Experimental investigations on regeneration energy and energy management strategy in series hydraulic/electric synergy system

This research work draws an insight into the experimental investigations on a series hydraulic/electric synergy system—a green transportation system. An experimental test rig of the system with all necessary sensors and instrumentation has been developed to study the energy saving through hydraulic regenerative braking. The effect of various system parameters, such as braking time, maximum accumulator pressure, pre-charge pressure of hydro-pneumatic accumulator, volumetric displacement of the hydraulic master pump, and hydraulic regeneration pump on the quantum of regeneration energy, was analyzed. In addition, an AMESim model of the real-time experimental test rig has been developed and validated with experimental results. A set of five different experimental designs (parameter variations) of the system is defined with the available standard component sizes. The best design is selected of the available experimental designs based on the maximum hydraulic regeneration energy and regeneration efficiency. It was observed that the selected design has an energy efficiency of 13.3% and a regeneration efficiency of 43.8%. An accumulator-centric control strategy for energy management is developed and implemented on the experimental test rig configured with the selected design. The effectiveness of the control strategy is tested through experiments and simulation on the developed test rig.     

Detection of DDT and its metabolites in two estuaries of South China using a SPME-based device: First report of p,p′-DDMU in water column

A solid-phase microextration-based sampling method was employed to determine the concentrations of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT) and its metabolites, 1,1-dichloro-2,2-bis(p-chlorophenyl)ethane (DDD), 1,1-dichloro-2,2-bis(p-chlorophenyl)ethene (DDE) and 1-chloro-2,2-bis(p-chlorophenyl)ethene (DDMU), in two estuarine bays, Daya Bay and Hailing Bay, of South China. Six DDT components including p,p′-DDT, o,p′-DDD, p,p′-DDD, o,p′-DDE, p,p′-DDE, and p,p′-DDMU were detected in Hailing Bay, while only p,p′-DDD was found in Daya Bay. p,p′-DDD was the most abundant DDT component in both bays, sharply different from the previous finding in the water column of the Palos Verdes Shelf, California, USA that p,p′-DDE was prevalent. In addition, the occurrence of p,p′-DDMU (with a range of 0.047-0.21 ng/L in Hailing Bay) has not been reported around the globe, and its presence in our study region appeared to stem from dehydrochlorination of p,p′-DDD, favored under aerobic conditions, but further investigations are clearly needed to confirm the mechanism for generation of DDMU in estuarine environments.     

Management-oriented sensitivity analysis for pesticide transport in watershed-scale water quality modeling using SWAT

The Soil and Water Assessment Tool (SWAT) was calibrated for hydrology conditions in an agricultural watershed of Orestimba Creek, California, and applied to simulate fate and transport of two organophosphate pesticides chlorpyrifos and diazinon. The model showed capability in evaluating pesticide fate and transport processes in agricultural fields and instream network. Management-oriented sensitivity analysis was conducted by applied stochastic SWAT simulations for pesticide distribution. Results of sensitivity analysis identified the governing processes in pesticide outputs as surface runoff, soil erosion, and sedimentation in the study area. By incorporating sensitive parameters in pesticide transport simulation, effects of structural best management practices (BMPs) in improving surface water quality were demonstrated by SWAT modeling. This study also recommends conservation practices designed to reduce field yield and in-stream transport capacity of sediment, such as filter strip, grassed waterway, crop residue management, and tailwater pond to be implemented in the Orestimba Creek watershed.     

Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.     

Long-term pollution by chlordecone of tropical volcanic soils in the French West Indies: A simple leaching model accounts for current residue

Chlordecone was applied between 1972 and 1993 in banana fields of the French West Indies. This resulted in long-term pollution of soils and contamination of waters, aquatic biota, and crops. To assess pollution level and duration according to soil type, WISORCH, a leaching model based on first-order desorption kinetics, was developed and run. Its input parameters are soil organic carbon content (SOC) and SOC/water partitioning coefficient (K_oc). It accounts for current chlordecone soil contents and drainage water concentrations. The model was valid for andosol, which indicates that neither physico-chemical nor microbial degradation occurred. Dilution by previous deep tillages makes soil scrapping unrealistic. Lixiviation appeared the main way to reduce pollution. Besides the SOC and rainfall increases, K_oc increased from nitisol to ferralsol and then andosol while lixiviation efficiency decreased. Consequently, pollution is bound to last for several decades for nitisol, centuries for ferralsol, and half a millennium for andosol.     

几种试剂对硝酸根光催化脱色甲基橙的影响

以NO^-₃为光催化剂,在紫外灯照射下,对甲基橙溶液进行光催化脱色。结果表明,叔丁醇、甲醇和乙醇对催化脱色反应有抑制作用; KBr和Na₂SO₄对脱色反应均有促进作用;而且KBr的加入量存在最佳值; Na₂SO₄的促进作用随Na₂SO₄的量的增加逐渐增强。Na₂CO₃的存在对甲基橙的脱色反应没有影响。K₂S₃O₈和NO^-₃之间存在较强的协同作用;KIO₃和NO^-₃之间存在相加作用;KBrO₃和NO^-₃之间存在拮抗作用。     

Virtues of simple hydro-economic optimization: Baja California, Mexico

This paper uses simple hydro-economic optimization to investigate a wide range of regional water system management options for northern Baja California, Mexico. Hydro-economic optimization models, even with parsimonious model formulations, enable investigation of promising water management portfolios for supplying water to agricultural, environmental and urban users. CALVIN, a generalized hydro-economic model, is used in a case study of Baja California. This drought-prone region faces significant challenges to supply water to agriculture and its fast growing border cities. Water management portfolios include water markets, wastewater reuse, seawater desalination and infrastructure expansions. Water markets provide the flexibility to meet future urban demands; however conveyance capacity limits their use. Wastewater reuse and conveyance expansions are economically promising. At current costs desalination is currently uneconomical for Baja California compared to other alternatives. Even simple hydro-economic models suggest ways to increase efficiency of water management in water scarce areas, and provide an economic basis for evaluating long-term water management solutions.     

Assessing water use and quality through youth participatory research in a rural Andean watershed

Water availability, use and quality in a rural watershed of the Colombian Andes were investigated through participatory research involving local youth. Research included the quantification of disaggregated water use at the household level; comparison of water use with availability; monitoring water quality of streams, community water intakes and household faucets; and the determination of land use – water quality interactions. Youth were involved in all aspects of the research from design to implementation, dissemination of results and remediation options. Quantification of domestic and on-farm water use, and water availability indicated that water availability was sufficient during the study period, but that only an 8% decrease in dry season supply would result in shortages. Elevated conductivity levels in the headwaters were related to “natural” bank erosion, while downstream high conductivity and coliform levels were associated with discharges from livestock stalls and poorly maintained septic tanks in the stream buffer zone. Through the involvement of youth as co-investigators, the knowledge generated by the research was appropriated at the local level. Community workshops led by local youth promoted water conservation and water quality protection practices based on research, and resulted in broader community participation in water management. The approach involving youth in research stimulated improved management of both land and water resources, and could be applied in small rural watersheds in developed or developing countries.     

Predictive models of turbidity and water depth in the Doñana marshes using Landsat TM and ETM+ images

We have used Landsat-5 TM and Landsat-7 ETM+ images together with simultaneous ground-truth data at sample points in the Doñana marshes to predict water turbidity and depth from band reflectance using Generalized Additive Models. We have point samples for 12 different dates simultaneous with 7 Landsat-5 and 5 Landsat-7 overpasses. The best model for water turbidity in the marsh explained 38% of variance in ground-truth data and included as predictors band 3 (630–690 nm), band 5 (1550–1750 nm) and the ratio between bands 1 (450–520 nm) and 4 (760–900 nm). Water turbidity is easier to predict for water bodies like the Guadalquivir River and artificial ponds that are deep and not affected by bottom soil reflectance and aquatic vegetation. For the latter, a simple model using band 3 reflectance explains 78.6% of the variance. Water depth is easier to predict than turbidity. The best model for water depth in the marsh explains 78% of the variance and includes as predictors band 1, band 5, the ratio between band 2 (520–600 nm) and band 4, and bottom soil reflectance in band 4 in September, when the marsh is dry. The water turbidity and water depth models have been developed in order to reconstruct historical changes in Doñana wetlands during the last 30 years using the Landsat satellite images time series.     

Susceptibility indexing method for irrigation water management planning: applications to K. Menderes river basin, Turkey

A susceptibility indexing method was developed based on vulnerability and quality indices. The contamination susceptibility index (SI) at a given location was calculated by taking the product of the vulnerability index (VI) and the quality index (QI): SI = VI × QI. This method incorporates both hydrogeological and hydrochemical data for a comprehensive index mapping. The DRASTIC index methodology was used for the hydrogeological data evaluations. The quality index calculation procedure based on a water quality classification scheme was introduced to evaluate hydrochemical data. The suggested susceptibility indexing method was applied to the Küçük Menderes river basin located in western Turkey. The susceptibility index map shows both hydrogeological and hydrochemical data related to the contamination problem including areas that should be taken into consideration during water management planning. The index map indicates that the most susceptible groundwater is located along the river channel between Kiraz and Tire towns, in the Selçuk area and along the Fertek stream channel to the north of Torbal? town. The results indicate that the incorporation of both hydrogeological and hydrochemical datasets enables more realistic evaluations than those of an individual dataset to estimate the groundwater contamination susceptibility of an aquifer. The numerical procedure applied could be extended further by including other parameters such as retardation, potential contaminant sources, etc. that affect the water quality in a given basin.