Effect of transition metal doping under reducing calcination atmosphere on photocatalytic property of TiO2 immobilized on SiO2 beads

TiO₂ immobilized on SiO₂ (TiO₂/SiO₂) have been prepared by sol-gel method and various ions of transition metals (Cr³⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) were doped on the photocatalyst using wet impregnation method under reducing calcination atmosphere. The photocatalytic activity of metal doped TiO₂/SiO₂ towards phenol degradation under black light irradiation were investigated and compared with undoped TiO₂/SiO₂. The results showed that the photoresponse of Cu²⁺ and Zn²⁺ doped TiO₂/SiO₂ were larger than undoped TiO₂/SiO₂, indicating that the photogenerated carriers were separated more efficiently in Cu²⁺ and Zn²⁺ doped TiO₂/SiO₂. The reactivity was in the order of Cu²⁺ > Zn²⁺ > Ni²⁺ > Cr³⁺ > Co²⁺. The different photoreactivity was ascribed to combine effect of the different ionic radii and photocorrison tendency of the dopants. The sample was also characterized by surface analytical methods such as X-ray diffraction, scanning electron micrograph/electron dispersive X-ray analyzer and UV-Vis absorption spectrum.     

Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

电离辐射环境监测的物理方法的研究

随着核技术的不断发展,环境中的电离辐射日益增多、增强,加上人们环境保护意识的不断提高,环境监测变得越来越重要,同时也提高了电离辐射环境监测的要求。电离辐射环境监测的物理方法主要包括了对环境样品及环境辐射场的分析测量。本文从电离辐射的概念出发,重点分析了电离辐射环境监测的物理方法。     

X射线光电子能谱在HTPB推进剂老化机理研究中的应用

采用X射线光电子能谱（XPS）法研究了HTPB推进剂在80℃热空气烘箱内分别老化0周、13周和24周的元素组成、化学价态及含量变化。通过拟合C,O,N,Cl等元素的XPS谱图,推测该推进剂在常温（25℃）贮存老化初期应是氧化交联,后期则出现降解断链,并认为NH4ClO4缓慢分解,攻击C C不饱和双键,使得C C双键含量降低是HTPB推进剂老化失效的主要原因。Al粉被包裹在推进剂粘合剂内部,XPS法未能检出Al粉。由于Al粉比较稳定,不参与推进剂老化过程,故XPS仍可用于HTPB推进剂老化机理研究。     

扎当冰川雪坑中不同粒径微粒元素和矿物组成特征

为了研究雪冰中不溶性微粒的矿物和元素组成及其来源,2009年5月和7月在念青唐古拉山扎当冰川垭口采集了2个雪坑样品,采用质子激发X荧光分析（PIXE）和X射线衍射定量分析方法（XRD）测定了不同季节粗细微粒（d〉10μm和0.22μm     

微生物絮凝剂ZS-7的纯化及其结构特征研究

采用透析、乙醇沉淀、凝胶过滤层析对微生物絮凝剂ZS-7进行了纯化.经鉴定纯化后的微生物絮凝剂ZS-7是一种新型的糖蛋白,其产量大约为0.98 g/L发酵液.ZS-7主要由多糖和蛋白质组成,含量分别为91.5%和8.4%.进一步的分析表明ZS-7中含有酸性多糖包括糖醛酸(16.4%)、丙酮酸(7.1%)和乙酸(0.5%).采用凝胶色谱法测得ZS-7的相对分子质量为6.89×104.红外光谱、X射线能谱图和核磁共振图谱说明糖蛋白絮凝剂ZS-7含有羟基、氨基、羧基、甲氧基和磺酸等功能性基团.单糖组成分析说明ZS-7主要由鼠李糖、甘露糖、葡萄糖和半乳糖组成,各单糖的摩尔比大致为:半乳糖∶葡萄糖∶甘露糖∶鼠李糖=142∶2.2∶4.5∶3.4.     

实车三效催化剂表面成分分析

对主要在北京行驶的总里程在34×104～59×104km的6辆轻型出租车用三效催化剂,利用X射线荧光光谱仪(XRF)分析了其表面元素的种类、含量,以及污染物元素含量与行驶里程的关系.结果表明,在催化剂表面检测到的元素种类近30种,含量较高的元素种类基本相同.前后级催化剂上检测到的共同污染物元素有P、Ca、Zn和Mn等,主要来自于机油和汽油,34×104km行驶里程后,P在催化剂的累积速度已非常缓慢,Ca、Zn和Mn在催化剂表面的沉积经过56×104km后仍有增加的趋势.在后级催化剂上还检测到了明显的S含量,说明S更容易在后级催化剂上沉积.经过40×104km行驶里程后,S在催化剂表面的沉积量基本达到平衡状态.累积规律说明经过40×104km行驶里程后,容易使催化剂中毒的P和S对催化剂活性影响已较小,而Ca、Zn和Mn的持续累积,将会继续降低催化剂的活性.     

利用X射线吸收近边结构光谱(XANES)研究水泥窑共处置产品中Ni和Cd的微观组成

在模拟水泥窑中高温煅烧掺有Ni、Cd化学试剂的水泥生料,并由制取的水泥熟料制备水泥净浆片.利用X射线吸收近边结构光谱（XANES）对水泥窑共处置产品中Ni、Cd的微观组成进行了研究.结果表明：Ni在水泥窑煅烧过程中发生了较为彻底的化学变化,形成了Ni-Mg化合物,该化合物可能是以氧化物、氢氧化物或碳酸盐的形式存在;水泥...     

Effect of platinum on the photocatalytic degradation of chlorinated organic compound

TiO2 nanoparticles, doped with di erent Pt contents, were prepared by a modified photodeposition method using Degussa P-25 TiO2, H2PtCl6 6H2O and methanol as the solvents. The physicochemical properties of Pt/TiO2 were investigated by the nitrogen adsorption and desorption isotherm measurement technique, X-ray di raction analysis and photoluminescence spectra, respectively. Reaction rates from photocatalytic removal of dichloromethane over Degussa P-25 TiO2 and Pt/TiO2 were evaluated. The average diameter and BET surface area of the TiO2 catalyst particles were 300 nm and 50 m2/g, respectively. The degradation e ciency was 99.0%, 82.7%, 55.2%, and 57.9% with TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. And the degradation e ciency was 99.3%, 79.7%, 76.5%, and 73.4% with a 0.005 wt.% Pt/TiO2 at inlet concentrations of 50, 100, 200, and 300 ppm, respectively. In addition, we found that the photoluminescence emission peak intensities decreased with increases in the doping amount of Pt, which indicates that the irradiative recombination was weakened. Furthermore, the results showed that the UV/0.005 wt.% Pt/TiO2 process was capable of e ciently decomposing gaseous DCM in air.     

Fabrication and photoelectrocatalytic properties of nanocrystalline monoclinic BiVO4 thin-film electrode

Monoclinic bismuth vanadate(BiVO4) thin film was fabricated on indium-tin oxide glass from an amorphous heteronuclear complex via dip-coating.After annealation at 400,500,and 600°C,the thin films were characterized by X-ray diffraction,field emission scanning electron microscopy,X-ray photoelectron spectroscopy,and UV-Vis spectrophotometry.The BiVO4 particles on the ITO glass surface had a monoclinic structure.The UV-Visible diffuse reflection spectra showed the BiVO4 thin film had photoabsorption propertie...