江苏省典型汽车涂装企业VOCs排放特征与污染控制技术

利用物料衡算和源排放测试对江苏省典型汽车涂装企业VOCs排放特征进行研究,并提出最佳治理技术。结果表明,大客车单位涂装面积VOCs排放量达到300 g/m2以上,小轿车为40~60 g/m2。苯系物是VOCs排放的重要组分,最高占比为33.2%~64.6%。乙酸丁酯、异丙醇、丁醇等醇酯类物质近年来广泛用于代替苯系物溶剂,其排放占比为29.6%~61.2%。汽车涂装行业最佳治理技术包括采用3C1B、水性免中涂等先进涂装工艺,用粉末涂料、水性涂料和高固体成分涂料等代替溶剂型涂料,从源头控制排放。采用干式漆雾分离技术、转轮浓缩吸附-蓄热式焚烧技术等先进尾气治理技术,VOCs去除率可达99%以上。     

Trends of perfluorochemicals in Greenland ringed seals and polar bears: Indications of shifts to decreasing trends

Time-series of perfluorinated alkylated substances (PFASs) in East Greenland polar bears and East and West Greenland ringed seals were updated in order to deduce whether a response to the major reduction in perfluoroalkyl production in the early 2000s had occurred. Previous studies had documented an exponential increase of perfluorooctane sulphonate (PFOS) in liver tissue from both species. In the present study, PFOS was still the far most dominant compound constituting 92% (West Greenland ringed seals), 88% (East Greenland ringed seals) and 85% (East Greenland polar bears). The PFOS concentrations increased up to 2006 with doubling times of approximately 6 years for the ringed seal populations and 14 years in case of polar bears. Since then a rapid decrease has occurred with clearing half-lives of approximately 1, 2 and 4 years, respectively. In polar bears perfluorohexane sulphonate (PFHxS) and perfluorooctane sulphonamide (PFOSA) also showed decreasing trends in recent years as do perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFUnA). For the West Greenland ringed seal population perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), PFDA and PFUnA peaked in the mid 2000s, whereas PFNA, PFDA and PFUnA in the East Greenland population have been stable or increasing in recent years. The peak of PFASs in Greenland ringed seals and polar bears occurred at a later time than in Canadian seals and polar bears and considerably later than observed in seal species from more southern latitudes. We suggest that this could be explained by the distance to emission hot-spots and differences in long-range transport to the Arctic.     

压气机叶片用耐冲刷防腐有机涂层的制备及性能研究

目的 提高压气机叶片有机涂层的耐冲刷和防腐性能.方法 以氨基改性环氧树脂为粘接剂,通过加入高硬度Al2O3填料以及其他着色、防锈颜料,并充分分散,制备一种具有耐冲刷防腐功能的有机涂层.通过摆杆硬度测试、磨耗测试、冲刷测试、腐蚀测试及其他力学性能测试,对耐冲刷防腐有机涂层的综合性能进行评价,对比高硬度Al2O3填料含量对...     

云母钛珠光颜料的应用研究

介绍了一种不使用有机溶剂获得云母钛珠光颜料、水性金属效果云母钛珠光浆、珠光涂料的环保型制备工艺和性能.采用液相沉积法获得了不同厚度的纳米TiO2薄膜包覆层而显示银白、金、红、紫、蓝、绿等各种色彩的系列珠光云母颜料;应用珠光云母颜料与分散剂等水性助剂混合,获得了水性金属效果云母钛珠光浆的制备工艺;应用云母钛珠光浆与乳液配合,获得了云母钛珠光涂料的制备工艺.制备的云母钛珠光涂料系列多彩,白度高、反射率大、珠光效果好,硬度、附着力、耐候性等指标优异.     

Relationships between vitamin A and PCBs in grey seal mothers and pups during lactation

A previous study has shown a simultaneous increase of vitamin A and PCBs in grey seal (Halichoerus grypus) milk at late lactation (Debier et al., 2004). Here we sought to understand this unexpected relationship by comparing the dynamics of vitamin A and PCBs in the different tissue compartments of transfer. Lactating grey seals and their pups were sampled longitudinally in Scotland during the 2006 breeding season. As blubber reserves decreased, concentrations of vitamin A and PCBs increased during lactation in the inner layer of maternal blubber. A concomitant rise was observed in milk and consequently in the serum of suckling pups. The similar dynamics of vitamin A and PCBs in milk and inner blubber suggest a common mechanism of mobilisation from maternal body stores and transfer into the milk. A panel data analysis highlighted a negative impact of PCBs in milk and pup serum on vitamin A status in pup serum.     

复合无机防火涂料优配研究

以市售无机膨胀型AB牌防火涂料为研究基础,复合了膨胀阻燃剂(APP-MEL-PER阻燃体系)、抑烟剂和助剂,进行了新型防火涂料的制备,当膨胀阻燃体系(APP-MEL-PER阻燃体系)以17∶6∶6的配比混合于该涂料中,其所占质量百分比为19%的时,防火性能最好。测试表明,该新型防火涂料烟密度等级6.77,指数下降了10,接近于国家标准1级。在248℃~400℃期间失重仅为12%,在390℃,有强烈的吸收峰,也表现了优异的阻燃性能。实现了APP-MEL-PER膨胀阻燃剂和AB牌涂料优配的目的。     

卷烟膨胀烟丝生产线冷端CO_2泵装置的优化改进

为解决干冰膨胀烟丝生产线冷端液体工艺泵因机械密封长期超压和气缚现象造成损坏发生CO2泄漏而导致紧急停机抢修的问题,对干冰膨胀线冷端工艺罐系统进行了优化改进。在工艺泵吸口前管路引一根气相平衡管至工艺罐顶部,当泵吸口前管路有CO2液体时,输送管路内气化的CO2气体通过气相平衡管线释放回工艺罐内,不会进入工艺泵体内。应用结果表明,工艺泵内的憋压和气缚现象消失了,机械密封受到保护。改造前机械密封平均一个季度更换一次,改造后机械密封使用5年未损毁,达到保护干冰膨胀线冷端工艺泵机械密封的目的。     

外浮顶罐充氮管网设计及有效性试验验证

为了预防外浮顶罐密封圈雷击火灾,提出在密封圈内充入氮气的保护方法.将安全含氧量作为充氮的惰化目标,对外浮顶罐充氮管网进行设计,并通过试验来验证充氮管网的有效性.试验得到了充氮流量、进出气孔数量及管径与有效充氮时间的关系.若以142 m3/h的流量对容量为10×104 m3的外浮顶罐密封圈内充氮,则46.5 min内可以达到充氮惰化目标.雷电预警时间为60 ～ 90 min的条件下,充氮时间小于预警时间,表明所设计的管网是有效的.     

人工湿地常用生物陶粒基质LDHs覆膜改性及其除磷效果研究

分别利用3种二价金属化合物和3种三价金属化合物,采用水热共沉淀法在碱性条件下对人工湿地中常用的生物陶粒基质进行层状双金属氢氧化物(LDHs)覆膜改性,并将9种不同类型的LDHs覆膜改性生物陶粒基质和普通生物陶粒基质分别填充于10个垂直流人工湿地模拟实验柱中,进行除磷净化实验.结果表明,9种不同类型的改性生物陶粒基质均能有效提高磷素的净化效果;Zn系LDHs改性生物陶粒对总磷、溶解性总磷、磷酸盐均有很好的处理效果,其中Zn Fe-LDHs、Zn Co-LDHs和Zn Al-LDHs对总磷的平均去除率均在92%以上,对溶解性总磷和磷酸盐的平均去除率均超过95%;其对磷素的净化机理主要集中于物理化学作用,同时还应与其对微生物生长的促进作用有关.     

电弧离子镀HY11涂层的1200℃高温氧化行为研究

目的研究真空电弧镀方法制备的超高温金属涂层HY11在1200℃下的高温氧化行为。方法用真空电弧镀技术(AIP)在单晶镍基高温合金DD6上制备超高温金属涂层HY11,采用HB 5258循环氧化方法进行1200℃循环氧化试验,通过试验过程中试样质量变化评价涂层氧化寿命。通过扫描电镜(SEM)分析氧化后的试样显微形貌,用X-射线衍射仪分析涂层材料的相结构,通过氧化速率对涂层材料抗氧化性能进行表征。结果采用单靶真空电弧镀技术制备的HY11涂层,经过1050℃真空条件下扩散2h,涂层厚度为50～60?m,扩散区厚度为10～15μm,涂层微观组织均匀致密,涂层合金界面清晰平整。DD6合金的1200℃循环氧化寿命仅仅为4 h,HY11涂层在1200℃的循环氧化寿命近300 h。沉积态涂层HY11相结构主要以Al_2O_3和Ni3Al为主。氧化后涂层材料表面形成的氧化膜以Al_2O_3为主。结论 HY11涂层在1200℃的循环氧化寿命为298 h,极大地提高了DD6合金在1200℃的循环氧化寿命。