复合混凝剂处理印染废水

为了处理高浓度、高色度、高COD的印染废水，利用硫酸亚铁、工业废酸和金属下脚料自行配制了复合混凝剂，并将其与聚合双酸铝铁、聚合氯化铝铁、硫酸亚铁对印染废水的混凝效果进行对比。研究表明，复合混凝剂处理印染废水具有成本低、效果好的特点。当硫酸亚铁的投加量为200mg/L，复合混凝剂的投加量为1280mg／L，PAM的用量为2mg／L时，脱色率达94．9％，COD去除率达78．1％，悬浮固体（SS）去除率达90．9％。     

海绵铁预处理DSD酸废水的研究

用铁泥废渣制备水处理材料海绵铁,研究含碳球团直接还原的金属化率与还原时间,温度和铁泥粒度之间的关系,得到含碳球团制备海绵铁的反应参数。并对海绵铁预处理DSD酸废水的各种影响因素进行了试验研究,确定最佳试验条件;通过试验对海绵铁处理DSD酸废水的机理进行了探讨,确定它是电化学作用、电场作用、絮凝沉淀以及物理吸附等共同作用的结果。试验表明,海绵铁可作为高浓度DSD废水的预处理材料。     

Adsorption selectivity of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents

Both bottle-point and column-feeding experiments involving different solutes and sorbents were carried out to investigate the adsorption selectivity and separation performance of salicylic acid and 5-sulfosalicylic acid. Their adsorption isotherms onto such hypercrosslinked polymeric adsorbents as NDA-100 and NDA-99 could be well described by the Freundlich equations whose characteristics describe extrathermic and favorable adsorption processes. The adsorption towards NDA-100 mainly depended on the π-π interaction, while that towards NDA-99 was extremely influenced by the static-electric interaction. Additionally, the adsorptive capacity of salicylic acid on NDA-99 decreased while it increased on NDA-100 with the presence of 5-sulfosalicylic acid in the adsorptive environment as the competitive component. Comparatively, the adsorption capacity of 5-sulfosalicylic acid decreased on both resins with salicylic acid as the competitive component. In fact, the difference in the interaction between adsorbent and adsorbate resulted in the straight antagonism on the effective adsorption sites on the adsorbent. In conclusion, the adsorption selectivity of salicylic acid onto NDA-100 was obviously larger than that onto NDA-99 with the existence of 5-sulfosalicylic acid in the adsorptive environment. A satisfactory separation and recovery of tested solutes in aqueous phase could be foreseeably achieved by the sequencing adsorption technique involving NDA-100 as well as NDA-99. Translated from Environmental Pollution & Control, 2005, 27(8): 570–574 [译自: 环境污染与防治]     

改性凹凸棒土对染料废水脱色初步实验

以凹凸棒土为原料,通过复配造粒、热处理的方法对凹凸棒土进行改性,并用改性后的凹凸棒土对染料废水进行处理。考察了pH值、凹凸棒土用量及吸附时间等因素的影响,探索了最佳工艺条件。结果表明,改性后的凹凸棒土吸附性能有了明显改善,对染料废水进行处理,脱色率可达99%以上,处理废水量与吸附剂比为670颐1,且其原料价廉易得、工艺简单、成本低,是一种较好的脱色吸附剂。     

多种染料的微生物脱色研究

从印染、毛纺等废水处理场的生物膜和活性污泥中分离到13株对36种染料有脱色能力的细菌。其中三株转化单胞菌D_(32),D_(33),D_4分别对29种染料有良好的脱色作用,其完整细胞对单一染料的脱色活力达2.6mg·g~(-1)(细胞湿重)·h~(-1)。对脱色反应的条件和机理进行了初探。     

切割钢渣活化过硫酸盐降解偶氮类染料酸性红73

切割钢渣是钢铁生产过程中的固体废弃物,如何有效处理和利用这些废渣具有减少环境污染、实现废物资源化的重要意义.本文选择河北邢台钢铁厂中切割钢渣为过硫酸盐(PS)活化剂,活化过硫酸盐(PS)去除水相中偶氮染料酸性红73(AR73),实验表明,25 mg·L~(-1) AR73在15 min内,其降解率为99.9%,TOC矿化率达58.6%.同时考察了钢渣投入量、PS浓度、初始pH值等影响因素对AR73降解效率的影响:随着PS浓度、钢渣投入量的增加,AR73的降解速率也逐渐增加;在pH为3～9时,AR73均可被有效去除,酸性条件更有利于AR73的去除.活性自由基猝灭实验表明,酸性红73的降解是通过自由基和非自由基两种机制实现的,且钢渣可多次回收重复利用.钢渣活化PS技术,还可有效去除蒽醌类染料(活性蓝19),其去除率为99.9%,矿化率可达92.0%;同时该技术对某印染废水(COD_(Cr)=5625 mg·L~(-1))的去除率达49.9%.本文所构建的切割钢渣活化过硫酸盐(PS)技术可应用于偶氮印染废水的处理,实现"以废治废"的目标.     

Effects of simulated acid rain on cation release in soils of South China

This paper deals with the release of base cations and Al3+ at the treatment with simulated acid rain (SAR) in main soil types collected from South China. Results showed that the amounts of base cations increased obviously when the pH value of simulated acid rain was lower than 3.0 or 3.5. Compared with the leaching of K+ and Na+, the leaching of Ca2+ and Mg2+ was affected by the pH value of SAR. Only when the amounts of base cations leached from soils exceeded the cation exchange capacity, the pH value of leaching solutions decreased sharply and the amounts of released Al3+ increased. The H+ buffering mechanisms, which were affected notonly by the pH values of SAR, but also by the types and solid components of soils, were proposed for the main soils studied.     

纳米TiO2光催化脱色效果的影响研究

采用偶联剂法制备负载型纳米TiO2光催化剂，对染料废水进行脱色试验研究。结果发现，将废水pH值控制在10～11，通过曝气、添加H2O2、Fe^3 等措施能有效提高废水脱色效果，脱色率在95％以上。     

酸性矿山废水的处理研究

简要分析了酸性矿山废水的主要污染物及危害,叙述了几种主要的处理技术:中和法、硫化沉淀浮选法、微生物法和人工湿地,并介绍了它们的机理、特点及实验研究和工业应用情况,由此对我国的酸性矿山废水的治理技术进行了前景展望。     

两种奥氏体不锈钢酸性盐雾腐蚀行为研究

目的研究0Cr18Ni9(钝化)不锈钢与0Cr18Ni10Ti(钝化)不锈钢在酸性盐雾条件下的腐蚀行为,为发动机零件选材及防护措施的改进提供依据。方法按GJB150.11A—2009《军用装备环境试验方法盐雾试验》进行,调节溶液p H到3.5±0.5,以24 h喷雾润湿+24 h干燥为一个循环,分别开展2(96 h)、4(192 h)、5(240 h)个循环的酸性盐雾试验。采用目视、称量、X射线衍射(XRD)、扫描电子显微镜(SEM)及能谱仪(EDS)对盐雾腐蚀后试样进行观察及分析。结果 0Cr18Ni9(钝化)与0Cr18Ni10Ti(钝化)两种奥氏体不锈钢均发生了轻微的腐蚀,主要为局部腐蚀及均匀腐蚀。结论两种金属在酸性盐雾条件下耐蚀性良好,且可满足目前海军型发动机对材料耐酸性盐雾腐蚀的要求,0Cr18Ni9(钝化)略优于0Cr18Ni10Ti(钝化)。