基于空气质量监测数据的钢铁行业污染源识别方法

京津冀及周边地区等重点区域已经建立具有高时空分辨率特点的空气质量监测网,但监测数据主要用于环境空气质量评价,在大气污染来源识别中应用较少.采用特征雷达图中的双重归一化算法对区域上2018～2019年秋冬季空气质量监测数据中的SO₂、 NO₂、 CO、 PM_2.5和粗颗粒物(PM₁₀与PM_2.5的浓度差值)这5种因子进行分析,识别出偏SO₂、偏NO₂、偏CO、偏PM_2.5、偏粗颗粒物、偏SO₂-CO、偏NO₂-CO和偏PM_2.5-CO这8种典型污染特征.以偏SO₂-CO特征为例,结合污染特征时空分布、主要污染源排放特征和PM_2.5源解析,判断该特征下对空气质量影响最突出的污染源,并将该方法用于一次典型污染过程的分析.结果表明,研究时段内偏SO₂-CO特征的平均占比为7.6%.（1）偏S...     

Molecular cytogenetic analysis of term placentae suspected of mosaicism using fluorescence in situ hybridization

In first-trimester chorionic villus sampling (CVS) for prenatal diagnosis, abnormal chromosomal findings, such as mosaicism, trisomies, or suspect abnormal karyotypes, are found more frequently than at amniocentesis. The fact that these chromosomal abnormalities do not always reflect the fetal karyotype but may be restricted to the placenta is a major problem in diagnosis and counselling. In this paper we present the results of fluorescence in situ hybridization (FISH) studies on interphase nuclei of three term placentae investigated because of false-positive findings at first-trimester CVS. The chorionic villi of the first case showed a mosaic chromosome pattern involving a trisomy 10 cell line and a normal cell line, those of the second case a total trisomy 8 cell line, while in the third case a complete monosomy X was found. Follow-up amniocentesis in each of these three cases revealed a normal karyotype. By using FISH, we were able to confirm the presence of the aberrant cell lines, which were all confined to one part of the placenta. FISH on interphase nuclei allows the investigation of large numbers of cells for the existence of numerical chromosome aberrations in a quick and reliable way.     

Prenatal application of fluorescent in situ hybridization (FISH) for identification of a mosaic Y-chromosome marker,IDIC(Yp)

An amniocentesis was performed at 13.3 weeks' gestation for advanced maternal age. A mosaic sex chromosome pattern was found: of 50 cells examined, 34 had a 45,X karyotype. In 14 cells with a modal number of 46, a recognizable Y was substituted by a small non-fluorescent marker. C-banding identified the marker as an isodicentric in 12 cells. In two cells, the non-fluorescent marker appeared to be monocentric and looked like a non-fluorescent del (Yq), but could have been an isodicentric Y with inactivation of one of the centromeres. Two cells with a modal number of 47 showed two copies of the monocentric marker. Fluorescent in situ hybridization with an alpha satellite Y-specific centromeric probe confirmed the Y-chromosome origin of the markers and allowed for more accurate prenatal diagnostic information.     

钢渣湿法脱硫试验研究

以某厂钢渣为吸收剂,以旋流板塔为吸收器,对湿法脱硫进行了试验研究。通过分析钢渣脱硫前后的化学成分变化,以及试验脱硫率随反应过程的变化,提出了钢渣湿法脱硫的反应机理。同时,试验研究了液气比、进气SO_2浓度、浆液浓度等主要参数对脱硫率的影响,以及加添加剂的效果。试验结果表明,通过合理的设计和适当的操作,可使钢渣湿法应用于中低脱硫率(50％～70％)的场合,以取得综合治理、以废治废的效果。     

AT－SS复合颗粒吸附剂的制备和除铅性能研究

通过颗粒吸附剂在含铅溶液中的振荡实验．研究了凹凸棒石粘土（ＡＴ）和钢渣（ＣＳ）、水泥（ＳＮ）、石英砂（ＳＳ）制得的多种复合颗粒吸附剂的除铅性能及制备条件．确定出最佳颗粒吸附剂为ＡＴ－ＳＳ，混合比为５：１，７００℃下焙烧１２０ｍｉｎ．对铅的静态吸附容量高达５００ｍｇ／ｇ以上，动态吸附容量为６０ｍｇ／ｇ．在１．５ｍｌ／ｍｉｎ的流速下，穿透时间为２０ｈ，洗脱回收率为４８．３％．当Ｐｂ进样量为２００ｍｇ／Ｌ时，ＡＴ－ＳＳ吸附剂在２３６倍床体积之内，流出液浓度低于排放标准．     

海洋大气环境下磷钒系耐候钢腐蚀数据分析

本文通过大气环境暴露试验,研究了在青岛海洋大气环境中暴露10年5周期的4种磷钒系耐候钢的腐蚀规律。结果表明,四种耐候钢的腐蚀速率的关系为:10CrPV10CuPV10MoPV08PV,耐侯钢的耐蚀性与添加元素类别和添加量相关。平均腐蚀深度数据拟合结果表明,A值大小顺序为:10CrPV10CuPV10 MoPV08PV,而n值的顺序是:10CuPV10CrPV10MoPV08PV。     

On the study of ecosystem health:state of the art

ＩｎｔｒｏｄｕｃｔｉｏｎＤｕｒｉｎｇｌａｓｔｄｅｃａｄｅｓ,ｔｈｅｔｅｒｍ“ｅｃｏｓｙｓｔｅｍｈｅａｌｔｈ”ｉｓｕｓｅｄｗｉｔｈｉｎｃｒｅａｓｉｎｇｆｒｅｑｕｅｎｃｙｉｎｔｈｅｌｉｔｅｒａｔｕｒｅ.Ｔｈｅｇｒｏｗｉｎｇｉｎｔｅｒｅｓｔｓｉｎｔｈｅｓｔｕ...     

Solid phase extraction of methomyl and thiodicarb from environmental water with an activated carbon cartridge and their determination by HPLC

ＩｎｔｒｏｄｕｃｔｉｏｎＢｏｔｈｍｅｔｈｏｍｙｌａｎｄｔｈｉｏｄｉｃａｒｂａｒｅＮｍｅｔｈｙｌｃａｒｂｍａｔｅｐｅｓｔｉｃｉｄｅｓ.Ｍｅｔｈｏｍｙｌｉｓｅｆｆｅｃｔｉｖｅｏｎａｗｉｄｅｒａｎｇｅｏｆｉｎｓｅｃｔｓａｓａｎｏｖｉｃｉｄｅ,ｌａｒｖｉｃｉｄ...     

Petro-chemical wastewater treatment by biological process

Ｉｎｔｈｅｃｏｕｒｓｅｏｆｏｉｌｒｅｆｉｎｉｎｇ,ｏｒｇａｎｉｃｗａｓｔｅｗａｔｅｒｗｉｔｈｈｉｇｈｃｏｎｃｅｎｔｒａｔｉｏｎｏｆｅｍｕｌｓｉｆｉｅｄｏｉｌａｎｄｐｈｅｎｏｌｉｓｐｒｏｄｕｃｅｄ,ｓｏｆａｒ,ｔｈｅｍｅｔｈｏｄｓｏｆｐｈｙｓｉｃｏｃｈｅ?..     

一种预测左半部成形极限图的简单方法

板材成形性能的评价一般基于成形极限图(FLD)。然而，无论是经由理论计算还是实验方法来获得成形极限图依然很困难而且很耗时。提出了一种预测深拉延部分成形极限图的新方法。假设对所有钢板来说其成形极限图的形状几乎都是一样的，而深拉延变形区域内其失效厚度应变也几乎一样，据此可利用体积不变原理推导出主应变和次应变之间的关系。结果表明，根据此方法计算的左半侧(拉深应变区)成形极限图与实验获得的FLD基本一致。