Optimization of a Wind/PV Hybrid Power Generation System

This study investigates the wind and solar electricity generation availability at the Solar Energy Institute of Ege University, Izmir, Turkey. The main purpose of this study is to design an appropriate wind-PV hybrid system to cover the electricity consumption of the Institute. In order to do this, monthly average solar irradiation and wind speed data are used, which were measured, consisting of hourly records over an eight-year period from 1995–2002. Simple models were developed to determine wind, solar, and hybrid power resources per unit area. Correlations between the solar and wind power data were carried out on an hourly, daily, and monthly basis. It is shown that the hybrid system can be applied for the efficient and economic utilization of these resources.     

An Analysis of the Wind Energy Potential of Elazig,Turkey

Abstract

In this study, the wind energy potential of Elazig is statistically analyzed based on hourly measured wind speed data over the five-year period from 1998 to 2002. The probability density distributions are derived from cumulative distribution functions. Two probability density functions are fitted to the measured probability distribution on a yearly basis. The wind energy potential of the location is studied based on the Weibull and Rayleigh distributions. It was found that the numerical values of both Weibull parameters (k and c) for Elazig vary over a wide range. The yearly values of k range from 1.653 to 1.878 with an average value of 1.819, while those of c are in the range of 2.757–2.994 m/s with an average value of 2.824 m/s. In addition, yearly mean wind speed and mean power density of Elazig is found as 2.79 m/s and 38.76 W/m², respectively. The wind speed distributions are represented by Weibull distribution and also by Rayleigh distribution, with a special case of the Weibull distribution for k = 2. As a result, the Rayleigh distribution is found to be suitable to represent the actual probability of wind speed data for Elazig.     

Carbon neutral Biggar: calculating the community carbon footprint and renewable energy options for footprint reduction

The objective of this research was to develop a community carbon footprint model that could be used to assess the size and major components of a community’s carbon dioxide (CO₂) emissions. The town of Biggar aims to become Scotland’s first carbon neutral town. As expected for this rural community, car transport accounted for nearly half of the CO₂ emissions, with natural gas and electricity consumption resulting in a further 24% and 12% of total emissions, respectively, and air travel being the last major component at 10% of emissions. An assessment was also made of the wind and solar resources of the town. One large wind turbine would provide the town’s electricity, while three to four turbines would be needed to offset all CO₂ emissions. In contrast, offsetting by tree planting would require in the region of 2,000 ha of trees.

烟气同时脱硫脱硝技术探讨

开发先进的烟气治理技术,控制二氧化硫和氮氧化物排放是国内外脱硫脱硝研究的一大热点。本文简述了同时脱硫脱硝技术的工作机理及其优缺点,从反应机理、技术特点和工程应用等方面,介绍了烟气同时脱硫脱硝技术的研究进展情况,并对其应用前景进行了预测。     

Movement distances enhance validity of predictive models

Including the distance species are able to move in predictive models improves conservation practice. Bird inventory projects carried out from 1993 to 2004 in Taiwan provide an opportunity to investigate the relationships among species distribution, movement distance, and the environment. We compared projected distributions of 17 Taiwanese endemic bird species using what we called the Standard Method (i.e. movement distance is zero) and what we called the Buffer Method (i.e. movement distance is longer than zero) in three presence-only models (GARP, MAXENT and LIVES). The Standard Method used species original occurrence records directly while the Buffer Method expanded the occurrence of species to areas 1 km² around each recorded location. We first tested the efficacy of the Buffer Method using ten common species of the 17, and then applied the method to two rare species of the 17. For both the common and rare species, the distributions predicted by the two methods showed slight but important differences. The Buffer Method for all species had a higher average predictive probability, while the Standard Method had a higher maximum predictive probability. Most of the values for the area under the curve (AUC) were over 0.8 with the exceptions of Taiwan Barbet (Megalaima nuchalis) and Taiwan Hwamei (Garrulax taewanus), which have recently separated from Indochinese Barbet (Megalaima annamensis) and Chinese Hwamei (Garrulax canorus), and since 2008 and 2006 have been regarded as species endemic to the study area. Kappa values showed good performance for all species using both methods. The Buffer Method, however, resulted in significantly higher sensitivity and accuracy values for all models of species (p < 0.05). We conclude that when modeling species distribution including the area where the species was censused along with areas within the minimum movement areas better defines the surrounding areas that might supplement core habitat requirements. Therefore, using the Buffer Method, species surrounding distribution can be obtained which provides a better understanding of the species distributions. Given that distribution size is a key to the conservation of species, we suggest the Buffer Method can be used in conservation planning.     

基于重要抽样法的耐压球壳可靠性计算方法研究

目的 解决耐压球壳极小失效概率的可靠性计算问题。方法 在自适应Kriging的基础上,结合重要抽样法提出耐压球壳可靠性计算方法。该方法在较大失效概率下构建的Kriging模型基础上获得重要方向,在重要方向上计算得到较低失效概率下的设计点,以设计点为中心,构建小失效概率的Kriging模型,并通过此模型采用重要抽样法开展可靠性计算。结果 分别使用提出的重要抽样法和蒙特卡洛法计算了2个算例的失效概率,计算结果表明,该方法具有较高的精度和效率。使用该方法对某耐压球壳工作载荷下的失效概率进行了计算,计算得到该球壳失效概率为4.094×10^–96。结论 研究结果可为无失效方程下极低失效概率的可靠性计算问题提供参考。     

成果管理的政策导向刍议

从成果管理的政策导向必须是领导行为、成果管理的政策导向作用必须贯穿于管理的全过程、成果管理的政策导向作用是成果管理的原动力等方面探讨了成果管理的导向问题，从而提出了成果管理导向的参考做法。     

1994年江西省主要自然灾害综述

１９９４年江西省发生了历史上罕见的风雹灾害和洪涝灾害，受灾面积近４４万ｈａ，受灾人口１１４４万人，直接经济损失高达６３亿元，系全国重灾省份之一．本文对其中的三次主要自然灾害的灾因、灾情及减灾中的问题、经验和教训进行总结与分析。     

DEM AGGREGATION FOR WATERSHED MODELING1

ABSTRACT: The widely available USGS 7.5‐minute Digital Elevation Model (DEM) has a cell size of approximately 30 m × 30 m. This high resolution topographic information is impractical for many applications of distributed hydrologic and water quality models. In this study, cells were aggregated into coarse‐resolution areal units, termed grids, and a method to approximate flow direction for coarse‐resolution grids from 30 m DEM cells was developed. The method considers the flow path defined from the fine‐resolution DEM in determining a grid's flow direction and makes flow directions for grids closely follow the flow pattern suggested by the DEM. The aggregation method was applied to a DEM of Goodwater Creek, a nearly flat watershed that is located in central Missouri. The drainage networks derived for different levels of cell aggregations showed that grid aggregates of the Goodwater Creek watershed provided an adequate representation of the landscape topography.     

街道峡谷内汽车排放污染物浓度分布的观测与数值模拟

在上海某典型街道峡谷内按一定的空间布点,在一定时段内同时对各布点进行采样并做一氧化碳浓度分析,同时记录车辆种类、车流量、气象条件等,分析街道峡谷内污染物浓度的分布.运用风向频率加权(WDFW)方法,结合大气流动和污染物扩散的CFD模型进行数值模拟计算.结果表明,数值模拟结果和现场观测结果较吻合,建筑物低的一侧污染物浓度远高于建筑物高的一侧污染物浓度,两侧的污染物浓度随着高度的增加而降低.