安全降变原理及C-S-R事故致因新模型

为发展安全科学原理和给事故防控与调查提供新的方法,根据变化对系统安全的影响机制,开展安全降变原理及事故致因新模型研究。首先,提出安全降变原理并解析其内涵及研究意义。其次,基于安全降变原理,给出不同层级安全系统变化的分类实例,并对作业场所事故及其致因重新定义和分类。再次,构建基于安全降变原理的C-S-R事故致因新模型。最后,基于事故案例分析,验证所提出的C-S-R事故致因新模型与安全降变原理的有效性。结果表明,各级安全系统中自发或是受联动的变化超出系统的变化承受水平时,将导致事故的发生。经事故案例分析验证可知,安全降变原理及C-S-R事故致因新模型具有充分的实用性。     

超高强度钻杆低温断裂性能及裂纹扩展特征研究

超高强度钻杆在冬季低温环境下容易发生脆性断裂事故,为了从断裂力学角度揭示其冷脆现象的本质,采用ZBC2302-D型示波冲击试验机,获得了不同温度下超高强度钢在冲击断裂过程中的力-位移曲线,并对比分析了冲击功、起裂功和裂纹扩展功之间的变化关系。采用国家标准GB 4161—2007中的计算公式,计算了冲击试样的裂纹扩展量Δa和阻抗应力强度因子K_R;同时,引入K_R阻力曲线,得到超高强度钻杆在不同温度下的剩余强度图。结果表明,当冲击试样开始出现裂纹时,随温度降低,钻杆的初始起裂应力有所增加,出现硬化现象。当钻杆出现一定长度的裂纹时,随温度降低,阻抗应力强度因子越来越小,而且降低速度越来越快,剩余强度也表现出相同的变化趋势。随温度降低,材料抵抗裂纹扩展的能力逐渐下降,表明钻杆在低温下更容易断裂。     

三种强度准则的盐穴应力弹塑性解及参数敏感性分析

为了更安全地建造地下盐穴储气库，采用Hoek-Brown(H-B)，Mohr-Coulomb(M-C)及Drucker-Prager(D-P)3种强度准则，推导了在内压作用下盐穴的塑性区应力解及塑性半径，讨论了各准则对塑性区半径的影响规律及各准则参数的估计方法。分别运用单因素分析法及多因素分析法，分析了塑性半径对H-B准则参数的敏感性。研究结果表明:同等条件下，H-B准则受岩性、造腔等因素影响时，微小内压的波动使得塑性半径的变化更剧烈，岩体质量较差时更显著。盐穴塑性应力与M-C，D-P相比偏小，更接近实际工程状况。围岩塑性半径受H-B准则参数影响程度的大小依次为:GSI，mi，σci，D。各参数的互相关性对结果影响不大。其中，H-B准则参数GSI，mi，σci的增大会使塑性半径减小，参数D的增大使得塑性区半径增大。研究成果可为合理选择盐穴储库硐室的力学模型及优化参数提供参考价值。     

The potential of vehicle and road infrastructure interventions in fatal bicyclist accidents on Swedish roads—What can in-depth studies tell us?

Abstract

Objective: The objective of this article is to describe the characteristics of fatal crashes with bicyclists on Swedish roads in rural and urban areas and to investigate the potential of bicycle helmets and different vehicle and road infrastructure interventions to prevent them. The study has a comprehensive approach to provide road authorities and vehicle manufacturers with recommendations for future priorities.

Methods: The Swedish Transport Administration’s (STA) in-depth database of fatal crashes was used for case-by-case analysis of fatal cycling accidents (2006–2016) on rural (n?=?82) and urban (n?=?102) roads. The database consists of information from the police, medical journals, autopsy reports, accident analyses performed by STA, and witness statements. The potential of helmet use and various vehicle and road infrastructure safety interventions was determined retrospectively for each case by analyzing the chain of events leading to the fatality. The potential of vehicle safety countermeasures was analyzed based on prognoses on their implementation rates in the Swedish vehicle fleet.

Results: The most common accident scenario on rural roads was that the bicyclist was struck while cycling along the side of the road. On urban roads, the majority of accidents occurred in intersections. Most accidents involved a passenger car, but heavy trucks were also common, especially in urban areas. Most accidents occurred in daylight conditions (73%). Almost half (46%) of nonhelmeted bicyclists would have survived with a helmet. It was assessed that nearly 60% of the fatal accidents could be addressed by advanced vehicle safety technologies, especially autonomous emergency braking with the ability to detect bicyclists. With regard to interventions in the road infrastructure, separated paths for bicyclists and bicycle crossings with speed calming measures were found to have the greatest safety potential. Results indicated that 91% of fatally injured bicyclists could potentially be saved with known techniques. However, it will take a long time for such technologies to be widespread.

Conclusions: The majority of fatally injured bicyclists studied could potentially be saved with known techniques. A speedy implementation of important vehicle safety systems is recommended. A fast introduction of effective interventions in the road infrastructure is also necessary, preferably with a plan for prioritization.     

Water sharing agreements sustainable to reduced flows

By signing a water sharing agreement (WSA), countries agree to release an amount of river water in exchange for a negotiated compensation. We examine the vulnerability of such agreements to reduced water flows. Among all WSAs that are acceptable to riparian countries, we find out the one which is self-enforced under the most severe drought scenarios. The so-called upstream incremental WSA assigns to each country its marginal contribution to its followers in the river. Its mirror image, the downstream incremental WSA, is not sustainable to reduced flow at the source. Self-enforcement problems can be solved by setting water releases and compensations contingent to water flow. We apply our analysis to the Aral Sea Basin. We compute the upstream incremental compensations for the Bishkek agreement and asses its vulnerability with historical flows.     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis

IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization.     

氢安全研究现状及面临的挑战

氢能具有储运便捷、来源多样、洁净环保等突出优点,许多国家把发展氢能作为重要的能源战略。氢安全是氢能大规模商业化应用的重要保障。在分析国内外氢安全领域近年来最新研究进展的基础上,依次从氢泄漏与扩散、氢燃烧与爆炸、氢与金属材料相容性及氢风险评价等方面,系统总结了国内外氢安全研究面临的挑战,并对我国氢安全的发展提出了建议。     

城市电力供应系统公共安全风险评估体系及应用

城市电力供应系统与城市公共安全关系紧密，文章分析了导致城市电力供应系统故障或事故的主要风险因素、事故类型及其风险程度，建立了城市电力供应系统公共安全风险评估体系。利用建立的风险评估体系，对某市电力供应系统的安全性进行了风险评估，同时验证了该体系在城市电力供应系统风险评估中的良好适用性。     

驾驶员风险认知能力对交通安全的影响

为辨别不同驾驶员风险认知能力对驾驶安全的影响。通过设置13种存在潜在风险的交通情景,引入惩罚用时机制,利用驾驶模拟器,对熟练驾驶员和非熟练驾驶员在风险认知培训前后的风险认知能力进行比较,找出不同驾驶员对风险认知的差异。试验结果显示,熟练驾驶员的风险认知能力比非熟练驾驶员要高,两者在引起交通风险的因素上是不同的,培训后的风险认知能力较之前有很大提高。培训能够拓宽驾驶员对潜在风险的认知程度,更好地将驾驶员的操作技能、知识体系和外在行为衔接在一起,从而减少交通事故的发生。