基于损伤等效的振动疲劳试验载荷转换

目的使用简谐激励替代随机平直谱激励进行振动疲劳试验。方法利用有限元仿真计算某典型铝合金试验件在简谐激励和随机平直谱激励下的疲劳寿命,分析2种工况下试验件寿命相等时激励的等效关系。进行一组定频激励试验和一组谱激励试验,对比试验结果,验证在某典型铝合金试验件上利用简谐激励替代随机平直谱激励进行振动疲劳试验的可行性。结果通过试验与仿真技术,对2024-T4铝合金试验件在一定频率非共振简谐激励和随机平直谱激励作用下的振动疲劳寿命规律进行研究,得出了不同激励作用下试验件寿命相同时载荷的等效关系。结论基于损伤等效,工程中可以使用简谐激励代替随机平直谱激励进行振动疲劳试验,从而解决了一类振动疲劳试验加载困难的问题,实现振动疲劳的试验加速。     

加速寿命试验与高加速寿命试验的比较分析

介绍了加速寿命试验、高加速寿命试验的基本概念、原理,从试验目的、试验方法、试验时间等方面对加速寿命试验和高加速寿命试验进行了比较,说明它们有不同的应用时机和范围.加速寿命试验、高加速寿命试验都是卓越的加速环境试验技术,也是可靠性试验领域的两个主要发展方向.     

Pressurized liquid extraction of six tetracyclines from agricultural soils

Veterinary antibiotics used in agriculture can be introduced into the environment through land application of animal manure, accumulating in soils and groundwaters and posing a significant risk to human health and animal well-being. As the analysis of tetracyclines in soil is challenging due to their strong interaction with soil minerals and organic carbon, the objective of this study was to develop a reliable and reproducible method for quantitative analysis of chlortetracycline and oxytetracycline, and their respective metabolites in soils. A method based on pressurized liquid extraction (PLE) with in-cell clean-up was developed for the extraction of chlortetracycline and oxytetracycline and four likely metabolites from a set of four soils. Optimized conditions included a cell size of 22?mL, soil loading of 5?g, pH of 8.0, methanol:water ratio of 3:1, 50?°C, and two cycles. Soil extracts were analysed by high-performance liquid chromatography (HPLC) coupled with ion trap mass spectrometry (MS). Recoveries of seven tetracyclines from soil ranged from 41% to 110%. The limits of detection for tetracyclines were 0.08–0.3 µg g^?1 soil, and intra- and inter-day variation ranged from 0.12–0.34%. The proposed PLE method is suitable for quantification of tetracyclines in agricultural soils at typical concentrations expected in contaminated environments.     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.     

被动加标在水生生态风险评价中的应用——以多氯联苯分配系数的测定为例

准确的水生生态风险评价需要可靠的毒性数据,而其获取要求在一定时间范围内,水体中污染物的浓度保持恒定。对疏水性有机污染物进行水体生物毒性测试时,通常采用有机溶剂加标,然而该方式可能因为污染物的挥发和降解、容器壁吸附、生物摄取等问题,水体中污染物浓度持续下降,导致污染物的浓度-效应关系难以明确。近期为了克服这些问题,被动加标用于替代溶剂加标,通过污染物在加标体系中平衡分配来维持精确和恒定的水体浓度,同时还可通过测定加标聚合物中污染物的浓度来监测水体浓度。首先介绍了被动加标方法及其材料选择,讨论了该方法在生态风险评价中的主要应用,包括分配系数的测定、体外细胞测试、体内生物积累及毒性测试,以及沉积物毒性评价等。然后,以测定代表污染物多氯联苯在聚二甲基硅氧烷与水间的分配系数为例,详细说明被动加标的操作流程。最后,讨论了被动加标方法的优缺点,并对其在水生生态风险中的应用前景进行了展望。     

基于功能仿真的电子产品性能退化分析方法

目的研究基于功能仿真对电子产品长期工作过程中性能退化问题进行分析的方法。方法以DC-DC电源模块为对象,一种方式是直接对电源模块进行加速退化试验,并基于试验数据进行可靠性分析;另一种方式是对电源模块中性能退化关键元器件进行加速退化试验,并将试验数据模型注入到电源模块功能仿真模型中,进行性能退化仿真与可靠性分析,最终对两种分析结果进行对比,验证仿真分析技术的有效性。结果对比显示,加速退化试验分析得到的电源模块平均寿命为281 560 h,仿真分析得到的电源模块平均寿命为357 290 h。结论由于仿真分析方法只考虑了性能退化的关键元器件,结果偏乐观,但是偏差在合理的范围内,证明该方法对于性能退化可靠性分析是有效的,并且应用该方法更便于进行设计改进和迭代分析。     

热电池失效分析及等效加速贮存试验技术

目的 建立基于实测环境载荷的热电池等效加速贮存试验技术,掌握其在环境载荷作用下的性能退化规律。方法 在分析热电池组成和所受环境载荷情况的基础上,分析热电池的主要失效模式,设计基于实测环境数据的等效加速贮存试验,开展热电池等效加速贮存试验,分析热电池性能和热图像的变化情况,利用粒子滤波算法对电池剩余电容量进行预测。结果 随加速循环次数（时间）的增加,热电池的电容量下降。热图像表明,热电池经过等效加速贮存试验后,其放电过程表面温度要高于初始放电表面温度。粒子滤波算法能够有效模拟电容量的退化过程,电池剩余电容量预测结果与试验结果误差在10%以内。结论 等效加速贮存试验得到了热电池的性能退化规律,从而为热电池的贮存试验提供一种解决方案。     

基于模态分析的某振动试验方法改进

目的对该试验夹具进行改进设计,使试验夹具首阶模态频率大于60 Hz。方法基于模态分析方法,分别采取改进夹具结构形式和改变夹具边界条件两种改进方式进行优化设计。结果根据模态分析结果发现,夹具结构形式改进对模态频率提高的效果不明显,改变边界条件能够显著提高夹具频率。改进后试验夹具首阶模态频率为69.5 Hz,大于试验输入载荷频率范围。结论试验夹具的固有频率应避开振动试验输入载荷频率范围,避免对试验结果造成影响。     

某新型航空发动机压气机叶片服役环境适应性研究初探

目的 开展某新型航空发动机压气机叶片服役环境适应性研究,探究压气机叶片服役环境下的耐蚀性及腐蚀萌生周期.方法 采用电化学工作站,开展压气机材料典型环境下标准三电极电化学试验,获取腐蚀电流.结合机场环境谱与当量折算法,利用计算得到的当量折算系数,对机场环境谱进行当量折算,编制模拟该型发动机后续服役环境的仿真加速腐蚀试验环境谱.依据该环境谱,开展压气机叶片试件仿真加速腐蚀试验.结果 在模拟服役环境下的第8个当量腐蚀年限时,新型航空发动机压气机叶片开始出现局部点蚀.随着腐蚀年限的延长,腐蚀损伤程度逐渐加重.结论 在服役环境下,新型航空发动机压气机叶片具有良好的环境适应性,能够满足6～8 a首翻期内的环境适应性要求.     

Evaluation of mercury speciation and removal through air pollution control devices of a 190 MW boiler

Air pollution control devices (APCDs) are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction (SCR) and wet flue gas desulfurization (FGD) systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation a ect mercury removal e ciently at coal-fired utilities. The Ontario Hydro Method (OHM) recommended by the U.S. Environmental Protection Agency (EPA) was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor a ecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury (Hg2+) and more elemental mercury (Hg0) at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation e ciency reached 71.0%. Therefore, oxidized mercury removal e ciency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%–96.8% of oxidized mercury was controlled, but only 54.9%–68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal e ciency was 95.9%–98.0%, and there was a big di erence in the total mercury removal e ciencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08.