Influence of moisture content,particle size and forming temperature on productivity and quality of rice straw pellets

A large amount of rice straw is generated and left as much in paddy fields, which causes greenhouse gas emissions as methane. Rice straw can be used as bioenergy. Rice straw pellets are a promising technology because pelletization of rice straw is a form of mass and energy densification, which leads to a product that is easy to handle, transport, store and utilize because of the increase in the bulk density. The operational conditions required to produce high quality rice straw pellets have not been determined. This study determined the optimal moisture content range required to produce rice straw pellets with high yield ratio and high heating value, and also determined the influence of particle size and the forming temperature on the yield ratio and durability of rice straw pellets. The optimal moisture content range was between 13% and 20% under a forming temperature of 60 or 80 °C. The optimal particle size was between 10 and 20 mm, considering the time and energy required for shredding, although the particle size did not significantly affect the yield ratio and durability of the pellets. The optimized conditions provided high quality rice straw pellets with nearly 90% yield ratio, ?12 MJ/kg for the lower heating value, and >95% durability.     

Protection of plants from ambient ozone by applications of ethylenediurea (EDU): A meta-analytic review

A meta-analysis was conducted to quantitatively assess the effects of ethylenediurea (EDU) on ozone (O₃) injury, growth, physiology and productivity of plants grown in ambient air conditions. Results indicated that EDU significantly reduced O₃-caused visible injury by 76%, and increased photosynthetic rate by 8%, above-ground biomass by 7% and crop yield by 15% in comparison with non-EDU treated plants, suggesting that ozone reduces growth and yield under current ambient conditions. EDU significantly ameliorated the biomass and yield of crops and grasses, but had no significant effect on tree growth with an exception of stem diameter. EDU applied as a soil drench at a concentration of 200-400 mg/L has the highest positive effect on crops grown in the field. Long-term research on full-grown tree species is needed. In conclusion, EDU is a powerful tool for assessing effects of ambient [O₃] on vegetation.     

Assessing the potential of yield improvements, through process scrap reduction, for energy and CO2 abatement in the steel and aluminium sectors

Targets to cut 2050 CO₂ emissions in the steel and aluminium sectors by 50%, whilst demand is expected to double, cannot be met by energy efficiency measures alone, so options that reduce total demand for liquid metal production must also be considered. Such reductions could occur through reduced demand for final goods (for instance by life extension), reduced demand for material use in each product (for instance by lightweight design) or reduced demand for material to make existing products. The last option, improving the yield of manufacturing processes from liquid metal to final product, is attractive in being invisible to the final customer, but has had little attention to date. Accordingly this paper aims to provide an estimate of the potential to make existing products with less liquid metal production.Yield ratios have been measured for five case study products, through a series of detailed factory visits, along each supply chain. The results of these studies, presented on graphs of cumulative energy against yield, demonstrate how the embodied energy in final products may be up to 15 times greater than the energy required to make liquid metal, due to yield losses. A top-down evaluation of the global flows of steel and aluminium showed that 26% of liquid steel and 41% of liquid aluminium produced does not make it into final products, but is diverted as process scrap and recycled. Reducing scrap substitutes production by recycling and could reduce total energy use by 17% and 6% and total CO₂ emissions by 16% and 7% for the steel and aluminium industries respectively, using forming and fabrication energy values from the case studies. The abatement potential of process scrap elimination is similar in magnitude to worldwide implementation of best available standards of energy efficiency and demonstrates how decreasing the recycled content may sometimes result in emission reductions.Evidence from the case studies suggests that whilst most companies are aware of their own yield ratios, few, if any, are fully aware of cumulative losses along their whole supply chain. Addressing yield losses requires this awareness to motivate collaborative approaches to improvement.     

粉末金属压制过程建摸方法(1)──金属塑性力学方法

介绍了建立描述粉末金属压制过程数学模型的难难点，详细论述了目前４种主要的建模方法，分析、比较了各种方法的优劣，并对建模工作提出了展望和指导性意见。     

Ozone risk for crops and pastures in present and future climates

Ozone is the most important regional-scale air pollutant causing risks for vegetation and human health in many parts of the world. Ozone impacts on yield and quality of crops and pastures depend on precursor emissions, atmospheric transport and leaf uptake and on the plant’s biochemical defence capacity, all of which are influenced by changing climatic conditions, increasing atmospheric CO₂ and altered emission patterns. In this article, recent findings about ozone effects under current conditions and trends in regional ozone levels and in climatic factors affecting the plant’s sensitivity to ozone are reviewed in order to assess implications of these developments for future regional ozone risks. Based on pessimistic IPCC emission scenarios for many cropland regions elevated mean ozone levels in surface air are projected for 2050 and beyond as a result of both increasing emissions and positive effects of climate change on ozone formation and higher cumulative ozone exposure during an extended growing season resulting from increasing length and frequency of ozone episodes. At the same time, crop sensitivity may decline in areas where warming is accompanied by drying, such as southern and central Europe, in contrast to areas at higher latitudes where rapid warming is projected to occur in the absence of declining air and soil moisture. In regions with rapid industrialisation and population growth and with little regulatory action, ozone risks are projected to increase most dramatically, thus causing negative impacts major staple crops such as rice and wheat and, consequently, on food security. Crop improvement may be a way to increase crop cross-tolerance to co-occurring stresses from heat, drought and ozone. However, the review reveals that besides uncertainties in climate projections, parameters in models for ozone risk assessment are also uncertain and model improvements are necessary to better define specific targets for crop improvements, to identify regions most at risk from ozone in a future climate and to set robust effect-based ozone standards.     

Estimating net primary production and annual plant carbon inputs, and modelling future changes in soil carbon stocks in arable farmlands of northern Japan

Soil C sequestration in croplands is deemed to be one of the most promising greenhouse gas mitigation options for Japan's agriculture. In this context, changes in soil C stocks in northern Japan's arable farming area over the period of 1971-2010, specifically in the region's typical Andosol (volcanic ash-derived) and non-Andosol soils, were simulated using soil-type-specific versions of the Rothamsted carbon model (RothC). The models were then used to predict the effects, over the period of 2011-2050, of three potential management scenarios: (i) baseline: maintenance of present crop residue returns and green manure crops, as well as composted cattle manure C inputs (24-34 Mg ha⁻¹ yr⁻¹ applied on 3-55% of arable land according to crop), (ii) cattle manure: all arable fields receive 20 Mg ha⁻¹ yr⁻¹ of composted cattle manure, increased C inputs from crop residues and present C inputs from green manure are assumed, and (iii) minimum input: all above-ground crop residues removed, no green manure crop, no cattle manure applied. Above- and below-ground residue biomass C inputs contributed by 8 major crops, and oats employed as a green manure crop, were drawn from yield statistics recorded at the township level and crop-specific allometric relationships (e.g. ratio of above-ground residue biomass to harvested biomass on a dry weight basis). Estimated crop net primary production (NPP) ranged from 1.60 Mg C ha⁻¹ yr⁻¹ for adzuki bean to 8.75 Mg C ha⁻¹ yr⁻¹ for silage corn. For the whole region (143 × 10³ ha), overall NPP was estimated at 952 ± 60 Gg C yr⁻¹ (6.66 ± 0.42 Mg C ha⁻¹ yr⁻¹). Plant C inputs to the soil also varied widely amongst the crops, ranging from 0.50 Mg C ha⁻¹ yr⁻¹ for potato to 3.26 Mg C ha⁻¹ yr⁻¹ for winter wheat. Annual plant C inputs to the soil were estimated at 360 ± 45 Gg C yr⁻¹ (2.52 ± 0.32 Mg C ha⁻¹ yr⁻¹), representing 38% of the cropland NPP. The RothC simulations suggest that the region's soil C stock (0-30 cm horizon), across all soils, has decreased from 13.96 Tg C (107.5 Mg C ha⁻¹ yr⁻¹) in 1970 to 12.46 Tg C (96.0 Mg C ha⁻¹ yr⁻¹) in 2010. For the baseline, cattle manure and minimum input scenarios, soil C stocks of 12.13, 13.27 and 9.82 Tg C, respectively, were projected for 2050. Over the period of 2011-2050, compared to the baseline scenario, soil C was sequestered (+0.219 Mg C ha⁻¹ yr⁻¹) by enhanced cattle manure application, but was lost (−0.445 Mg C ha⁻¹ yr⁻¹) under the minimum input scenario. The effect of variations of input data (monthly mean temperature, monthly precipitation, plant C inputs and cattle manure C inputs) on the uncertainty of model outputs for each scenario was assessed using a Monte Carlo approach. Taking into account the uncertainty (standard deviation as % of the mean) for the model's outputs for 2050 (5.1-6.1%), it is clear that the minimum input scenario would lead to a rapid decrease in soil C stocks for arable farmlands in northern Japan.     

The enhancement of photodegradation efficiency using Pt-TiO2 catalyst

The residues from the extraction of lead/zinc (Pb/Zn) ores of most Pb/Zn mines are permanently stored in tailings ponds, which require revegetation to reduce their environmental impact. This can only be done if the main constraints on plant establishment are evaluated. This can readily be done by field and greenhouse studies.

To test this, the properties of different tailings from Lechang Pb/Zn mine located at the north of Guangdong Province in southern China have been studied. Physical and chemical properties including concentrations of metals (Pb, Zn, Cd and Cu) in the tailings and soils collected from different sites have been measured. The results showed that tailings contain low nitrogen (0.016–0.075%), low-organic matter (0.58–1.78%), high salt (3.55–13.85 dS/m), and high total and diethylene–tetramine–pentaacetic acid (DTPA)-extractable metal concentrations (total: 1019–1642 μg g⁻¹ Pb, 3078–6773 μg g⁻¹ Zn, 8–23 μg g⁻¹ Cd, and 85–192 μg g⁻¹ Cu; DTPA-extractable: 59–178 μg g⁻¹ Pb, 21–200 μg g⁻¹ Zn, 0.30–1.5 μg g⁻¹ Cd, and 4.3–12 μg g⁻¹ Cu). Aqueous extracts of tailings/soils (10%, 20% and 30%, w/v) from different sites were prepared for testing their effects on seed germination and root elongation of a vegetable crop Brassica chinensis and a grass species Cynodon dactylon. It was found that root elongation provided a better evaluation of toxicity than seed germination. The ranking of toxicity using root elongation was: high-sulfur tailings>tailingdam>sparsely vegetated tailings>densely vegetated tailings>mountain soil for both plants. This order was consistent with DTPA-extractable Pb contents in the tailings and soils. B. chinensis seedlings were then grown in the mixtures of different proportions of tailings and farm soil for 4 weeks, and the results (dry weights of seedlings) were in line with the root elongation test. All these demonstrated that heavy metal toxicity, especially available Pb, low content of nutrient, and poor physical structure were major constraints on plant establishment and colonization on the Pb/Zn mine tailings.