Effect of manufacturing methods of AgCl/Al2O3 catalyst on selective catalytic reduction of NOx

The AgCl/Al2O3 catalyst has potential for use in the selective catalytic reduction (SCR) of NOx. A compound hydrocarbon, following oxygenation is used as a type of reducing agent. In this experiment, the AgCl/Al2O3 catalyst was produced by four different methods, and the differences among their reduction catalysis of NOx were compared. Ethanol was used as a type of reducing agent. X-ray diffraction analysis was performed to study the crystalline structure and scanning electron microscope and transmission electron microscope (TEM) were applied to determine the microindentation. The results indicated that, in the range of 350–400°C, there was no significant difference on the NOx reduction rate; however, there was dispersion at high and low temperature ranges. The size of the AgCl particles was about 20–100 nm.     

Ultrasonic preparation of nano-nickel/activated carbon composite using spent electroless nickel plating bath and application in degradation of 2,6-dichlorophenol

Ni was effectively recovered from spent electroless nickel （EN） plating baths by forming a nano-nickel coated activated carbon composite. With the aid of ultrasonication, melamine- formaldehyde-tetraoxalyl-ethylenediamine chelating resins were grafted on activated carbon （MFT/AG）. PdC12 sol was adsorbed on MFT/AC, which was then immersed in spent electroless nickel plating bath; then nano-nickel could be reduced by ascorbic acid to form a nano-nickel coating on the activated carbon composite （Ni/AC） in situ. The materials present were carefully examined by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy and electro- chemistry techniques. The resins were well distributed on the inside and outside surfaces of activated carbon with a size of 120 ± 30 nm in MFT/AC, and a great deal of nano-nickel particles were evenly deposited with a size of 3.8 ± 1.1 nm in Ni/MFT. Moreover, Ni/AC was successfully used as a catalyst for ultrasonic degradation of 2.6-dichloronhenol.     

利用X射线吸收近边结构光谱(XANES)研究水泥窑共处置产品中Ni和Cd的微观组成

在模拟水泥窑中高温煅烧掺有Ni、Cd化学试剂的水泥生料,并由制取的水泥熟料制备水泥净浆片.利用X射线吸收近边结构光谱（XANES）对水泥窑共处置产品中Ni、Cd的微观组成进行了研究.结果表明：Ni在水泥窑煅烧过程中发生了较为彻底的化学变化,形成了Ni-Mg化合物,该化合物可能是以氧化物、氢氧化物或碳酸盐的形式存在;水泥...     

Effects of metal cations on sorption-desorption of p-nitrophenol onto wheat ash

The mutual e ects of metal cations (Cu2+, Pb2+, Zn2+, and Cd2+) and p-nitrophenol (NP) on their adsorption desorption behavior onto wheat ash were studied. Results suggested that Cu2+, Pb2+, and Zn2+ diminished the adsorption and increased the desorption of NP remarkably, while Cd2+ had no such e ect. In contrast, NP diminished the adsorption of Cu2+, Pb2+, and Zn2+ onto ash, however, this suppression e ect depended on the initial concentrations of metal cations. NP had no e ect on Cd2+ adsorption on ash. Fourier transform infrared (FT-IR) and X-ray absorption spectroscopic (XAS) studies suggested the following mechanisms responsible for the metal suppression e ect on NP adsorption: (1) large hydrated Cu2+, Pb2+, and Zn2+ shells occupied the surface of ash and prevent nonspecific adsorption of NP onto ash surface; (2) Cu2+, Pb2+, and Zn2+ may block the micropores of ash, resulting in decreased adsorption of NP; (3) complexation of Cu2+, Pb2+, and Zn2+ was likely via carboxyl, hydroxylic and phenolic groups of wheat ash and these same groups may also react with NP during adsorption. As a “soft acid”, Cd2+ is less e cient in the complexation of oxygencontaining acid groups than Cu2+, Pb2+, and Zn2+. Thus, Cd2+ had no e ect on the adsorption of NP on wheat ash.     

三硝基甲苯的γ-辐照降解实验研究

基于三硝基甲苯(TNT)溶液采用常规处理方法难以降解,采用60Co-γ射线对三硝基甲苯溶液进行辐照降解,研究了吸收剂量、初始浓度、溶液初始pH值、双氧水(H2O2)等因素对辐照降解效果的影响.实验结果表明,60Co-γ射线辐照能够有效地降解三硝基甲苯.三硝基甲苯溶液初始浓度为5—50 mg.L-1,当接受不超过15 kGy剂量时,三硝基甲苯的降解率可达100%,化学需氧量(COD)去除率可达55%;弱酸性和碱性环境更有利于三硝基甲苯的降解和COD的去除;加入少量H2O2时,三硝基甲苯降解率和COD去除速率均随之增加,但过高的H2O2加入量将会抑制三硝基甲苯的去除,并且加入H2O2的量愈大其抑制作用愈明显.     

同步辐射X射线荧光和吸收谱技术在环境汞污染研究中的应用进展

汞作为一种重要的全球性重金属污染物,被许多国际组织列为优先控制污染物。常规的汞分析手段,例如电感耦合等离子体质谱(ICP-MS)、原子荧光光谱(AFS)等,对汞的分析精度较高,方法比较成熟,但对样品前处理要求也较高。同步辐射技术由于其高、精、准的优势,且对样品前处理要求比较简单、可实现原位无损分析,因此被广泛应用于环境样品的分析中。随着研究的发展,同步辐射X射线荧光光谱(SRXRF)和同步辐射X射线吸收光谱(SRXAS)技术在环境汞污染分析领域得到了越来越多的应用。主要介绍了我国环境汞污染现状及污染特征,同步辐射技术对于汞分布蓄积、含量和化学形态分析方面的独特优势,重点回顾了本项目组和其他一些研究组近几年关于SRXRF和SRXAS技术在环境介质如土壤、植物体内汞的分布蓄积、相对含量和化学形态转化研究领域的应用进展,对进一步发展并提高同步辐射技术在环境及生物体汞污染水平、毒性机理和生态毒理评价方面的应用进行了展望。     

掺钴水钠锰矿对铅的吸附及对砷的氧化

为了研究过渡金属离子掺杂对锰氧化物作为环境友好材料物理化学性质的影响,在浓盐酸还原高锰酸钾制备水钠锰矿过程中添加氯化钴,在常压回流条件下一步合成了三维纳米微球状水钠锰矿,考察了其铅吸附和砷氧化能力.应用粉晶X射线衍射、化学分析、N2物理吸附、场发射扫描电镜（FE-SEM）、X射线光电子能谱（XPS）等手段表征产物晶体结...     

pH对MAP沉淀法去除废水中氨氮的影响

本文用模拟废水进行了磷酸铵镁（MAP）沉淀法脱氮试验，着重分析了pH值对沉淀种类及晶态的影响，试验结果表明MAP沉淀法废水脱氮的适宜pH值在9．0～10．5之间，在此范围内氨氮去除率和沉淀量随pH值升高而增加，生成MAP比较纯净。用污泥回流液进行验证试验，结果表明MAP沉淀法在处理实际废水时具有良好的效果。     

承压设备射线检测相关标准关键技术解析

本文针对承压设备射线数字成像检测人员资格培训考核和现场使用过程中重点关注的NB/T 47013标准的技术要点进行解析.通过分析图像质量评价指标的含义及像质计的不同用途,论述数字成像和胶片照相的异同点;针对射线数字成像标准对图像处理技术应用的原则和要求,剖析图像处理的目的和使用的前提,明确图像处理技术在图像质量评价和缺陷...     

硫氰根的γ射线辐照降解研究

研究了60Co源γ射线辐照降解SCN-.在溶液pH=1、pH=3时,25 mg/L的SCN-在6kCy下基本能够得到降解,降解率分别达到98.11%、95.97%, pH=7时,在9kCy下, SCN-的降解率为99.33%;但在碱性条件下,18 kGy的剂量下,才能得到降解,达99.64%(PH=10)和99.93%(pH=12).在高浓度下, SEN-溶液的降解则需要更大的剂量.通过对辐照后的SCN-溶液TOC 和TN的测定可知:辐照法对SCN-溶液除去TOC和TN效果不明显,不同剂量辐照后溶液中SO2-4和NO-3浓度的变化表明, SCN-在γ射线辐照过程中可能的反应历程为:硫元素首先被除去,转变成SO2-4而氮元素则很少转变成NO-3主要是以其它形式的氮存在.