Retrieval And Monitoring of Atmospheric Trace Gas Concentrations in Nadir and Limb Geometry Using the Space-Borne Sciamachy Instrument

The Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY) onboard the European Envisat spacecraft performs continuous spectral observations of reflected, scattered and transmitted sunlight in various observation geometries. A unique feature of SCIAMACHY is the capability of probing the atmosphere in three different observation geometries:The nadir, limb, and occultation measurement modes. In nadir mode, column densities of trace gases are retrieved with a spatial resolution of typically 30× 60 km using the Differential Optical Absorption Spectroscopy (DOAS) technique (Platt and Perner, 1983). Alternating with the nadir measurement, vertical profiles of absorber concentration in the stratosphere are derived in limb and occultation. In this paper we present an overview over some applications of SCIAMACHY data in space-based monitoring of atmospheric pollution. The DOAS algorithms for the retrieval of total column amounts from nadir spectra are briefly described and case studies of pollution events are presented. We also illustrate the technique used to derive stratospheric concentration profiles from limb observations and show comparisons with other remote sensing systems. Special emphasis will be given to techniques, which take advantage of SCIAMACHY's different viewing geometries. In particular, we will discuss the potential and limits of strategies to infer tropospheric abundances of O₃and NO₂.     

Sorption mechanisms of cephapirin, a veterinary antibiotic, onto quartz and feldspar minerals as detected by Raman spectroscopy

Raman spectroscopy was used to investigate sorption mechanisms of cephapirin (CHP), a veterinary antibiotic, onto quartz (SiO₂) and feldspar (KAlSi₃O₈) at different pH. Sorption occurs by electrostatic attraction, monodentate and bidentate complexation. The zwitterion (CHP^o) adsorbs to a quartz⁽⁺⁾ surface by electrostatic attraction of the carboxylate anion group (-COO⁻) at low pH, but adsorbs to a quartz⁽⁻⁾ surface through electrostatic attraction of the pyridinium cation, and possibly COO⁻ bridge complexes, at higher pH. CHP⁻ bonds to quartz⁽⁻⁾ surfaces by bidentate complexation between one oxygen of -COO⁻ and oxygen from carbonyl of an acetoxymethyl group. On a feldspar^(+/−) surface, CHP^o forms monodentate complexes between CO, and possible -COO⁻ bridges and/or electrostatic attachments to localized edge (hydr)oxy-Al surfaces. CHP⁻ adsorbs to feldspar⁽⁻⁾ through monodentate CO complexation. Similar mechanisms may operate for other cephalosporins. Results demonstrate, for the first time, that Raman techniques can be effective for evaluating sorption mechanisms of antibiotics.     

Sedimentology models from activity concentration measurements: application to the “Bay of Cadiz” Natural Park (SW Spain)

A previous study on seabed sediments of the Bay of Cadiz (SW of Spain) enabled us to identify several relations between sedimentological variables and activity concentrations of environmental radionuclides such as ¹³⁷Cs, ²²⁶Ra, ²³²Th and ⁴⁰K. In this paper the study has been extended to a large neighbouring inter-tidal area in order to establish if the above mentioned models can be generalized. As a result we have determined that the measured activity concentrations are closely to the values predicted by the theoretical models (correlation coefficient range = 0.85–0.93).     

一种火场多参量在线监测系统的设计与实现

火场氧浓度降低、大量烟气遮挡视线和吸入毒性气体是造成火灾中人员无法逃生而窒息死亡的三大主要因素.基于波长调制光谱和谐波探测技术,利用光源调制实现了气体浓度的谐波检测;采用激光烟浓度检测方法,测得减光系数,以表征烟雾浓度.通过合理高效的系统光路和硬件设计,采用分时复用方法,大大缩短了检测周期,每2.5秒便可完成一次对火场多参量的检测,实现了同时对火场中多参量(包括火灾产物中O2、CO、CO2、HCN的浓度和烟雾浓度)的在线实时监测.     

Effect of liming on the distribution of heavy metals in untreated industrial sewage sludge produced in Pakistan for the cultivation of <Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.)

The recycling of sewage sludge on agriculture land represents an alternative, advantageous, disposal of this waste material. The aim of the present study was to evaluate the feasibility of using industrial sewage sludge, produced in Pakistan, as a fertiliser. Agricultural soil amended with 25% (w/w) sewage sludge with or without lime treatment was used for growing a variety of sorghum (PARC-SS-1). The mobility of the heavy metals (HMs) (Cd, Cu, Cr, Ni, Pb and Zn) and metalloid (As) in the untreated industrial waste water sewage sludge (UIWS) samples were assessed by applying a modified BCR (Community Bureau of Reference) sequential extraction procedure. The single extraction procedure comprised of the application of mild extractant (CaCl₂) and water for the estimation of the proportion of easily soluble metal fractions. The precision and accuracy of BCR was evaluated by using a certified reference material of soil amended with sewage sludge BCR 483. The plant available metal contents, as extracted by the deionised water and 0.01 M CaCl₂ solution and exchangeable fraction of BCR sequential, decreased with lime application in the range of 10–44% for As, Cr, Ni, Pb and Zn, except in the cases of Cd and Cu, where their mobility was increased by 10% and 24%, respectively. Sludge amendment enhanced the dry weight yield of sorghum and the increase was more obvious after liming up to 25%. The uptake of HMs were lower in test samples (3.2–21.8%), except for Cu and Cd, which was higher (4%), while they were below the permissible limit of these metals. The present experiment demonstrates that liming was important in factors facilitating the growth of sorghum in sludge-amended soil.     

Studying soil organic matter using 13C CP-MAS NMR: the effect of soil chemical pre-treatments on spectra quality and representativity

¹³C CP-MAS NMR spectroscopy is a technique that has proved to be useful in studying soil organic matter (SOM). Nevertheless, NMR spectra exhibit a weak signal and have very low resolution due to: the low natural abundance of ¹³C (1.1 % of C) in SOM, the generally low SOM content of soils, and the presence of paramagnetic impurities. This paper studies the effects of soil chemical pre-treatments on ¹³CP-MAS NMR spectra quality and spectra representativity i.e. soil C mass balance.

After chemical pre-treatment to increase total organic carbon (TOC) content and C/Fe ratio, eight soils characterized by different levels of organic carbon content and C/Fe ratios were studied using ¹³CP-MAS NMR. Moreover, where chemical treatments were not applicable due to high carbon losses, the number of ¹³CP-MAS NMR scans was increased in order to obtain satisfactory spectra.

Results show that chemical pre-treatment of soils with C/Fe > 1 caused high C losses. Bulk soils were therefore studied by increasing the number of ¹³CP-MAS NMR scans. Acceptable spectra were obtained from 8K scans (1K = 1024 transient). On the other hand, even when a large number of scan (32K) are used, soil with C/Fe < 1 cannot be studied. As these soils are characterized by low C losses after HCl treatments (range of 2.9–25.4%), a pre-treatment of at least 1.39 mol l⁻¹ HCl removes excess Fe and at the same time increases C/Fe ratio resulting in 32K scans providing good spectra.     

Accumulation, speciation and cellular localization of copper in Sesbania drummondii

Growth, accumulation and intracellular speciation and distribution of copper (Cu) in Sesbania drummondii was studied using scanning-electron microscopy (SEM), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). The growth of seedlings was assessed in terms of biomass accumulation. The growth of the seedling was enhanced by 73.5% at a low Cu concentration (50 mg l⁻¹) compared to the control treatment. Additionally, seedling growth was inhibited by 18% at 300 mg l⁻¹ Cu with respect to the control. Copper concentration in roots and shoots was increased with increasing Cu concentration in the growth solution. The accumulation of Cu was found to be higher in roots than in the shoots. At a concentration of 300 mg l⁻¹ Cu, the roots accumulated 27,440 mg Cu kg⁻¹ dry weight (dw) while shoots accumulated 1282 mg Cu kg⁻¹ dw. Seedlings were assessed for photosynthetic activity by measuring chlorophyll a fluorescence parameters: F_v/F_m and F_v/F₀ values. Photosynthetic integrity was not affected by any of the Cu treatments. The X-ray absorption spectroscopic (XAS) studies showed that Cu was predominantly present as Cu(II) in Sesbania tissue. In addition, from the XAS studies it was shown that the Cu exists in a mixture of different coordination states consisting of Cu bound to sugars and small organic acids with some possible precipitated copper oxide. From the EXAFS studies, the coordination of Cu was determined to have four equatorial oxygen(nitrogen) ligands at 1.96 Å and two axial oxygen ligands at 2.31 Å. Scanning-electron microscopy studies revealed the distribution of Cu within the seedlings tissues, predominantly accumulated in the cortical and vascular (xylem) regions of root tissues. In the stem, most of the Cu was found within the xylem tissue. However, the deposition of Cu within the leaf tissues was in the parenchyma. The present study demonstrates the mechanisms employed by S. drummondii for Cu uptake and its biotransformation.     

Methods Currently Used in Testing Microbiological Degradation and Deterioration of a Wide Range of Polymeric Materials with Various Degree of Degradability: A Review

Biodegradation of polymeric materials affect a wide range of industries, information on degradability can provide fundamental information facilitating design and life-time analysis of materials. Among the methods currently used in testing, traditional gravimetric and respirometric techniques are tailored to readily degradable polymeric materials mostly and polymer blends with biodegradable components, but they are not applicable to the new generation of engineering polymers which are relatively resistant to biodegradation. However, electrochemical impedance spectroscopy (EIS) has been tested for monitoring biodeterioration of high strength materials and the technique has very high sensitivity. A wide range of materials including electronic insulation polyimides, fiber-reinforced polymeric composites (FRPCs) and corrosion protective polyurethane coatings have been successfully measured under inoculation of degradative microorganisms using EIS. In addition, the mechanism of degradation of high strength polymers is mainly due to the presence of plasticizers in the polymer matrices. The information on various methods discussed in this review is intended to illustrate a suite of methods for those who are interested in testing biodeterioration of polymeric materials under different environmental conditions and in selecting appropriate techniques for specific applications.     

Analyses of incinerated ash of paper sludge: comparison with incinerated ash of municipal solid waste

Fourteen paper sludge samples were collected at seven representative pulp and paper mills in Japan, and were analyzed to obtain fundamental data on the reuse of paper sludge-incinerated ash as papermaking material. For comparison, incinerated ashes of municipal solid waste (MSW) were collected at MSW incineration plants in Tokyo, and analyzed by similar methods. Elementary and X-ray diffraction analyses revealed that the predominant elements in paper sludge samples are calcium, silicon, aluminum, and magnesium, which are derived from paper fillers, coating pigments, and coagulants used in papermaking and process effluent treatments. Similar results were also obtained for the MSW-incinerated ashes, indicating that major components in the collected MSW are paper-related materials. Incineration of paper sludge around 800°C is recommended in terms of high brightness of the incinerated ash, which has about 60% brightness. Calcium, silicon, and aluminum components in the paper sludge are fused or sintered by heating. Although paper-sludge-incinerated ashes have irregular shape and large particle size distributions, they may be used as papermaking materials after pulverization using a ball mill. The MSW-incinerated ashes have 5%–30% water-soluble fractions and low brightness, and thus incineration conditions must be changed to reuse the MSW-incinerated ash as a papermaking material.Part of this paper was presented at the 68th Research Conference of Japan Tappi, Tokyo, 2001     

A Sensitive Electrochemical Impedance Spectroscopy Method for Detection of Polyimide Degradation by Microorganisms

An electrochemical impedance spectroscopy (EIS) technique was evaluated for monitoring microbial degradation of electronic packaging polyimides. The microbial inoculum was a mixed culture of fungi isolated previously from deteriorated polyimides. The active fungal consortium comprised Aspergillus versicolor, Cladosporium cladosporioides, and a Chaetomium species. After inoculation, fungal growth on the polyimides resulted in distinctive EIS spectra indicative of polymer insulation failure, which directly related to polymer integrity. Degradation appeared to occur in a number of steps and two distinctive stages in the decline of film resistance were observed in the inoculated EIS cells within the 2 and 10 weeks after inoculation. The early stage of resistance decrease may be related to the ingress of water molecules and ionic species into the polymeric materials, whereas the second stage probably resulted from partial degradation of the polymers by fungal growth on the polymer film. The relationship between changes of impedance spectra and microbial degradation of the polymer was further supported by scanning electron microscopy (SEM) observations of fungi growing on the surface of the inoculated polyimides. Our data indicate that the EIS can be used in detection of early degradation of resistant polymers and polyimides that are susceptible to biodeterioration.