冲击环境后峰锯齿脉冲试验条件自动寻优方法

目的 通过自动寻优制定冲击环境后峰锯齿脉冲试验条件,避免冲击“过试验”。方法 根据冲击响应谱的基本原理和谱型特征,提出利用对数距离量化评价2条谱型的吻合度。对冲击环境和后峰锯齿脉冲分别进行冲击响应谱分析,将2条冲击响应谱之间的对数距离最小作为优化目标,将后峰锯齿脉冲的波形参数作为优化参数,基于自适应差分进化算法,提出冲击环境后峰锯齿脉冲试验条件自动寻优方法。结果 将所提方法分别应用于模拟冲击环境和实测冲击环境,均获得了合理的后峰锯齿脉冲试验条件,验证了所提方法的正确性。结论 提出的基于自适应差分进化算法的冲击环境后峰锯齿脉冲试验条件自动寻优方法正确可行。     

锌、镉复合污染对重金属蓄集植物黑麦草养分吸收及锌、镉积累的影响

采用根袋盆栽试验研究了锌、镉单一及复合污染对重金属蓄集植物黑麦草(Lolium perenne L．)生长、养分吸收及锌、镉积累的影响．结果表明,锌、镉单一及复合污染对黑麦草生物量存在不同程度的抑制作用．锌、镉单一及复合污染均明显降低了黑麦草植株N、P、K含量,以锌、镉复合污染对植株养分吸收的抑制作用最大．锌、镉污染共存下,黑麦草对锌、镉的吸收为协同效应．黑麦草吸收的锌、镉主要集中在地上部,以锌、镉复合污染植株对锌、镉的蓄集量最大,其地上部锌、镉含量分别达到3108．72、73．97 mg·kg-1．     

Optimization of carbon dioxide absorption in a continuous bubble column reactor using response surface methodology

Carbon dioxide absorption using amine based solvents is a well-known approach for carbon dioxide removal. Especially with the increasing concerns about greenhouse gas emissions, there is a need for an optimization approach capable of multifactor calibration and prediction of interactions. Since conventional methods based on empirical relations are not efficiently applicable, this study investigates use of Response Surface Methodology as a strong optimization tool. A bubble column reactor was used and the effect of solvent concentration (10.0, 20.0 and 30.0 vol%), flow rate (4.0, 5.0 and 6.0 L min⁻¹), diffuser pore size (0.5, 1.0 and 1.5 mm) and temperature (20.0, 25.0 and 30.0°C) on the absorption capacity and also overall mass transfer coefficient was evaluated. The optimization results for maintaining maximum capacity and overall mass transfer coefficient revealed that different optimization targets led to different tuned operational factors. Overall mass transfer coefficient decreased to 34.7 min⁻¹ when the maximum capacity was the desired target. High reaction rate along with the highest absorption capacity was set as desirable two factor target in this application. As a result, a third scenario was designed to maximize both mass transfer coefficient and absorption capacity simultaneously. The optimized condition was achieved when a gas flow rate of 5.9 L min⁻¹, MEA solution of 29.6 vol%, diffuser pore size of 0.5 mm and temperature of 20.6°C was adjusted. At this condition, mass transfer coefficient reached a maximum of 38.4 min⁻¹, with a forecasted achievable absorption capacity of 120.5 g CO₂ per kg MEA.     

高速动能弹撞击装甲结构引起的螺栓连接失效及部件过载损伤研究

目的 验证和揭示高速动能弹对装甲结构的损伤机理。方法 聚焦高速动能弹打击装甲目标时,弹道冲击造成的靶标结构连接失效及部件过载损伤这2种损伤效应,以典型螺栓连接为研究对象,采用高速球形弹丸撞击螺栓连接结构的小尺寸试验对数值模拟方法和材料模型参数进行校验。在此基础上,采用数值模拟和冲击响应谱分析方法对高速动能弹打击全尺寸坦克进行模拟分析,获得撞击过程螺栓连接失效特征、主要影响因素及坦克典型位置部件的冲击加速度曲线和冲击响应谱曲线。结果 在小尺寸试验中,动能输入为0.042MJ时,螺栓连接未发生失效;但25.6MJ动能输入全尺寸坦克时,螺栓发生断裂而使连接失效。数值模拟结果揭示了螺栓发生断裂的主要原因。结论 输入动能大小、连接螺栓直径、模拟设备部件质量和撞击位置为螺栓是否断裂的主要影响因素。坦克某些位置的冲击响应谱曲线高于军用标准给出的临界曲线的下限甚至上限,表明这些位置的部件因高过载损伤导致失效的概率较高。     

紫外吸收光谱法监测硫化氢浓度的实验研究

紫外吸收光谱法是利用不同气体在紫外波段对光具有选择吸收的特性来测量排放烟气中的气体成分和浓度。基于这种方法设计出一套能够实时、在线监测硫化氢的实验装置。在常温常压状态下,通过对测量的一次光谱进行分析,计算出硫化氢的标准吸收截面,选择合适的数据处理方法,减小浓度计算时的误差,可得出硫化氢的实时浓度值。     

Turbulent kinetic energy budgets in a model canopy: comparisons between LES and wind-tunnel experiments

A comparative study of turbulence in a wind-tunnel model canopy is performed, using Large eddy simulation (LES) and experimental data from PIV and hot-wire anemometry measurements. The model canopy is composed of thin cylindrical stalks. In the LES, these are represented using a plant-scale approach, while the scale-dependent Lagrangian dynamic model is used as subgrid-scale model. LES predictions of turbulence statistics and energy spectra are found to be in good agreement with the experimental data. Turbulent kinetic energy (TKE) budgets from the LES simulation are analyzed to provide more information absent in the measurements. Results confirm that sloshing motions at the low levels of the canopy are mainly driven by pressure fluctuations. A difference between the energy flux obtained from the energy spectrum and the SGS dissipation rate is observed, consistent with a spectral bypass mechanism in which the real spectral flux due to cascade is smaller than that implied by the energy-spectrum level, due to direct drain by the canopy.     

Structuring pelagic trophic networks from the biomass size spectra

The selection and establishment of the structure (number and compartments, aggregation criteria, and trophic links) of the food webs is a critical task in trophic modelling. The present work proposes a systematic method to structure trophic networks in pelagic food webs. The biomass-size spectrum (BSS) is a well-established approach to analyze the structure of pelagic communities, and the body size is especially related to the ecological role of the organisms in the pelagic environment. To structure food webs, this work uses detailed arrangements of the community in size classes with increasing widths (like Sheldon-type BSS) as first aggregation criteria, and BSS theory as a framework to integrate the available knowledge about feeding selectivity in order to obtain a method to identify the trophic links between compartments. Diet composition matrices were estimated through the combination of a probability of encounter for each food type and a specific probability of ingestion related to the food size selectivity and other food quality characteristics (e.g., morphology and nutritional quality). The feasibility of this approach has been illustrated through data of size-structured communities extracted from the literature including different planktonic predator guilds (nanoflagellates, cladoceran-dominated zooplankton and copepod-dominated zooplankton) in a high mountain lake (La Caldera, Spain), two subtropical wetland lakes (meso-oligotrophic Laguna Galarza and eutrophic Laguna Iberá, Argentina) and a marine microcosm (Alborán Sea, Mediterranean). The identification of “who eats whom” and “by how much” also allows for more accurate analyses of the trophic control in the BSS. Extensive analyses of the balance between top-down and bottom-up controls were developed for the feeding interactions of the study cases.     

Multifractal characteristics of cylindrical sludge drying

This paper analyzes dewatered sludge drying using the multifractal theory. The drying rates of cylindrical sludge with equal masses but different cross-sectional diameters was studied, from which multifractal parameters such as partition function and quality exponent were obtained. The parameters acquired were used to calculate the multifractal singularity spectrum and indicate the presence of multifractal characteristics. The smaller cross-sectional diameters of the sludge were found to be non-homogeneous, and required quantitative methods to analyze.     

烟气脱氮体系中络合吸收剂的氧化还原过程

在填料吸收塔中,考察NO和O₂共存时,NO浓度、O₂含量对脱氮效率、Fe^II(EDTA)氧化速率以及Fe^III(EDTA)生物还原速率的影响,并对该系统的主要反应过程进行了分析.结果表明,同时吸收NO可促进Fe^II(EDTA)的氧化,当进气NO浓度由0增至500cm³/m³时,表观氧化反应速率常数由0.00451min^-1增至0.00604min^-1;Fe^II(EDTA)的氧化反应对于O₂含量为1级反应,表观氧化速率常数与O₂含量成线性关系;增加气体中NO浓度或O₂含量均会使Fe^III(EDTA)的生物还原反应速率下降;微生物对氧化中间产物的还原可以减缓NO对Fe^II(EDTA)氧化的促进作用,因而气相中NO和O2共存时对Fe^III(EDTA)生物还原的影响小于各单一组分存在时的影响之和.     

污水生化处理出水吸收二氧化硫——烟道气脱硫与污水回用的新途径

利用污水生化处理过程中产生的碱度化学吸收二氧化硫,是烟道气脱硫和污水回用的新思路。生化处理出水具有水量大、碱度高的特点,对酸有较强的缓冲能力。试验证明,生化处理出水吸收二氧化硫的效果好,去除率可达95％以上。与海水脱硫方法相比,用水量少,且吸收液pH值高。借助生化反应可增加生化出水的碱度。分析表明：该方法具有二氧化硫去除率高,能耗低,运行费用省,投资少,勿需化学药剂,不产生二次污染的优点。