectable levels of PAHs, whereas the flue gas cleaning residue contained only low concentrations of naphthalene, probably adsorbed from the flue gas. The PAH fingerprint of the bottom ash corresponded rather well to the PAH fingerprint of the RDF and ASR, indicating that the PAHs in this output, in contrast to the other outputs, were mainly remainders from the PAHs in the waste inputs. A PAH mass balance showed that the total PAH input/output ratio of the FBC ranged from about 100 to about 2600 depending on the waste input composition and the obtained combustion conditions. In all cases, the FBC was clearly a net PAH sink.