快速城市化背景下的思雅河流域水环境分析

通过对思雅河流域连续3年的水环境质量监测,结合遥感影像获得其土地利用类型变化,据此研究城市化对水环境的影响。结果表明:2012—2014年间思雅河流域自然、农业景观面积占比减少,而建设用地面积持续增加;研究期间除TDS年均值略微下降外,其余水质指标的年均值几乎均呈递增趋势,尤以TSS和COD增加最显著;TSS、COD、NH 3-N和TP的相对标准偏差均>0.1,显著高于其余参数,说明其波动程度较大。主成分分析表明水环境变化最主要的影响因子为第一主成分(TSS、COD、NH 3-N和TP)。贵安新区大学城建设活动加重了思雅河流域水体污染趋势。     

响应面法优化预氧化强化混凝处理铁锰地下水

以KMnO_4为氧化剂,Al_2(SO_4)_3·18H_2O为混凝剂,含铁锰离子地下水为模拟用水,考察预氧化强化混凝法的效果。利用响应面设计试验,分析氧化剂投加量、混凝剂投加量和pH值对铁锰去除的交互作用。模型优化结果显示,在氧化剂投加量4.16 mg/L,混凝剂投加量263.68 mg/L,pH值为7.54的最佳工艺参数下,铁锰去除率分别可达98.22%和97.49%。     

便携式GC-MS仪快速测定水中硝基苯及其在应急监测中的应用

采用便携式GC-MS仪快速测定水中硝基苯,通过优化水中离子强度和顶空加热时间,使方法在0μg/L^300μg/L范围内线性良好,方法检出限为2.5μg/L。标准溶液6次测定结果的RSD为7.8%~10.9%,实际水样的加标回收率为80.7%~103%。同步测定试验表明,硝基苯与7种苯系物分离良好。与国标方法对比,该方法单个样品测定时间由2 h缩短为15 min。将该方法用于应急监测工作中,及时有效的数据可为污水处理及事故调查提供分析和研判依据。     

面向实时人群动力学分析的深度基本图网络

当前行人疏散实验中基本图计算方法通常是通过对每个行人进行跟踪实现的.但这种跟踪方法难以实现实时人群动力学分析.针对这一问题,提出了深度基本图网络.实验提出的网络框架由两个模块组成,即多尺度递归卷积神经网络(MSR-Net)和光流模块,分别对行人密度和行人速度进行估计.具体来讲,MSR-Net学习了输入图像与行人密度图之...     

Kinetics and thermodynamic studies of Methyl Orange removal by polyvinylidene fluoride-PEDOT mats

We report the preparation of poly(3,4-ethylene dioxythiophene) (PEDOT)-modified polyvinylidene fluoride electrospun fibers and their use as a novel adsorbent material for the removal of the anionic dye Methyl Orange (MO) from aqueous media. This novel adsorbent material can be used to selectively remove MO on a wide pH range (3.0–10.0), with a maximum capacity of 143.8 mg/g at pH 3.0. When used in a recirculating filtration system, the maximum absorption capacity was reached in a shorter time (20 min) than that observed for batch mode experiments (360 min). Based on the analyses of the kinetics and adsorption isotherm data, one can conclude that the predominant mechanism of interaction between the membrane and the dissolved dye molecules is electrostatic. Besides, considering the estimated values for the Gibbs energy, and entropy and enthalpy changes, it was established that the adsorption process is spontaneous and occurs in an endothermic manner. The good mechanical and environmental stability of these membranes allowed their use in at least 20 consecutive adsorption/desorption cycles, without significant loss of their characteristics. We suggest that the physical-chemical characteristics of PEDOT make these hybrid mats a promising adsorbent material for use in water remediation protocols and effluent treatment systems.     

基于CA的城市形态扩展多解模拟——以北京市东部平原区情景分析为例

构建了一个基于人工神经网络的约束型城市扩展CA模型。利用该模型,预测了北京市东部平原区在3种情景规划之下的未来50年的城市形态,为不同的城市发展模式之间的比较分析奠定基础。然后以2024年的北京东部平原区模拟城市形态为基准,从自然生态功效、社会服务功效、经济利益功效3个方面对3种规划模式进行了情景分析,从而系统的比较了3种规划模式的复合生态功效,为城市规划决策提供有力的支持。     

我国汽车报废回收利用体系框架初探

主要介绍了国内外废旧汽车回收处理现状,并从法制建设、回收网络构建、回收技术研究、宣传教育等方面提出了我国应对废旧汽车回收利用的对策建议。     

土壤渗滤处理系统运行控制的模拟研究

通过建立地下水数学模型,回答了土壤渗滤工程运行控制中的两个难点问题:(1)工程运行水力负荷.当工程地块周边存在河流时,河流水位低时,有助于增加水力负荷,反之则降低水力负荷;实际土壤运行面积的增加和独立运行单元之间的间距增加也能够增加工程运行水力负荷.(2)地下水水质监测井的优化布设.模拟工程运行后地下水水质空间分布特征,在地下水水质最不利的位置和其他特别关注的位置布置监测井,从而能够以具有典型代表性且数目较少的监测井达到准确评估工程对地下水水质影响的目的.     

原料含水率及成型直径对秸秆成型燃料耐久性的影响

原料含水率及成型直径对秸秆成型燃料耐久性具有重要影响,通过试验发现含水率对秸秆固化成型(SDBF)技术的抗渗水性影响很显著,原料含水率10%～15%(质量分数,下同)范围内得到的SDBF渗水分解超过4 h;原料含水率也显著影响SDBF的抗跌碎性,含水率不大于15%的SDBF失重率一般不超过5%,能满足规模化技术的应用.对于HPB-成型机生产的SDBF,成型直径大的SDBF抗渗水性时间较长,随着成型直径减小抗渗水性时间减少,抗渗水性能降低.     

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.