含砷污泥的粉煤灰固化研究

硫酸废水处理系统的中和污泥属于有害废渣,其中As浸出率超标.采用固化的方法处理某冶炼厂硫酸废水中和污泥,发现以水泥∶粉煤灰∶污泥=1∶1∶2的配比固化后,固化块浸出液浓度达到国标规定(1.5 mg/L).研究表明,粉煤灰替代水泥50%可达到较好的固化效果,浸泡24 d后浸出浓度达到稳定值,pH值为7时浸出浓度最小,外加剂对固化有负影响,采用湿养护可获得更好的效果.     

预处理垃圾焚烧飞灰作为碱胶凝材料混合材的研究

试验分析了垃圾焚烧飞灰的主要化学成分及矿物组成,探讨了预处理垃圾焚烧飞灰作为碱胶凝材料混合材的可能性.研究表明,垃圾焚烧飞灰主要由黏土类矿物组成,飞灰直接作为混合材参与水化过程会产生明显膨胀现象,加入30%(质量分数)飞灰制成的矿渣/飞灰试块在成型1 d脱膜时膨胀率达到15.7%,标准养护28 d后无侧压抗压强度只有12.4 MPa.对飞灰进行热活化预处理,900℃条件下活化效果最佳,同样的飞灰掺量下,试块在标准养护28 d后无侧压抗压强度达到46.0 MPa,膨胀现象消失,且碱胶凝材料中重金属稳定性良好.     

城市垃圾焚烧飞灰中重金属的形态及酸浸出性研究

研究了城市垃圾焚烧飞灰中重金属形态在不同粒径上的分布,以及HNO3对飞灰中重金属的浸出性.结果表明:飞灰中重金属主要以残渣态存在,可交换离子态含量很少;易挥发性的重金属在较大粒径上有较高分布,亲石性重金属Cr和Ni的分布与粒径的相关性不大,在各粒径上的分布较均匀;飞灰中以碳酸盐结合态存在的重金属对酸不稳定,易被HNO3浸出,而残渣态部分对酸较稳定,不易被HNO3浸出.     

焚烧飞灰熔融过程重金属迁移特性中试研究

通过中试试验研究垃圾焚烧飞灰熔融过程重金属Cd、Pb、Zn、Cu、Cr和Ni的迁移特性,着重研究重金属在熔渣中的固化效果,考察了温度（1 290℃、1 320℃、1 360 ℃）、助熔剂（10 %的玻璃粉）、冷却方式（水冷、空冷）对重金属固定率的影响.结果表明,温度的提高使Pb、Zn、Cu、Cr和Ni的固定率都有一定的提高;加入10%的玻璃粉使各种重金属的固定率都有显著提高,只有Zn例外;对Zn、Cu、Cr和Ni,空气冷却方式下的重金属固定率比水冷方式下的高.     

Management of mine spoil for crop productivity with lignite fly ash and biological amendments

Long-term field trials using lignite fly ash (LFA) were carried out in rice crops during the period 1996-2000 at Mine I, Neyveli Lignite Corporation, Tamil Nadu. LFA, being alkaline and endowed with an excellent pozzolanic nature, silt loam texture, and plant nutrients, has the potential to improve the texture, fertility, and crop productivity of mine spoil. The rice crops were the first, third, fifth, and sixth crops in rotation. The other crops, such as green gram (second) and sun hemp (fourth), were grown as green manure. For experimental trials, LFA was applied at various dosages (0, 5, 10, 20, 50, 100, and 200 t/ha), with and without press mud (10 t/ha), before cultivation of the first crop. Repeat applications of LFA were made at the same dosages in treatments of up to 50 t/ha (with and without press mud) before cultivation of the third and fifth crops. Press mud, a lightweight organic waste product from the sugar industry, was used as an organic amendment and source of plant nutrients. Also, a recommended dosage of chemical fertilizer, along with gypsum, humic acid, and biofertilizer as supplementing agents, was applied in all the treatments, including control. With one-time and repeat applications of LFA, from 5 to 20 t/ha (with and without press mud), the crop yield (grain and straw) increased significantly (p < 0.05), in the range from 3.0 to 42.0% over the corresponding control. The maximum yield was obtained with repeat applications of 20 t/ha of LFA with press mud in the third crop. The press mud enhanced the yield in the range of 1.5-10.2% with various dosages of LFA. The optimum dosage of LFA was 20 t/ha for both one-time and repeat applications. Repeat applications of LFA at lower dosages of up to 20 t/ha were more effective in increasing the yield than the corresponding one-time applications of up to 20 t/ha and repeat applications at 50 t/ha. One-time and repeat applications of LFA of up to 20 t/ha (with and without press mud), apart from increasing the yield, evinced improvement in the texture and fertility of mine spoil and the nutrient content of crop produce. Furthermore, some increase in the content of trace and heavy metals and the level of gamma-emitters in the mine spoil and crop produce was observed, but well within the permissible limits. The residual effect of LFA on succeeding crops was also encouraging in terms of eco-friendliness. Beyond 20 t/ha of LFA, the crop yield decreased significantly (p < 0.05), as a result of the formation of hardpan in the mine spoil and possibly the higher concentration of soluble salts in the LFA. However, the adverse effects of soluble salts were annulled progressively during the cultivation of succeeding crops. A plausible mechanism for the improved fertility of mine spoil and the carryover or uptake of toxic trace and heavy metals and gamma-emitters in mine spoil and crop produce is also discussed.     

生活垃圾焚烧飞灰在饰面砖中资源化应用技术

分析了飞灰的性质,利用飞灰、红泥及缸砂研制饰面砖,研究了飞灰对饰面砖性能及微观结构的影响,并对其安全性进行了评价。结果表明:飞灰主要化学成分是CaO、SiO2、Al2O3,构成SiO2-Al22O3-金属氧化物体系,可用作饰面砖的原材料;当飞灰掺加量为20%时,饰面砖表现出良好的性能:抗压强度19·2MPa,吸水率7·2%,表观质量达到一等品要求;与飞灰相比,饰面砖中重金属浸出能力大大降低:As、Pb、Ni、Cr、Cu、Hg、Cd水平振荡浸出毒性未检测出,Zn的水平振荡浸出值下降到飞灰中的0·014倍,Hg、Cd有效浸出毒性未检测出,As、Pb、Ni、Cr、Cu、Zn的有效浸出毒性分别下降到飞灰中的0·056、0·001、0·067、0·058、0·056、0·029倍。     

粉煤灰合成沸石同步脱氨除磷特性的研究

利用粉煤灰合成沸石,研究其在同步去除氮、磷方面的特性.合成沸石对氨氮和磷酸盐的吸附净化均随时间增加而变化,但均在24h后基本达到平衡.随合成沸石投加量的增加,同步去除污水中氮磷的效果越好,但在投加量为8 g·L^-1以上时去除率的增加明显放慢.在pH为7～9时氨氮去除率最高(约60%),超过此pH范围时去除率降低.在pH 7～9范围磷去除率达最低(约为85%),超过此pH范围时去除率增加(最高达到近100%).合成沸石对氨氮的吸附为放热反应,对磷的吸附为吸热反应.不同阳离子饱和的合成沸石对氨氮的吸附顺序依次为:Al>Mg>Ca>Na>Fe,对磷的吸附顺序则为:Al>Fe>Ca>Mg>Na.合成沸石的氨氮吸附机理为阳离子交换作用,对磷的去除除化学沉淀作用外尚有吸附机制.     

高效喷淋泡沫脱硫技术及装置的应用

SO2是产生酸雨的主要气体,其主要来源于工业燃煤锅炉.以沈阳一家电厂为例,该厂选用新型高效的喷淋泡沫脱硫除尘器对锅炉排放的SO2进行治理.进入喷淋泡沫塔前的SO2平均浓度为2780 mg/m3,经脱硫后出塔平均浓度为289.3 mg/m3,去除率为89.6%.结果表明,这种有别于传统湿法的新型高效的喷淋泡沫脱硫技术及装置具有脱硫效率高、装置占地少、运行稳定、沉淀物易于回收利用等特点,对锅炉排放的SO2进行治理是非常有效的.     

粉煤灰沸石分子筛负载氧化铈催化剂的制备及其催化燃烧二氯甲烷性能

以发电厂粉煤灰为原料,采用碱融水热法合成了HZSM-5分子筛(FHZSM-5),用浸渍法负载10％(w)CeO2制备了CeO2/FHZSM-5催化剂,用于二氯甲烷的催化燃烧.盐酸浓度为2 mol/L及粉煤灰和NaOH的质量比为1:1.2时制备的FHZSM-5纯度最高,结晶度最好,用其制备的CeO2/FHZSM-5催化剂...     

煤与瓦斯突出过程中煤体层裂演化特征实验研究

为了探究煤与瓦斯突出过程中煤体层裂演化特征,利用自主研制的煤与瓦斯突出实验模拟系统,研究突出过程中煤体层裂结构特征、煤体裂隙厚度演化特征和煤体质点运动演化特征。研究结果表明：在轴向应力0.9 MPa、瓦斯压力0.4 MPa时,煤体层裂发展时间持续85 ms,煤体共计出现11处裂隙。层裂从煤体后方的弱构面出现并向前方发展,其位置大多集中于突出腔体中后部,煤体层裂形式均为纵向贯通,在第9处出现最大纵向断裂裂隙。煤体裂隙总厚度约为75.6 mm、单处裂隙平均厚度约为8.4 mm,二者均呈现随时间递增的趋势。层裂过程中煤体单处裂隙厚度并不都是沿程递增的,部分煤体中部裂隙厚度呈现先增大后减小的特征。煤体的运动表现为靠近突出口端的运动速度更快、运动距离也更长。研究结果可为揭示煤与瓦斯突出层裂机制提供参考。