经济快速发展地区土地利用结构的时空演变——以苏锡常地区为例

利用1996～2007年苏锡常地区土地利用变更数据，从土地利用变化幅度、动态度、变化强度、相对变化率及景观生态学角度，对区域土地利用结构的动态变化及区域差异进行分析。研究结果表明：近十多年来，由于区域经济快速发展，工业用地扩展迅猛，城镇加速蔓延，从而导致区内耕地面积锐减，居民点及工矿用地、交通用地所占比例则逐年上升，交通用地的变化幅度及动态度最大；各用地类型的变化强度在此期间呈一定波动，除牧草地外，交通用地历年的变化强度之和最大，其次为园地、居民点及工矿用地、水利设施用地、耕地、其他农用地、林地、未利用地；区域土地利用结构逐渐向均衡状态发展，用地结构的均质性逐渐增强，地区土地利用结构渐趋稳定；各市耕地、居民点及工矿用地、其他农用地的变化幅度及相对变化率差别不大，而园地、林地、牧草地、交通用地、水利设施用地及未利用地的变化幅度及相对变化率区域差异较大，且三市园地、牧草地及未利用地的变化方向不一致。     

人为干扰对小兴安岭森林湿地土壤碳组分和酶活性的影响

以小兴安岭落叶林沼泽湿地为研究对象,对比研究皆伐地、火烧地和落叶松湿地土壤碳组分和酶活性.结果表明:(1)3种湿地类型土壤SOC含量表现为对照地显著高于皆伐地和火烧地(p0.05),在0~10 cm土层中皆伐地与对照地相比降低了58.38%,火烧地与对照地相比降低了61.96%.皆伐地与火烧地在不同土层的土壤中SOC含量差异不显著(p0.05);DOC含量对照地显著高于皆伐地和火烧地(p0.05).在0~10cm土层中火烧地DOC含量是皆伐地的1.99倍,两者差异不显著(p0.05);不同干扰方式对土壤MBC含量影响的差异主要表现在0~10 cm的土层土壤,对照地分别比皆伐地和火烧地高23.13%和95.79%(p0.05).在不同的土层中皆伐地MBC含量均大于火烧地,与SOC含量的变化趋势一致.(2)与对照地相比,皆伐地与火烧地0~10 cm土层的土壤蔗糖酶活性分别降低了45.59%和36.76%,脲酶活性显著降低了18.22%和55.69%(p0.05),蛋白酶活性降低了19.65%和17.34%,淀粉酶活性降低了6.29%和10.69%.土壤碳组分和酶活性在垂直方向上均表现为随着土层深度增加而减小.皆伐和火烧造成森林湿地土壤碳组分和酶活性降低.     

“U+L”型通风综采面合理挡风帘长度确定

合理长度的挡风帘可以有效减少工作面漏风量,避免瓦斯超限、爆炸等事故发生,保证工作面安全生产。模拟了有无挡风帘时和不同挡风帘长度时“U+L”型通风综采面采空区流场、瓦斯分布及上隅角等地瓦斯情况,验证了数学模型和参数的适用性,分析了挡风帘对采空区压力分布及瓦斯分布的影响,确定了“U+L”型通风综采面合理挡风帘长度。研究表明:挡风帘对采空区压力及瓦斯分布都有重要影响,挡风帘可以使采空区内特别是挡风帘遮挡区域采空区压力下降、瓦斯浓度升高; 随着挡风帘长度的增加,上隅角瓦斯浓度变化不大,采煤机机尾瓦斯浓度逐渐降低,滞后横川瓦斯浓度呈增大趋势;综合分析确定该采面合理挡风帘长度为120 m。     

Retrospective future proofing of a copper mine: Quantification of errors and omissions in ‘As-built’ documentation

The electrical instrumentation control systems (EICS) ‘As-built’ documentations of a copper mine were found to possess a significant errors and omissions, which hindered the asset owner’s ability to undertake effective and efficient operations and maintenance. A Systems Information Model (SIM) was used to retrospectively create a connected system to ensure all physical equipment and the associated connections that were constructed are modelled in an object-orientated database. In creating the SIM, the existing errors and omissions in the ‘As-built’ documentation were quantified, and cost savings that could be achieved for a future planned copper mine, with a similar design, were identified. The limitations of using conventional computer-aided-design (CAD) to design and document EICS are discussed. It is recommended that retrospectively creating a SIM can provide owners and operators with significant productivity benefits as well as ensure the asset’s integrity. The case study presented provides asset owners and operators with the empirical evidence to challenge conventional thinking surrounding the design, engineering and documentation of EICS using CAD and alternatively consider the use of SIM.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.     

应对环境风险的反身规制研究

面对当前日益严峻的环境风险和生态危机,环境领域的两大规制模式——命令控制规制模式和激励规制模式呈现规制失灵、治理不力的困境。从反身法理论来阐释,是由于这两种规制模式忽略了法律系统与其他社会子系统自身的独特运行逻辑,法律系统具有运行的封闭性与认知的开放性,有效的规制模式必须实现不同系统之间的结构耦合。反身规制是一种对自我规制的规制,其在承认法律自身规制局限性的基础上,培育其他子系统的反思结构,为提升当前环境治理绩效提供了一个新路径。实现对环境风险的反身规制,需要从信息披露、程序设计及商谈规范方面建构相应的法律制度。     

“十四五”时期生态环境重大制度政策创新的思考

用最严格的制度、最严密的法治保护生态环境,需要加快构建以治理体系和治理能力现代化为保障的生态文明制度体系。要增加制度供给,需从四个方面加快制度创新:一是发挥市场机制,健全多元体系;二是强化行政管理,落实地方责任;三是发挥社会机制,引导社会参与;四是强化法制建设,筑牢创新基础。     

Crystallization and X‐ray structure of 3,3’,4‐trichlorobiphenyl (PCB 35)∗

A method for the preparation of single crystals of PCB 35 suitable for single crystal X‐ray structure determination was developed. This method has already been proven suitable for 2,4'‐dichlorobiphenyl and may prove useful for other PCBs or related compounds. The crystals of PCB 35 are orthorhombic, spacegroup P2₁22₁ (a= 10.665(8), 6 = 3.825(3), c= 14.086(9) Å) and the structure was refined to R = 0.094 for 156 unique observed reflections and 43 parameters. Although the crystals were of poor quality, the structure determination unequivocally confirmed the substitution pattern of the biphenyl moiety by Cl atoms inferred previously from spectroscopic methods. The dihedral angle between the planes of the two phenyl rings is 33(2)°.     

The relationship of occupational injury and use of mental health care

Introduction: Symptoms of depression and anxiety are a common consequence of occupational injury regardless of its cause and type. Nevertheless, mental health care is rarely covered by workers’ compensation systems. The aim of this study was to assess the use of mental health care post-injury. Methods: We used a subsample of patient-care workers from the Boston Hospital Workers Health Study (BHWHS). We matched one injured worker with three uninjured workers during the period of 2012–2014 based on age and job title (nurse or patient-care associate) and looked at their mental health care use pre- and post-injury using medical claims data from the employer sponsored health plan. We used logistic regression analysis to assess the likelihood of mental health care use three and six months post-injury controlling for any pre-injury visits. Analyses were repeated separately by job title. Results: There were 556 injured workers between 2012 and 2014 that were matched with three uninjured workers at the time of injury (n = 1,649). Injured workers had a higher likelihood of seeking mental health care services than their uninjured counterparts during the six months after injury (OR = 1.646, 95% CI: 1.23–2.20), but not three months post-injury (OR = 0.825, 95% CI: 0.57–1.19). Patient-care associates had a higher likelihood to seek mental health care post-injury, than nurses (OR: 2.133 vs OR: 1.556) during the six months period. Conclusions: Injured workers have a higher likelihood to experience symptoms of depression and anxiety based on their use of mental health care post-injury and use is more predominant among patient-care associates; however, our sample has a small number of patient-care associates. Practical Applications: Treating depression and anxiety as part of the workers’ compensation system has the potential of preventing further physical ailment and improving the return to work process regardless of nature of injury.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.