Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

压气机叶片用耐冲刷防腐有机涂层的制备及性能研究

目的 提高压气机叶片有机涂层的耐冲刷和防腐性能.方法 以氨基改性环氧树脂为粘接剂,通过加入高硬度Al2O3填料以及其他着色、防锈颜料,并充分分散,制备一种具有耐冲刷防腐功能的有机涂层.通过摆杆硬度测试、磨耗测试、冲刷测试、腐蚀测试及其他力学性能测试,对耐冲刷防腐有机涂层的综合性能进行评价,对比高硬度Al2O3填料含量对...     

云母钛珠光颜料的应用研究

介绍了一种不使用有机溶剂获得云母钛珠光颜料、水性金属效果云母钛珠光浆、珠光涂料的环保型制备工艺和性能.采用液相沉积法获得了不同厚度的纳米TiO2薄膜包覆层而显示银白、金、红、紫、蓝、绿等各种色彩的系列珠光云母颜料;应用珠光云母颜料与分散剂等水性助剂混合,获得了水性金属效果云母钛珠光浆的制备工艺;应用云母钛珠光浆与乳液配合,获得了云母钛珠光涂料的制备工艺.制备的云母钛珠光涂料系列多彩,白度高、反射率大、珠光效果好,硬度、附着力、耐候性等指标优异.     

Relationships between vitamin A and PCBs in grey seal mothers and pups during lactation

A previous study has shown a simultaneous increase of vitamin A and PCBs in grey seal (Halichoerus grypus) milk at late lactation (Debier et al., 2004). Here we sought to understand this unexpected relationship by comparing the dynamics of vitamin A and PCBs in the different tissue compartments of transfer. Lactating grey seals and their pups were sampled longitudinally in Scotland during the 2006 breeding season. As blubber reserves decreased, concentrations of vitamin A and PCBs increased during lactation in the inner layer of maternal blubber. A concomitant rise was observed in milk and consequently in the serum of suckling pups. The similar dynamics of vitamin A and PCBs in milk and inner blubber suggest a common mechanism of mobilisation from maternal body stores and transfer into the milk. A panel data analysis highlighted a negative impact of PCBs in milk and pup serum on vitamin A status in pup serum.     

盐酸掺杂聚苯胺粉体表面包覆合金镀层电磁参数研究

盐酸掺杂聚苯胺粉体作为电损耗吸波材料,存在磁损耗差的特点,吸波频带较窄。采用了化学镀的方法在盐酸掺杂聚苯胺粉体表面包覆磁性合金镀层,研究镀后粉体电磁参数的变化。实验结果表明,镀后粉体与原始粉体相比,磁性能有明显改善,但可能镀覆处理过程中粉体掺杂结构遭到破坏,镀后粉体电性能明显减弱。     

广东省家具行业基于涂料类型的VOCs排放特征及其环境影响

为掌握不同涂料类型废气之间的排放差异,基于溶剂型、水性、溶剂型辐射固化（ultra-violet,UV）、水性UV和粉末等不同涂料类型,选取典型家具制造企业进行废气采样,对比研究不同涂料类型废气挥发性有机物（volatile organic compounds,VOCs）排放浓度和组分差异,并对不同涂料类型废气的臭氧生成潜势（ozone formation potential,OFP）和二次有机气溶胶生成潜势（secondary organic aerosol formation potential,SOAFP）进行分析.结果表明,溶剂型涂料废气的总挥发性有机化合物（total volatile organic compound,TVOC）浓度、OFP和SOAFP均高于水性、溶剂型UV、水性UV和粉末涂料废气.不同涂料类型有组织废气VOCs浓度水平和组成差异较大.溶剂型涂料和溶剂型UV涂料废气以芳香烃和含氧挥发性有机物（oxygenated volatile organic compounds,OVOCs）为主,芳香烃的占比分别为41.91%~60.67%和42.51%~43.00%,OVOCs的占比分别为24.75%~41.29%和41.34%~43.21%.水性涂料、水性UV涂料和粉末涂料废气中VOCs占比最高的是OVOCs,占比分别为54.02%~62.10%、55.23%~64.81%和42.98%~46.45%.溶剂型涂料废气的主要组分为苯乙烯（14.68%）,水性涂料废气的主要组分为甲缩醛（14.61%）,溶剂型UV涂料和水性UV涂料废气的主要组分均为乙酸丁酯（15.36%和20.56%）,粉末涂料废气的主要组分是3-乙氧基丙酸乙酯（20.19%）.芳香烃对溶剂型涂料和溶剂型UV涂料废气的OFP贡献最大,分别为79.84%和80.32%.水性涂料和水性UV涂料废气OFP的主要贡献者是芳香烃（51.48%和36.71%）和OVOCs（42.30%和41.03%）.芳香烃（43.46%）、OVOCs（28.06%）和烯烃（25.24%）是粉末涂料OFP的主要贡献者.芳香烃是溶剂型涂料、水性涂料、溶剂型UV涂料、水性UV涂料和粉末涂料废气SOAFP的绝对贡献者,占比均超过99%.     

不同条件下进行渗后扩散的铝硅涂层氧化行为研究

目的提高铝硅涂层的抗氧化性能。方法采用料浆法在DZ417G定向凝固镍基高温合金叶片的燃气流道表面制备铝硅防护涂层,通过扫描电子显微镜(SEM)分析不同条件下进行渗后扩散的铝硅涂层表面显微组织形貌和截面显微组织形貌。结果无保护气氛下进行渗后扩散处理的铝硅涂层,在扩散过程中就已经发生了氧化,氧化过程首先形成多孔非致密结构的θ-Al_2O_3相,随着氧化过程的进行,θ-Al_2O_3相逐渐转变成致密结构的α-Al_2O_3相,从而起到真正的抗氧化作用。结论铝硅涂层中的Al元素提前被消耗,对铝硅涂层的使用寿命存在一定影响,因而渗后扩散须保证在真空条件下或有保护气氛条件下进行,使叶片表面渗后的铝浓度达到一定的要求,从而在使用过程中可以生成致密结构的α-Al_2O_3相,起到抗氧化作用,提高叶片的使用寿命。     

涂层老化评级方法标准中的问题探讨

对新实施的GB/T 1766-2008标准中存在的问题进行了分析与评述,指出起泡等级的数值设置在装饰性涂层综合评级体系中不合理,标准对起泡的要求太低;同时保护性涂层综合评级中对起泡的危害也不够重视。在综合评级的低等级和高等级评价中,对剥落与生锈的要求尺度不统一,低等级对小锈点比较宽容,高等级对大锈点的要求却较严格。标准在确定生锈、开裂、起泡等单项等级时要求不细,给单项等级评定造成困扰。另外,开裂、起泡单项等级的评定指标未量化,不利于提高数据准确性。     

基于SOM-SVM组合分类器的涂层防护性能研究

目的为避免EIS,EN技术可能出现的问题,建立一个准确、高效的评价模型,以探究现役军用有机涂层防护性能。方法利用电化学阻抗谱(EIS)、电化学噪声(EN)技术分析了两种军车有机涂层在循环暴露试验中的腐蚀行为,提取低频阻抗模值|Z|_(0.1 Hz)与涂层噪声电阻R_n两种电化学评价参数作为自组织神经网络(SOM)的输入训练样本,同时结合支持向量机(SVM)方法建立涂层防护性能组合分类器。结果将涂层失效过程自适应地分为涂层防护性能良好、防护性能下降、基本失效三个阶段。结论所建立的SOM-SVM组合分类器对于辅助分析涂层防护性能具有可行性。     

2024铝合金连接结构两种防护涂层耐蚀性研究

目的研究铝合金两种防护涂层在5%NaCl盐雾环境下的腐蚀疲劳性能。方法针对在两种涂层防护作用下的2024铝合金连接结构,开展实验室加速试验,采用"腐蚀环境-疲劳加载"交替循环的试验模式,得到铝合金两种防护涂层在5%NaCl盐雾环境下的腐蚀疲劳寿命值,对比分析涂层体系对铝合金连接结构的腐蚀疲劳寿命影响。结果 5%NaCl盐雾环境对于铝合金连接结构疲劳寿命有较大影响,相较于传统涂层,纳米涂层在5%NaCl盐雾环境下的防护效果更好。结论纳米涂层表面破坏后快速生成的致密氧化膜能有效提高涂层的耐蚀性能。