OPTIMIZATION MODELING OF A NEW FACILITY FOR THE CALIFORNIA STATE WATER PROJECT1

ABSTRACT: A non-linear optimization model is applied to the California State Water Project (SWP) and portions of the Central Valley Project (CVP). The model accounts for the major hydrologic, regulatory, and operational features of both projects. The model maximizes long-term SWP yields over a 70-year period, using a quarterly time step. The potential for increased yield associated with a proposed facility improvement is evaluated with the model. The proposed facility is an extension of the Folsom-South Canal, which would allow water to be conveyed from the American River below Folsom Reservoir into New Melones Reservoir on the Stanislaus River or into the California Aqueduct. Model results indicate that extension of the Folsom-South Canal has the potential to increase SWP yields by 13 percent.     

MODELING THE BUILDUP AND WASHOFF OF POLLUTANTS ON URBAN WATERSHEDS1

ABSTRACT: A model for urban stormwater quality was developed in this study. The basis for the model is the process by which pollutants build up on the watershed surface. For the wet climate of the study site, it was assumed that there exists an interval of time over which the pollutant buildup equals the pollutant washoff (no accumulation of pollutant). The buildup model was represented by a linear function of the antecedent dry time. The buildup function was then linked with a pollutant washoff model represented by a power function of the storm runoff volume. Various time intervals for no net accumulation were tested to calibrate the model. The model was calibrated to observed data for two small urban basins in Baton Rouge, Louisiana, and model results were used to analyze the behavior of phosphorus concentrations in storm runoff from these basins over a long period of time.     

PESTICIDES AND PESTICIDE DEGRADATION PRODUCTS IN STORMWATER RUNOFF: SACRAMENTO RWER BASIN,CALIFORNIA1

ABSTRACT: Pesticides in stormwater runoff, within the Sacramento River Basin, California, were assessed during a storm that occurred in January 1994. Two organophosphate insecticides (diazinon and methidathion), two carbamate pesticides (molinate and carbofuran), and one triazine herbicide (simazine) were detected. Organophosphate pesticide concentrations increased with the rising stage of the hydrographs; peak concentrations were measured near peak discharge. Diazinon oxon, a toxic degradation product of diazinon, made up approximately 1 to 3 percent of the diazinon load. The Feather River was the principal source of organophosphate pesticides to the Sacramento River during this storm. The concentrations of molinate and carbofuran, pesticides applied to rice fields during May and June, were relatively constant during and after the storm. Their presence in surface water was attributed to the flooding and subsequent drainage, as a management practice to degrade rice stubble prior to the next planting. A photo-degradation product of molinate, 4-keto molinate, was in all samples where molinate was detected and made up approximately 50 percent of the total molinate load. Simazine, a herbicide used in orchards and to control weeds along the roadways, was detected in the storm runoff, but it was not possible to differentiate the two sources of that pesticide to the Sacramento River.     

正交化方法在水质模型参数确定中的应用

本文根据常微分方程参数反问题的数学理论，将正交化方法同有限差分法结合用于确定水质模型参数，并与正则化方法、最速下降法和共轭梯度法作了比较。其计算结果对比表明，正交化方法具有快速、简便、可靠的特点。更适合于水质模型参数的确定。     

Characteristics of large cooking oil pool fires and their extinguishment by water mist

Large cooking oil pool fires, occurring in industrial oil cookers, present a severe hazard to food processing plants due to their size and the large amount of hot oil involved. This paper reports a series of full-scale fire experiments conducted in a large industrial oil cooker mock-up. The characteristics of large cooking oil pool fires and the effect of oil depth and hood position in the oil cooker on fire growth were studied. The use of water mist for extinguishing large oil pool fires and their extinguishing performance under different discharge pressure and with different types of water mist systems were investigated. Experimental results showed that the cooking oil underwent a substantial expansion in volume during heating. The fires developed quickly once the oil auto-ignited. The fire growth rate was affected by the oil depth in the pan and the hood position in the oil cooker. The water mist fire suppression systems effectively extinguished large cooking oil fires and prevented them from re-igniting. Their extinguishing performance was determined by the type of water mist system, discharge pressure and hood position in the oil cooker.     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.     

电力工业发展与环境保护

从我国电力工业发展历程、面临的主要环境问题、污染控制等方面全面简述我国电力工业环境保护取得的发展与成就；展望“十一五”电力发展目标及电力环保指标；分析了为实现环境目标需要实施的污染控制措施。     

浅谈沱江泸州大磨子水质自动监测系统的改进

本文对沱江流域泸州大磨子水质自动监测系统运行初期的部分改进进行了分析与陈述，并根据对长江流域泸州沱江二桥水质自动监测站和泸州大磨子水质自动监测站的经验，总结出该系统部分改进前后的利与弊，希望能给岷、沱江流域各水质自动监测站的管理人员和仪器设备商提供借鉴。     

我国石油工业环境保护相关法律问题

目前,我国对石油工业领域环境保护立法,采取的是特殊行业规制与一般规制相结合的模式。总体上看,我国石油工业环境保护领域已建立起初步的法制框架,但仍须进一步完善立法、执法、制订应急预案和建立信息公开机制等。     

回转窑煅烧石油焦清洁生产方案研究

在回转窑煅烧石油焦的过程中,大量的高温烟气和比较严重的粉尘是污染环境的主要因素。文章以清洁生产理论为依据,综合论述了回转窑煅烧石油焦全过程,并对污染处理和资源、能源综合利用等方案进行了研究。在我国,比较成熟的清洁生产技术是采用余热回收蒸汽和袋式除尘技术。回转窑产能大,机械化程度较高,投资少,建设速度快,所产生的污染物易控制,维修费用低,换料容易,是大规模煅烧焦厂家应优先采用的石油焦煅烧设备。