Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

高铁扣件弹条疲劳断裂原因分析

通过对WJ-7型扣件中60Si2MnA弹条在拉伸-扭转试验过程发生断裂的原因进行分析和数值模拟研究,得出弹条断裂的原因.对60Si2MnA弹条承受的荷载进行分析可知,WJ-7型扣件在铁垫板与弹条后端接触区域内弯处应力集中最大,是造成弹条断裂破坏的主要原因之一,而弹条断裂的根本原因是弹条长期处于极限强度下工作,使弹条最终...     

中国旅游业CO_2排放区域差异的空间分析

在旅游业节能减排形势严峻的背景下,深入研究中国旅游业CO_2排放问题,制定科学的区域节能减排政策已刻不容缓。本文首先运用"自下而上"法,估算了1993-2012年中国整体旅游业、旅游业各分部门、大陆各省区(不含西藏)旅游业CO_2排放量。在此基础上,对全国及三大地带旅游业CO_2排放的总体特征进行分析;利用Theil指数法分析了中国旅游业CO_2排放强度的区域差异、区域内差异和区域间差异;运用AreView软件对中国旅游业CO_2排放强度的省际差异进行直观图示。分析结果显示:1993-2012年,中国旅游业CO_2排放量从1 480.868×10~4t升至6 274.129×10~4t;全国及三大地带旅游业CO_2排放强度整体上呈现出先显著下降、再缓慢梯度下降的趋势;中国旅游业CO_2排放强度空间分布不均匀,东部地区旅游业CO_2排放强度低于中部和西部地区;中国旅游业CO_2排放强度的区域总体差异、区域间差异和区域内差异整体呈逐渐缩小的趋势,区域间差异对总体差异的贡献率为94%-98%,区域间差异占主导地位;中国旅游业CO_2排放强度省际差异明显,属于旅游业CO_2排放强度弱显著区的省区基本位于东部沿海地区,河北、湖南、河南、广西、甘肃和新疆等省区频繁出现在旅游业CO_2排放强度强显著区之列,因此上述省区应是中国旅游业CO_2未来节能减排的区域重点。据此提出差别化的CO_2减排对策:东部地区应通过技术改进和调整产业结构、能源消费结构来降低CO_2排放强度,并以此带动中部和西部地区旅游业节能减排;中部和西部地区应加强与东部地区合作,将提高能源使用率、降低CO_2排放强度作为旅游业减排工作的重点。     

双水相气浮浮选光度法处理环境水样中痕量土霉素残留物

建立了一种新型分离方法--双水相气浮浮选光度法,使其处理环境水样中痕量土霉紊(OTC)残留物,研究了其工作原理,并用高效液相色谱法对该方法的可靠性进行了验证.利用自制的双水相气浮浮选装置,选择四氢呋喃作亲水有机溶剂、质量分数为10%的NaCl溶液作分相剂,NaOH溶液调节pH,将Cu2+与OTC形成的疏水配合物浮选至有机相,实现OTC与水样分离.浮选完毕后,经紫外-可见分光光度法分析,线性回归方程为A=1.532×105c+0.1230(其中:A为有机相的吸光度;c为水样的OTC摩尔浓度,mol/L),相关系数为0.9998,该方法的线性范围为4.8×10-7～7.3×10-5 mol/L,OTC加标回收率为99.5%～100.1%.     

氨水土壤混合物脱除CO2温室气体的实验研究

为了脱除CO2温室气体,提出了利用氨水土壤混合物去除CO2的新方法。分别考察了土壤颗粒粒径、CO2初始流量、氨水浓度（质量比）和温度对CO2脱除量和脱除率的影响。实验结果表明,该方法去除CO2的量较土壤物理吸附量和氨水化学吸收量的总和提高了大约15%;随着氨水浓度的增大,CO2的脱除率和脱除量都增大;随着土壤颗粒粒径和CO2初始流量的增大,CO2的脱除率和脱除量都减小;当温度由22℃升高到31℃,CO2的脱除率随着温度的升高而增大,但是继续升高温度到40℃,CO2的脱除率反而下降。     

负载型TiO2薄膜光催化剂降解亚甲基蓝

采用溶胶-凝胶法制备了玻璃负载的TiO2薄膜光催化剂,研究了该催化剂对亚甲基蓝溶液的光催化降解,考察了反应时间、水样的初始浓度、溶液的pH等对光催化降解效果的影响。     

Influence of titanium dioxide nanoparticles on speciation and bioavailability of arsenite

In this study, the influence of the co-existence of TiO₂ nanoparticles on the speciation of arsenite [As(III)] was studied by observing its adsorption and valence changing. Moreover, the influence of TiO₂ nanoparticles on the bioavailability of As(III) was examined by bioaccumulation test using carp (Cyprinus carpio). The results showed that TiO₂ nanoparticles have a significant adsorption capacity for As (III). Equilibrium was established within 30 min, with about 30% of the initial As (III) being adsorbed onto TiO₂ nanoparticles. Most of aqueous As (III) was oxidized to As(V) in the presence of TiO₂ nanoparticles under sunlight. The carp accumulated considerably more As in the presence of TiO₂ nanoparticles than in the absence of TiO₂ nanoparticles, and after 25-day exposure, As concentration in carp increased by 44%. Accumulation of As in viscera, gills and muscle of the carp was significantly enhanced by the presence of TiO₂ nanoparticles.     

针铁矿对Pb~(2+)的吸附特征及影响因素研究

通过恒温振荡平衡法研究了Pb~(2+)在针铁矿上的等温吸附和吸附动力学特征,探讨了吸附的影响因素.结果表明:(1)随Pb~(2+)平衡浓度和pH的增大,针铁矿对Pb~(2+)的吸附量逐渐增大.(2)针铁矿对Pb~(2+)的等温吸附可用Freundlich和Langmuir方程较好地拟合.(3)在相同温度和pH下,随离子强度的提高,针铁矿对Pb~(2+)的吸附量增大.(4)在相同离子强度和pH下,针铁矿对Pb~(2+)的吸附量总体随温度升高而增大.针铁矿对Pb~(2+)的吸附是自发进行的吸热反应.(5)针铁矿吸附Pb~(2+)的过程可分为初始的快吸附和随后的慢吸附2个阶段.pH影响吸附反应快慢,随pH增大吸附速率增大;随着pH的增大,达到平衡吸附的时间缩短.吸附动力学方程用Elovich方程拟合最佳.     

CaO/SiO2对流化床焚烧飞灰熔融过程中重金属挥发的影响

对掺煤混烧的流化床焚烧飞灰熔融过程中重金属在气相(吸收率)中和固相(固定率)中的分布进行了研究,并采用HNO3-NaOH2级吸收方式对气相重金属进行了吸收.结果表明,CaO/SiO2(摩尔比)对重金属的迁移行为有重要影响,CaO/SiO2降低,Cd、Pb固定率总体呈上升趋势;2级吸收对气相重金属的吸收有限,大部分重金属主要溶解在HNO3吸收液中,但NaOH吸收液对Cr的吸收效果好于HNO3吸收液;氯对重金属的挥发有重要影响,当重金属以氯化物形式存在时,其挥发受到SiO2的限制.随着SiO2含量增加,挥发率降低.     

不同高级氧化法对水中低浓度药物甲硝唑降解过程的比较

采用UV、H₂O₂、UV/H₂O₂、Fenton、UV/Fenton和UV/TiO₂方法,对水中低浓度的药物甲硝唑进行降解。通过HPLC和UV-Vis光谱得到的甲硝唑去除率。详细讨论了Fe²⁺、TiO₂和H₂O₂的初始浓度以及溶液的初始pH值对降解效率的影响。结果表明,UV/Fenton和UV/TiO₂ 2种系统对水中低浓度甲硝唑均有很好的去除效果,但前者的光催化效率更高。在甲硝唑浓度=6 μmol/L,H₂O₂和Fe²⁺的初始浓度分别为0.5 mg/L和2.94 μmol/L,pH=4的条件下,UV/Fenton方法对甲硝唑水溶液光催化的最佳效率为95.8%。