Concentration of heavy metals in Karanja reservoir, Bidar district, Karnataka, India

In this study, some heavy metals concentrations (Zn, Pb, Fe, Mn, Cu, Ni) and other physico-chemical parameters were studied during October 2001 to September 2003 in Karanja reservoir, Bidar district. Water quality parameters were collected monthly basis whereas heavy metals were analyzed by Atomic Adsorption Spectrometer (AAS). Heavy metals have shown within the permissible limits, except Fe and Ni were recorded higher values in southwest monsoon, where as Mn has showed higher concentration in northeast monsoon in and summer. All other physico-chemical parameters are with in the permissible limit. Water is moderately hard and reservoir is productive.     

An evaluation of selenium concentrations in water, sediment, invertebrates, and fish from the Solomon River Basin

The Solomon River Basin is located in north-central Kansas in an area underlain by marine geologic shales. Selenium is an indigenous constituent of these shales and is readily leached into the surrounding groundwater. Portions of the Basin are irrigated primarily through the pumping of selenium-contaminated groundwater from wells onto fields in agricultural production. Water, sediment, macroinvertebrates, and fish were collected from various sites in the Basin in 1998 and analyzed for selenium. Selenium concentrations were analyzed spatially and temporally and compared to reported selenium toxic effect thresholds for specific ecosystem components: water, sediments, food-chain organisms, and wholebody fish. A selenium aquatic hazard assessment for the Basin was determined based on protocol established by Lemly. Throughout the Basin, water, macroinvertebrate, and whole fish samples exceeded levels suspected of causing reproductive impairment in fish. Population structures of several fish species implied that successful reproduction was occurring; however, the influence of immigration of fish from low-selenium habitats could not be discounted. Site-specific fish reproduction studies are needed to determine the true impact of selenium on fishery resources in the Basin. The U.S. Government’s right to retain a non-exclusive, royalty free license in and to any copyright is acknowledged.     

浊点萃取分离富集荧光光度法测定水中α - 萘酚

基于非离子表面活性剂Triton X-114,采用浊点萃取分离富集荧光光度法测定水中α-萘酚,优化了影响浊点萃取的各种因素,包括样品酸度、表面活性剂体积分数、氢氧化钠溶液浓度、平衡温度和时间等,讨论了常见无机离子和可能共存的有机物的干扰。方法在0.010 mg/L～0.400 mg/L范围内线性良好,检出限为3.0μg/L,标准溶液测定的RSD为4.8%,水样加标回收率为94.3%～103%。     

水质生物毒性在线监测技术研究进展

从生物分子、细胞、个体、种群和群落水平,系统介绍了国内外研发的水质毒性在线监测技术,归纳分析了各种技术的特点及应用,并提出了其发展前景与趋势。     

A Global Model Tracking Water, Nitrogen, and Land Inputs and Virtual Transfers from Industrialized Meat Production and Trade

Rising populations and incomes throughout the world have boosted meat demand by over 75% in the last 20years, intensifying pressures on production systems and the natural resources to which they are linked. As a growing proportion of global meat production is traded, the environmental impacts of production become increasingly separated from where the meat is consumed. In this paper, we quantify the use of three important resources associated with industrial livestock production and trade—water, land, and nitrogen—using a country-specific model that combines trade, agronomic, biogeochemical, and hydrological data. Our model focuses on pigs and chickens, as these animals are raised predominantly in intensive systems using concentrated, compound feeds. The results describe the geographical patterns of environmental resource use due to meat production, trade, and consumption. We show that US feed, animal, and meat destined for export require almost as much nitrogen and land, and 20% more water, than products destined for domestic consumption. Model results also demonstrate that among various production factors, improvements in crop yields and animal feed conversion efficiencies result in the most significant reductions in environmental harm. By explicitly tracking the externalities of meat production, we hope to bolster suppliers’ accountability and provide better information to meat consumers.

Participatory environmental governance in China: public hearings on urban water tariff setting

In the late 1990s China started to expand its market economic reform to the public sector, such as water services. This reform led to major changes in urban water management, including water tariff management. The reforms in water tariff management relate not only to tariffs, but also to the decision-making on tariffs. Water tariff decision-making seems to move away from China's conventional mode of highly centralized and bureaucratic policy- and decision-making. The legalization, institutionalization and performance of public hearings in water tariff management forms a crucial innovation in this respect. This article analyzes the emergence, development and current functioning of public hearings in water tariff setting, and assesses to what extent public hearings are part of a turning point in China's tradition of centralized bureaucratic decision-making, towards more transparent, decentralized and participative governance.     

A process integration approach to industrial water conservation: a case study for a Chinese steel plant

A systematic approach to optimizing water network has traditionally been utilized to exam and plan water conservation in industrial processes. In the present case study, water-pinch technology was used to analyze and optimize the water network of a steel plant near China's Zhangjiakou city. A system design was developed and a limiting constraint (Cl(-) concentration) was identified based on investigations of water quality then the minimum freshwater and wastewater targets were determined without considering water losses. The analysis was then extended by calculating the additional input of freshwater required to balance the actual water losses. A nearest-neighbor algorithm (NNA) was used to distribute the freshwater and recycled water among each of the plant's operations. The results showed that with some reconstruction of the water network, the flow rates of freshwater and wastewater could be decreased by 57.5% and 81.9%, respectively.     

Modular Design of Field Lysimeters for Specific Application Needs

In Europe, the use of direct methods using lysimeters for measuring water and solute flow in soils increased in recent years. Large weighable lysimeters are best suitable for obtaining reliable data about seepage water quantity and quality. Field lysimeters – lysimeters built in directly in agriculturally used areas – of high technical standard allow a precise determination of the influence of different cropping systems on groundwater quality. They combine the advantages of true field conditions and laboratory possibilities of varying parameters, handling and maintenance. Due to the specific needs of each application the instrumentation varies. Based on general remarks on the advantages of precise weighing lysimeters four standardized lysimeter configurations are presented. Beside the specific needs of design and setup of lysimeter stations, there is need to define general requirements to enable comparable results based on standardized basic design and to reduce individual mistakes.     

Development of a risk-based index for source water protection planning, which supports the reduction of pathogens from agricultural activity entering water resources

Source water protection planning (SWPP) is an approach to prevent contamination of ground and surface water in watersheds where these resources may be abstracted for drinking or used for recreation. For SWPP the hazards within a watershed that could contribute to water contamination are identified together with the pathways that link them to the water resource. In rural areas, farms are significant potential sources of pathogens. A risk-based index can be used to support the assessment of the potential for contamination following guidelines on safety and operational efficacy of processes and practices developed as beneficial approaches to agricultural land management. Evaluation of the health risk for a target population requires knowledge of the strength of the hazard with respect to the pathogen load (massxconcentration). Manure handling and on-site wastewater treatment systems form the most important hazards, and both can comprise confined and unconfined source elements. There is also a need to understand the modification of pathogen numbers (attenuation) together with characteristics of the established pathways (surface or subsurface), which allow the movement of the contaminant species from a source to a receptor (water source). Many practices for manure management have not been fully evaluated for their impact on pathogen survival and transport in the environment. A key component is the identification of potential pathways of contaminant transport. This requires the development of a suitable digital elevation model of the watershed for surface movement and information on local groundwater aquifer systems for subsurface flows. Both require detailed soils and geological information. The pathways to surface and groundwater resources can then be identified. Details of land management, farm management practices (including animal and manure management) and agronomic practices have to be obtained, possibly from questionnaires completed by each producer within the watershed. To confirm that potential pathways are active requires some microbial source tracking. One possibility is to identify the molecular types of Escherichia coli present in each hazard on a farm. An essential part of any such index is the identification of mitigation strategies and practices that can reduce the magnitude of the hazard or block open pathways.     

HACH氨氮水质自动监测分析仪进口试剂国产化配方研究

分析HACH氨氮自动监测分析仪所用进口试剂配方中氧化剂、显色剂、催化剂、掩蔽剂、缓冲液的组分、试剂用量、反应机理、吸收光谱、酸碱度、发色时间和温度、显色产物的稳定性、灵敏度、干扰及消除,以及存放条件的差异,自行研发国产配方,并将该国产配方试剂与进口试剂做试验比对,结果 2种试剂的效能无显著差异。