Investigation of methods for estimating hand bone dimensions using X-ray hand anthropometric data

This study examined two conversion methods, M1 and M2, to predict finger/phalange bone lengths based on finger/phalange surface lengths. Forty-one Korean college students (25 males and 16 females) were recruited and their finger/phalange surface lengths, bone lengths and grip strengths were measured using a vernier caliper, an X-ray generator and a double-handle force measurement system, respectively. M1 and M2 were defined as formulas able to estimate finger/phalange bone lengths based on one dimension (i.e., surface hand length) and four finger dimensions (surface finger lengths), respectively. As a result of conversion, the estimation errors by M1 presented mean 1.22?mm, which was smaller than those (1.29?mm) by M2. The bone lengths estimated by M1 (mean r?=?0.81) presented higher correlations with the measured bone lengths than those estimated by M2 (0.79). Thus, the M1 method was recommended in the present study, based on conversion simplicity and accuracy.     

A barrier to metal movement: Synchrotron study of iron plaque on roots of wetland plants

正A wetland with attractive plants hosting birds and other wildlife is an esthetically pleasing prospect that is gaining popularity as a way of stabilizing or remediating metalcontaminated soils and sediment(Weber and Gagnon,2014;     

DOAS监测排放烟气浓度时谱线漂移处理方法研究

差分吸收光谱法(DOAS)是利用气体在紫外可见光波段对光具有选择吸收的特性来测量气体浓度的一种方法。DOAS法连续监测系统的核心是软件部分,由于吸收谱线漂移现象的存在,光谱解析算法的改进对污染气体浓度的计算带来很大的影响。基于DOAS法研究监测排放烟气浓度时谱线漂移对浓度计算的影响,并提出将相关函数和相关系数结合参与浓度计算,实验的结果表明,可以有效地减小谱线漂移时浓度计算的误差。     

爆炸冲击对高阶煤微晶结构的影响特征*

为探究爆炸冲击荷载对煤微晶结构的影响,以河南赵固二矿山西组二1煤层高阶无烟煤为研究对象,利用炸药对煤样进行爆炸冲击试验,通过改变炸药量控制冲击荷载的大小,并对冲击过后的煤样进行X射线衍射测试,分析在不同强度冲击荷载作用下煤样微晶结构的变化规律。研究结果表明:煤样的峰值应变随着冲击荷载的增大而升高;与原煤相比,受冲击荷载之后煤样XRD图谱的002峰与100峰均变的更高且陡,衍射峰位置向θ值大的一侧偏移;与原煤样相比,受冲击荷载之后煤体的微晶结构参数发生规律性变化,面层间距（d002）表现出减小的趋势,单元堆砌度（Lc）、单元延展度（La）以及（La/Lc）表现出增大的趋势;微晶结构变化快慢也呈现一定的规律性,随着煤样受到冲击荷载的增大,面层间距呈现减小的趋势;单元堆砌度与单元延展度呈现增加的趋势,前期增加缓慢,后期增加迅速;受冲击煤样的微晶结构更加有序,从微观结构上解释了冲击载荷对煤微晶结构的影响。     

牛粪发酵沼液DOM与Fe (III)离子络合机制研究

采用荧光光谱、红外光谱、平行因子（PARAFAC）分析及二维相关光谱（2D-COS）分析来解释Fe （III）与牛粪发酵DOM的络合异质性及机制.结果表明,PAFAFAC能够识别6个荧光组分,包括类蛋白（C2）、类富里酸（C1）、类腐殖酸（C4、C5）、类蛋白与类富里酸和类腐殖酸结合的荧光组分（C3、C6）.2D-SYS-COS分析仅能识别类蛋白和类富里酸荧光物质,DOM中类蛋白荧光为主要的荧光组分.2D-COS分析表明,在334nm处的类富里酸荧光组分优先与Fe （III）离子发生络合作用,络合次序为334nm→306nm.DOM中能够优先与Fe （III）发生络合作用的为仲铵盐-NH₂基团,各官能团组分与Fe （III）发生络合作用次序为2265→2771→1528→1310→1805→1479cm^-1.双对数模型计算结果表明牛粪发酵沼液DOM能够与Fe （III）形成高化学稳定性的络合物,其络合常数在4.34~7.03之间,研究结果能够为沼液施用土壤金属离子的形态分布和迁移转化提供理论指导.     

碳化条件下混凝土中钢筋腐蚀pH阈值研究

目的 确定碳化条件下几种典型缓冲溶液及模拟混凝土孔隙液中钢筋的腐蚀pH阈值范围。方法 采用电化学阻抗谱法,对不同pH、不同配制方法的缓冲溶液及模拟混凝土孔隙液中的钢筋试片进行电化学测量,选用不同的等效电路进行拟合,对测量中钢筋试片发生的电化学过程进行简要阐述。结合阻抗谱测量结果、等效电路拟合结果及工作电极典型宏观形貌,判断钢筋试片腐蚀状态,给出不同溶液对应的钢筋腐蚀pH阈值范围。结果离子环境不同,各缓冲溶液及模拟混凝土孔隙液中钢筋腐蚀pH阈值均存在一定差异,位于9～10.5不等。结论 混凝土碳化引入的HCO₃~–和CO₃^2–对钢筋腐蚀有促进作用。混凝土孔隙液pH越低,钢筋腐蚀越容易发生。因此,仅根据pH判断混凝土中钢筋腐蚀状态的方法并不可靠。     

活化粉煤灰的结构和组成研究

用化学分析、x光电子能谱、波谱、热谱和扫描电子显微镜等多种方法综合研究粉煤灰的体相和表面相的化学组成、颗粒形貌、表面价态、键型和表面相变过程等结构特征。发现粉煤灰的内部组成与表面组成明显不同;颗粒以微珠为主;粒度分布接近高斯分布;表面有Si－O－Si键,而无羟基;粉煤灰加热时有吸热和放热过程发生,并伴有失重现象。这些为粉煤灰的表面改性和综合利用提供了科学依据。     

Characterization of dissolved organic matter fractions from Lake Hongfeng, Southwestern China Plateau

With XAD-series and ion exchange resins, dissolved organic matter (DOM) from Lake Hongfeng in Southwestern China Plateau was isolated into 6 fractions, i.e., humic acid (HA), fulvic acid (FA), hydrophobic neutrals (HON), hydrophilic acids (HIA), hydrophilic bases (HIB) and hydrophilic neutrals (HIN). Those fractions were characterized by high performance size exclusion chromatography, fluorescence spectroscopy and UV absorbance. Among the 6 fractions, FA was predominant and accounted for 51% of the total DOM. The weight-average (M_w) and number-averaged (M_n) molecular weight of these fractions ranged from 1688 to 2355 Da and from 1338 to 1928 Da, respectively. A strong correlation was observed between specific UV absorbance at 280 nm, E₂/E₃ (absorbance at 250 nm to 365 nm), and the molecular weight for DOM fractions. UV-Vis fulvic-like fluorescence peaks were found in all fractions. Protein-like fluorescence peaks existed in HON may indicate that microbial activity was severely in Lake Hongfeng. There was a significant relationship between fluorescence intensities and specific UV absorbance at 254 nm for those DOM fractions, suggesting their similar luminescence characteristics. The values of fluorescence index (f_450/500) indicated that hydrophobic fractions may derive from terrestrial sources, and the hydrophilic fractions from microbial and terrestrial origins. Those results suggest that there were inter-relationships between molecular weight, fluorescence and absorbance characteristics, and also subtle consistencies between the hydrophilic and hydrophobic properties and the sources for these 6 fractions from Lake Hongfeng.     

环境微界面过程的原位和在线研究方法

环境微界面过程是污染物在各环境要素中迁移转化的基本过程,也是研究污染控制方法的基础.发展原位和在线研究方法,对于揭示污染物在环境微界面的迁移转化规律和进行污染控制过程的研究具有重要意义.本文基于环境微界面过程的基本特征,在针对多相环境催化的原位研究方法基础上,分析了用于环境微界面过程的原位和在线研究方法所面临的挑战和相应对策,主要介绍了红外光谱、拉曼光谱和质谱等技术在气固环境微界面过程原位研究中的应用,提出了发展环境微界面过程原位和在线研究方法体系的构想.     

砷在金属氧化物/水界面上的吸附机制Ⅰ.金属表面羟基的表征和作用

利用红外光谱对铁铈氧化物(Fe-Ce)吸附材料中的金属表面羟基(M-OH)进行了表征,并探讨了金属羟基在砷吸附中的作用.透射和原位温度漫反射-傅立叶变换红外光谱(FTIR)表征结果表明,Fe-Ce表面存在丰富的M-OH,但M-OH含量随制备温度升高而逐渐减少;Fe-Ce上的M-OH与一般金属氧化物的表面羟基特性存在显著不同,可能是一种特殊类型的结构性羟基.对砷吸附前后的Fe-Ce材料进行透射FTIR表征,发现砷饱和吸附后M-OH的摇摆振动消失,同时生成了新的As-O振动峰,表明M-OH在砷的去除中起着重要的作用;初始吸附pH由9.0降至5 0只引起了吸附剂上As-O键的伸缩振动向高频略微偏移;综合FTIR结果可以推测,M-OH和砷阴离子发生了直接的表面络合,在不同的pH条件下均与砷形成了内层络和物.