涡流热成像动态检测模式的缺陷信号重构方法研究

在涡流热成像检测中,缺陷信号重构可以有效评定结构的安全性和可靠性,及时预防生产中安全事故的发生,目前大多数信号重构方法都不适用于动态模式的涡流热成像检测。为了对动态模式涡流热成像检测的信号进行重构,提出了1种基于区域扫描的方法,选定区域大小及划分准则,在每帧图像相同位置划分区域,对各个区域内的温度数据进行相应的运算处理并提取结果,以此作为每个区域的重构温度,进而重构出包含所有缺陷温度信息的热像图。结果表明:该方法可以对动态模式下的涡流热成像温度信号进行重构,并能在一定程度上消除噪声,有利于后续的图像处理。     

一种压力容器封头非接触式扫描测量方法及误差分析

封头参数检测是确保封头质量,消除压力容器安全隐患的重要措施。传统接触式 的封头检测方法存在着诸多问题,为此,提出一种利用激光非接触式扫描进行封头参数 检测的方法。该方法利用支撑杆将激光扫描检测装置定位于封头端面,通过距离检测与 电机的旋转扫描,完成封头形状参数的检测。介绍该方法原理、操作过程,分析该方法 的误差。最后,对该方法进行实际测试验证。结果表明,该方法可以进行封头形状参数 的准确测量,误差同理论分析相符。     

以脱水污泥为接种污泥促进好氧污泥颗粒化

以脱水造粒形成的物理颗粒污泥为接种污泥,明显提高了好氧污泥颗粒化速度.研究结果表明：在第20d,接种物理颗粒污泥的R2中90%以上的污泥粒径即大于0.2mm,而接种絮状污泥的R1中只有26.7%.颗粒化过程中,接种物理颗粒污泥的R2中SVI始终小于80mL/g沉降性能良好,第25d时污泥浓度为6300mg/L,而R1为3200mg/L.脱水过程未对污泥活性造成明显影响,培养期间两者COD去除率均大于90%,但培养后期R2中TN的去除率约为70%,明显优于R1的55%,其主要原因为R2中的污泥粒径大于R1.经过5d的曝气剪切后仍有39.8%的物理颗粒污泥大于0.2mm,为颗粒化提供了大量诱导核,同时物理颗粒污泥内部营养传输孔道的形成与EPS的內源消化和反硝化产气有关.     

Selection of poly(R)-3-hydroxybutyric acid utilising bacteria by enrichment,optimisation and compatibility testing for consortia development

Bacterial strains with poly-3-hydroxybutyrate (PHB) degradation potential were isolated from waste yard soil samples of selected industrial sites in Uttarakhand, India, and two microbial consortia were developed, i.e. Consortium I comprises Pseudomonas sp. strain Rb10, Pseudomonas sp. strain Rb11 and Bacillus sp. strain Rb18, and Consortium II is composed of Lysinibacillus sp. strain Rb1, Pseudomonas sp. strain Rb13 and Pseudomonas sp. strain Rb19. The current study involved enrichment selection via liquid and semi-solid media, followed by isolation and screening of bacterial strains using PHB pellets and films. Furthermore, the identification and characterisation was done by triphasic approach. The utilisation of PHB by the characterised strains was confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy. Moreover, the minimum inhibitory concentration of solubilised PHB was found to be 2.5?mg/mL, which was detected through ‘clear zone assay’. Further, the selection and biocompatibility testing of potential isolates were performed for the formation of bacterial consortia. Thus, the present work would provide direct and standardised protocol for screening and selection of potential microbiomes for biodegradation of polymers by overcoming the negative effect of organic solvents. Moreover, indigenously developed consortia would be evaluated for their in situ biodegradation potential against various bioplastic films.     

Effects of UV-B radiation on the gills of Catla catla during early development

Scanning electron microscopic (SEM) study of gills of Catla catla catla (17-day-old) exposed to UV-B radiation (145?µW?cm^?2 at the water surface) for three different exposure times: 5, 10 and 15?min was conducted. Fish without UV-B exposure served as control. UV-B radiation damaged both gill filaments and lamellae. The intensity of damage was minimal in 5?min exposed fish, followed by 10?min exposed fish and maximal in 15?min. The gill epithelium was severely damaged in 15?min irradiated fish compared to control. Pavement cells (PVCs) were damaged and the numbers of microridges within PVCs decreased. The deep boundary of PVC was not clear. In some area of gill epithelium, PVCs were destroyed and mitochondrion-rich cells (MRCs) were exposed. The 5?min exposure reduced the number of microridges in the PVCs, but the boundary of PVCs was still visible. MRCs in the gill epithelium were not exposed in 5?min exposed fish. The damage to PVCs and subsequent exposure of MRCs in UV-B irradiated fish may hamper respiratory functions and disturb osmoregulation in catla.     

Chemical fractionation of metals in core sediments of Orogodo River,southern Nigeria

Sequential chemical extraction of metals (Cu, Ni, Mn, Fe, Pb, Cr, and Zn) from core sediments of the Orogodo River was carried out with a view of providing information on the phase distribution of these metals with respect to depths and seasons. The results indicate that copper was speciated into organic matter/sulfide, Fe–Mn oxides, and residual forms at 0–5?cm depth while at deeper sections copper was predominantly in the residual form. Nickel was speciated mainly into Fe–Mn oxides and residual forms. The average of lead in various particulate phases of the sediment are 0–100% for residual; 0–8% for carbonate; 0–16.2% for exchangeable; 0–10% for organic matter/sulfide form and 22–56% for Fe–Mn oxides bound metals. Manganese was speciated into exchangeable (10–36%) and Fe–Mn oxides bound (10–48%) at the surface layers of 0–20?cm depths and predominantly in the residual form in deeper sections implying partitioning into trioctahydral clay and/or well-defined crystalline oxides. Iron was predominantly in the Fe–Mn oxides and residual fractions, less than 8% in the organic fraction, and 24.4–37.3% in the exchangeable and carbonates fractions at the surface. The percentage contributions of iron in the exchangeable and carbonate fractions decreased to 3.2% at 55–60?cm depth. The amount of chromium in the exchangeable fraction ranged from 0% to 7% for exchangeable; 0–26.5% for organic matter/sulfide bound; 3.8–17.9% for Fe–Mn oxides; and 46.8–100% for residual fraction. The mobility factors of the metals indicated that these metals were relatively mobile at top sections as compared with deeper sections. The overall picture of metal mobility and availability indicates potential contamination risk by Fe, Zn, Mn, and Pb in the Orogodo River sediment system.     

唐山生态城市建设核心指标体系与评价

以我国东部沿海重工业城市—唐山市为例,通过分析其背景及发展特色,应用层次分析法结合专家评价法构建了一套唐山生态城市建设核心指标体系。体系主要包括4类1级指标、13类2级指标和49类3级指标,同时采用线性加权法计算得出唐山生态城市建设过程中不同发展阶段的生态化水平。结果表明,唐山市现阶段已经处于较高的生态化水平;2015年综合指数值可望处于Ⅰ级生态化水平,基本达到生态城市标准;且有望在2020—2030年建成中等发达国家水平的生态化城市。     

淮河盱眙段柱状沉积物中PAHs分布及生态风险评价

通过对淮河盱眙段柱状沉积物中16种优先控制的PAHs污染物进行GC-MS定量分析,结合210Pb同位素定年,重现了该区域多环芳烃的污染历史. 研究表明, 在柱状沉积物中整个沉积剖面(0～45 cm)w(PAHs)为102.9～306.9 　ng/g(以干质量计). 20世纪30年代以后w(PAHs)总体呈下降趋势,但自进入21世纪以来w(PAHs)呈逐年上升趋势,并在2008年达到最高值. 从柱状沉积物的w(2～3环PAHs)/w(4环PAHs)来看,淮河盱眙段沉积物中PAHs污染的历史来源主要是石油类污染. 对照有关沉积物的生态风险评价标准,表层与底层芴出现了负面生态效应,而其他层面的潜在生态风险很小.      

环境扫描电镜对废水生物样品形态结构的表征研究

采用环境扫描电镜(ESEM)分析颗粒污泥和悬浮填料生物膜的微生物群落形态,并与扫描电镜(SEM)观察结果进行比较.结果表明,ESEM观察悬浮填料生物膜的适宜条件为样品台温度5℃,样品室汽压5.91×102Pa,相对湿度75%,加速电压15.00kV.观察颗粒污泥样品的适宜条件为样品台温度0℃,样品室汽压7.00×102Pa,相对湿度100%,加速电压10.00kV.表面存在的水滴凝聚和含水量高、结构脆弱的样品易因气压和入射电子束轰击收缩变形,是影响ESEM观察样品真实面貌的主要因素.悬浮填料生物膜的ESEM观察说明,相较于SEM,未经任何处理的载体生物膜样品在合适的ESEM条件下可得到的高放大倍数的清晰照片,能更真实的表征生物膜的微生物群落结构.含水量高、结构脆弱,承受能力差的颗粒污泥样品,则需要通过锇酸或者戊二醛等固定剂进行化学固定,降低ESEM的加速电压,并且尽量缩短观察时间,避免因气压和高速入射电子束的轰击而收缩变形,获得其原始形貌照片.     

闽江干流沿岸土壤及河口沉积柱中有机氯农药分布特征

沿闽江干流沿岸采集19个表层土壤样品及1个河口沉积物柱样,采用气相色谱(GC-ECD)内标法分析其有机氯农药(OCPs)的含量,揭示了研究区土壤及河口沉积柱中有机氯农药的残留水平、分布及来源.结果表明,干流沿岸土壤中总的OCPs含量(干重)范围为4.31～877.80 ng·g-1,平均值为74.13 ng·g-1,且...