中日安全生产监管体系的比较分析

近年来,虽然我国安全生产形势出现了好转,但安全生产形势仍然严峻,不容乐观。本文在对中、日两国安全生产形势进行分析的基础上,对比分析了中、日两国的安全生产监督管理体系,并归纳总结了日本安全生产监督管理体系的借鉴之处,指出了我国安全生产监督管理体系中存在的问题,以为我国安全生产监督管理体系的不断完善和健康发展提供借鉴。     

生产安全事故责任认定定量化方法的探讨

当前,我国生产安全事故的责任认定是在事故调查组分析调查事故原因后,对事故责任者承担的责任进行定性的责任认定,受一定的主观因素影响。为了避免主观因素的影响,本文提出了一种责任认定定量化方法,该方法首先从安全管理、安全技术和职业健康卫生三方面建立了完善的事故影响因素集;然后在分析事故原因后采用专家打分法(德尔菲法)确定各影响因素的影响度,并计算出与事故相关的责任者的累加影响度,即责任大小;最后根据事故造成的人员伤亡和经济损失情况对事故责任者作出处理。此方法对生产安全事故责任认定更加公正客观。     

基于专利地图的我国金属表面无铬钝化清洁生产技术分析

本文以专利地图为分析工具,对我国金属表面无铬钝化清洁生产技术发展的时间、空间和内容进行了归纳分析,并通过研究我国金属表面无铬钝化清洁生产技术专利的发展现状,对其今后的发展趋势进行了预测。     

铜陵相思谷尾矿用于处理酸性矿山排水的实验研究

铜陵相思谷尾矿是夕卡岩型矿床尾矿的典型代表,以富含碳酸盐为特征.为了考察该尾矿砂在AMD淋滤作用下重金属的迁移行为及用于处理AMD的有效性,研究在自行设计的动态实验柱中填充尾矿砂,在保持进水理化性质不变的条件下对其进行80 d的连续淋滤实验,实验过程中定期检测出水的成分,实验结束后对尾矿砂中元素赋存特征进行分析.结果表明,实验过程中出水pH值始终维持在7.5以上;Cu、Zn、Fe离子浓度分别保持在0.1、0.4、1 mg.L-1以下;尾矿砂的渗透系数逐渐降低,由初始的0.23 cm.s-1降至实验结束时的0.10 cm.s-1;固体中元素赋存形态分析结果表明,进水Cu2+、Zn2+主要通过2种作用被固定:Fe氢氧化物的吸持和自身沉淀(形成碳酸盐).研究发现铜陵相思谷尾矿具有较强的酸中和潜力,在中和过程中不仅不会产生重金属离子的淋滤迁移,相反会对其产生沉淀和吸附,因此,可以考虑将该尾矿作为AMD处理的有用材料进行废物利用.     

绿色阻垢剂聚天冬氨酸的液相优化制备

在分析国外多种合成聚天冬氨酸(PASP)的方法的基础上,采用马来酸酐与氨水进行溶液聚合的方法制备聚天冬氨酸,并对产物的阻垢率、黏均相对分子质量、生物降解性等性能指标进行了评价.采用静态阻垢法评价产物的阻垢率;采用极限黏度法测定聚琥珀酰亚氨的聚合度,然后计算PASP的黏均相对分子质量;采用摇床法通过对比降解前后的COD检测PASP的生物降解性能.同时,根据性能指标的变化分别对原料的物质的量配比、聚合温度和聚合时间进行了单一条件的筛选.经实验确定的合成PASP的最佳条件是:原料物质的量配比1∶1.1,聚合温度160℃,聚合时间1 h.在此条件下合成的PASP阻垢率超过95%,生物降解性能达到70%.     

气体脱硫胺液系统的清洁生产

分析了气体脱硫装置胺液系统污染物的主要来源和危害,通过采取清洁生产工艺、材质升级、在线净化复活、停工清扫塔器和新脱硫剂补充置换等措施,取得了较好的效果.     

荷电超滤膜对天然有机物去除及膜污染行为的影响

以Aldrich 腐殖酸溶液为水样,研究比较了溶液环境(pH值、离子强度和钙离子)对荷电改性再生纤维素超滤膜和传统中性未改性再生纤维素超滤膜过滤过程的影响.结果表明, ①pH值主要通过质子化作用影响荷电膜以及腐殖酸分子的荷电量,进而影响荷电超滤过程.溶液pH值从7.5下降到3.5时,荷电超滤膜对腐殖酸的截留率从92%减少到79%,超滤4 h时,膜通量下降从26%增加到36%.②离子强度的改变是通过影响腐殖酸分子的物化性质和静电屏蔽作用来影响超滤过程的.当溶液离子强度为0、 3和100 mmol/L时,初始截留率依次降低,分别为92%、 87%和48%,超滤4 h时,荷电超滤膜的通量下降依次增加,分别为26%、 35%和63%.③Ca2+浓度的影响,需要综合考虑静电屏蔽作用、Ca2+的架桥作用以及滤饼层的压实性等各方面的影响.④pH值、离子强度和钙离子对中性超滤膜过滤行为的影响趋势与荷电超滤膜相似,但其影响程度有着较大的差别.研究结果对荷电超滤膜技术在实际应用中选择合适环境条件提供了参考.     

春季黄渤海大气气溶胶的离子特征与来源分析

于2010年春季在黄海、渤海海域采集大气气溶胶总悬浮颗粒物（TSP）样品,并运用离子色谱法对其中主要的水溶性阴离子（Cl-、NO3-、SO24-、CH3SO3-（MSA））和阳离子（Na＋、K＋、NH4＋、Mg2＋、Ca2＋）浓度进行了测定.分析结果显示,黄海、渤海气溶胶样品中主要水溶性离子总浓度分别为10.2～47....     

Assessment of eco-labelling criteria development from a strategic sustainability perspective

To turn current patterns of consumption and production in a sustainable direction, solid and understandable market information on the socio-ecological performance of products is needed. Eco-labelling programmes have an important role in this communication. The aim of this study is to investigate what gaps there may be in the current criteria development processes in relation to a strategic sustainability perspective and develop recommendations on how such presumptive gaps could be bridged. First a previously published generic framework for strategic sustainable development is described and applied for the assessment of two eco-labelling programmes. Data for the assessment is collected from literature and in semi-structured interviews and discussions with eco-labelling experts.The assessment revealed that the programmes lack both an operational definition of sustainability, and a statement of objectives to direct and drive the criteria development processes. Consequently they also lack guidelines for how product category criteria might gradually develop in any direction. The selected criteria mainly reflect the current reality based on a selection of negative impacts in ecosystems, but how this selection, or prioritization, is made is not clearly presented. Finally, there are no guidelines to ensure that the criteria developers represent a broad enough competence to embrace all essential sustainability aspects.In conclusion the results point at deficiencies in theory, process and practice of eco-labelling, which hampers cohesiveness, transparency and comprehension. And it hampers predictability, as producers get no support in foreseeing how coming revisions of criteria will develop. This represents a lost opportunity for strategic sustainable development. It is suggested that these problems could be avoided by informing the criteria development process by a framework for strategic sustainable development, based on backcasting from basic sustainability principles.     

LCA of eucalyptus wood charcoal briquettes

This paper sets out to describe the environmental impact assessment for wood charcoal briquettes produced from eucalyptus wood in Brazil, with specific reference to those impacts associated with Global Warming Potential. To achieve that objective, the work was undertaken in accordance with ISO 14040 "Environmental management - Life cycle assessment - Principles and framework" which describes essential LCA characteristics and good practices. Charcoal briquettes are produced from two basic raw materials, charcoal fines and starch. The fines result from the production of charcoal from sustainably managed eucalyptus plantations. Starch is extracted from babaçu pulp in the Amazon region. Multi-output processes were allocated based on income from the different by-products. The results showed that more than 90% of incoming CO₂ was due to biomass production for charcoal, and the remainder to starch biomass production. Based on Brazilian data, as well as information provided by the GaBi4.3 database, it turned out that supplying the energy content of 1 kg of briquettes resulted in the sequestration of 3.9690 kg of CO₂, i.e. around 4 kg of CO₂ per kg of briquettes produced. CO₂ emissions throughout the briquette production process are totally compensated for by the environmental quality of the raw materials used.