Brominated flame retardants and polychlorinated biphenyls in human breast milk from several locations in India: potential contaminant sources in a municipal dumping site

This study investigated the status of contamination of organohalogen compounds (OCs) such as polychlorinated biphenyls (PCBs) and brominated flame retardant (BFRs), including polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) in human milk samples from several locations in India. The levels of OCs were significantly higher in the milk of mothers living in and near municipal dumping site than other locations indicating that the open dumping sites for municipal wastes act as potential sources of these contaminants in India. The PCB concentrations observed in this study tended to decrease compared to those in the matched locations reported previously, probably due to the restriction of technical PCB usage in India. PBDE levels in human milk were two to three folds lower than those of PCBs in all the sampling locations investigated. Congener profiles of PCBs and PBDEs were different between samples from the dumping site mothers and general populations in other areas suggesting the presence of region-specific sources and pathways. HBCDs were detected in human milk from only two sites, with much lower concentrations and detection frequencies compared to PCBs and PBDEs. When hazard quotients (HQs) of PCBs and PBDEs were estimated for infant health risk, the HQs in some milk samples from the dumping site exceeded the threshold value (HQ > 1) of PCBs, indicating the potential risk for infants in the specific site.     

Occurrence of phenols in leachates from municipal solid waste landfill sites in Japan

The concentrations of 41 phenols in leachates from 38 municipal solid waste (MSW) landfill sites in Japan were measured. The main phenols detected in leachates were phenol, three cresols, 4-tert-butylphenol, 4-tertoctylphenol, 4-nonylphenol, bisphenol A, and some chlorophenols. The concentration levels of phenols were affected by the pH values of the leachates and the different types of landfill waste. The origins of phenol and p-cresol were considered to be incineration residues, and the major origin of 4-tert-butylphenol, bisphenol A, and 2,4,6-trichlorophenol was considered to be solidified fly ash. In contrast, the major origins of 4-tert-octylphenol and 4-nonylphenol were considered to be incombustibles. The discharge of leachates to the environment around MSW landfill sites without water treatment facilities can cause environmental pollution by phenols. In particular, the disposal of incineration residues including solidified fly ash and the codisposal of solidified fly ash and incombustibles might raise the possibility of environmental pollution. Moreover, the discharge of leachates at pH values of 9.8 or more could pollute the water environment with phenol. However, phenol, 4-nonylphenol, and bisphenol A can be removed to below the con centration levels that impact the environment around landfill sites by a series of conventional water treatment processes.     

Emission Inventory for an Industrial Area of India

The paper presents an emission inventory for Cochin, which is a highly industrialized area situated in the southern part of India. A proper emission inventory is very important for planning pollution control programmes, particularly in coastal sites like Cochin, where environmental situations are of growing concern owing to their typical meterorological conditions. In a systematic way the sources are broadly classified as point, line and area sources. The data on emissions from industries, fuel consumption for vehicular and domestic activities along with the respective emission factors are used for estimating the emissions. The study reveals that industrial sources are mainly responsible for emissions of particulate matter, oxides of sulphur and ammonia in the region. Automobiles are the prime sources of hydrocarbons, oxides of nitrogen and carbon monoxide emitting 95%, 77% and 70% respectively of their total emissions, while the contribution from domestic sources is not very significant.     

道路交通噪声自动监测应用探讨

结合城市道路路网状况及实际噪声监测数据和历史实验数据,对道路交通噪声自动监测数据的有效性、监测点位布设进行了研究,对道路交通噪声监测点位优化提出建议。     

风电机组与民爆危险品建筑物间安全防护距离的研究与选定

针对风电机组选址与民爆企业安全管理的突出矛盾,研究分析了风电机组和民爆危险品建筑物间安全距离设定的原则和方法,深入剖析了重大危险影响因素,并结合现行标准规范和国外相关规定及经验做法,估算了安全距离值,探讨了安全距离设定的可能性、合理性和适应性,提出了安全距离设定的建议和参照依据。     

Sorption and desorption kinetics of diuron,fluometuron, prometryn and pyrithiobac sodium in soils

Abstract

The sorption and desorption characteristics of four herbicides (diuron, fluometuron, prometryn and pyrithiobac‐sodium) in three different cotton growing soils of Australia was investigated. Kinetics and equilibrium sorption and desorption isotherms were determined using the batch equilibrium technique. Sorption was rapid (> 80% in 2 h) and sorption equilibrium was achieved within a short period of time (ca 4 h) for all herbicides. Sorption isotherms of the four herbicides were described by Freundlich equation with an r² value > 0.98. The herbicide sorption as measured by the distribution coefficient (K_d) values ranged from 3.24 to 5.71 L/kg for diuron, 0.44 to 1.13 L/kg for fluometuron, 1.78 to 6.04 L/kg for prometryn and 0.22 to 0.59 L/kg for pyrithiobac‐sodium. Sorption of herbicides was higher in the Moree soil than in Narrabri and Wee Waa soils. When the K_d values were normalised to organic carbon content of the soils (K_oC), it suggested that the affinity of the herbicides to the organic carbon increased in the order: pyrithiobac‐sodium < fluometuron < prometryn < diuron. The desorption isotherms were also adequately described by the Freundlich equation. For desorption, all herbicides exhibited hysteresis and the hysteresis was stronger for highly sorbed herbicides (diuron and prometryn) than the weakly sorbed herbicides (fluometuron and pyrithiobac‐sodium). Hysteresis was also quantified as the percentage of sorbed herbicides which is not released during the desorption step ω = [n_ad / n_de ‐1] x 100). Soil type and initial concentration had significant effect on ω. The effect of sorption and desorption properties of these four herbicides on the off‐site transport to contaminate surface and groundwater are also discussed in this paper.     

Hazardous waste site identification using aerial photography: A pilot study in Burlington County,New Jersey,USA

The objective of the project was to identify all hazardous waste sites in Burlington County, New Jersey that could be detected on existing, medium-scale aerial photographs of the county. The complete set of over 1000 black- and-white stereopairs at a scale of 1:12,000 was carefully examined for initial identification of possible sites. All suspicious sites were examined again on color transparencies of the county at the same 1:12,000 scale. Out of the 1094 black- and-white photos, 250 required further checking on color transparencies using a zoom stereoscope. This examination resulted in a final identification of 67 sites, the locations of which were delineated on 1:24,000 USGS maps. The use of air photo interpretation techniques provided an effective procedure for identifying waste sites quickly as well as providing a useful demonstration program for county and state officials.     

垃圾填埋二次污染的危害与防治

介绍了垃圾卫生填埋中二次污染的危害,指出垃圾卫生填埋场建设和填埋操作中为防止填埋释放物对周围环境的二次污染所应采取的防渗、收集、处理和利用等措施,探讨了在垃圾卫生填埋场建设和填埋操作中应注意的问题及应着重考虑的方面.     

INTEGRATED MODELING FOR WATERSHED MANAGEMENT: MULTIPLE OBJECTIVES AND SPATIAL EFFECTS1

ABSTRACT: This paper presents an optimization framework for prioritizing sites for wetlands restoration on a watershed or landscape scale. The framework is designed for analyzing the potential environmental impacts of alternative management strategies while accounting for economic constraints, thereby aiding decision makers in explicitly considering multiple management objectives. The modeling strategy consists of two phases. First, relationships between the configuration of land use types in a watershed and valued ecosystem services are specified mathematically. Second, those functions are incorporated into a spatial optimization model that allows comparisons of the expected environmental impacts and economic costs of management strategies that change the configuration of land use in the watershed. By way of a stylized example, this paper develops the general structure of the framework, presents simulation results based on two production functions for ecosystem services, and discusses the potential utility of the methodology for watershed management.