改性SCAC催化臭氧氧化去除布洛芬效能与反应活性位点研究

采用不同的表面改性方法(去矿化处理、氧化改性、碱改性和还原改性)对污泥基活性炭(SCAC)进行处理,分别获得了表面金属含量低、碱位低、碱性官能团含量高及Lewis碱含量高的4种改性SCAC(SCAC-D、SCAC-S、SCAC-OH和SCAC-N),对比考察了改性前后SCAC催化臭氧氧化去除布洛芬(IBP)的效能,并探讨了SCAC催化臭氧氧化反应的主要活性位点。结果表明,5种SCAC催化活性顺序为:SCAC-N>SCAC-OH>SCAC>SCAC-S>SCAC-D;金属组分减少会直接影响SCAC的催化活性,碱位减少对其催化活性的影响相对较弱,说明SCAC表面较为丰富的金属组分是其催化臭氧氧化反应的主要活性位点;增加SCAC表面碱位(Lewis碱和碱性官能团),减少表面酸性官能团有助于提高其催化活性。     

大气压等离子体射流对水中铜绿微囊藻的灭活作用

以铜绿微囊藻为研究对象,将空气源大气压等离子体射流(APPJ)引入到液相,构建新型的大气压等离子体射流液相反应体系,考察了不同APPJ处理方式对铜绿微囊藻的灭活效率,观察了放电处理的藻细胞形态,分析了培养基p H的变化和液相产生的主要活性物质(H2O2和O3)对藻灭活的作用,并探讨了APPJ灭活铜绿微囊藻的作用机理。研究结果表明,当电压为7 k V,空气气体流速为4 L/min,藻液吸光度约为0.200,铜绿微囊藻的灭活率达到99.16%;处理后的藻发生细胞变形和破裂;处理后的藻液中产生H2O2和O3等活性物质,同时产生大量的NO-3和NO-2离子,导致液相p H迅速下降。通过考察主要活性物质(H2O2和O3)及藻液p H因素发现,单一因素灭活效果不佳,主要活性物质(H2O2和O3)和p H的组合因素是APPJ灭活水中铜绿微囊藻的主要原因。     

Aquafluor藻细胞活体分析法在三峡库区次级河流回水区Chla测定中的校准及应用

从三峡库区次级河流大宁河、小江、汤溪河及梅溪河139m回水区中段采集水样,经实验室培养后,用丙酮萃取分光光度法和Aquafluor藻细胞活体分析法测定Chla浓度.通过对Chla萃取值(y)和活体值(x)进行回归分析,得到其回归方程为y=4.15x 2.48,t检验显示回归方程具有线性.在库区次级河流139m回水区富营养化监测中,Chla模拟值与萃取值基本吻合,相对误差＜±7%,故可以采用Chla模拟值对水体富营养化程度进行评价.     

活性红M-3BE脱色真菌的筛选及脱色性能研究

从自然环境中分离到2株对染料活性红M-3BE具有明显脱色效果的真菌,经形态学和26S rDNA序列分析,将其鉴定为Fusarium oxysporum和Geosmithia viridis.采用初始浓度50 mg/L M-3BE的液体培养基同步脱色培养,F.oxysporum在24 h内对M-3BE的脱色率为96%,G.viridis在36 h内的脱色率为82%.对脱色酶系的检测结果表明,脱色过程中F.oxysporum能产生LiP和MnP,G.viridis则仅产生LiP.此外,F.oxysporu和G.viridis对另外7种染料的脱色率也可分别达到16%～100%和83.3%～100%.     

玻璃纸生产废气中CS2和H2S的治理

阐述了玻璃纸生产中CS2和H2S废气产生的原理,介绍了该废气处理的现状,总结了目前普遍采用的冷凝法、活性炭吸附法、活性碳纤维吸附法、改性活性炭吸附法、螯合铁氧化法、吸收-吸附法等处理方法的特点和效果。介绍了一种先采用螯合铁氧化法、再采用冷凝法、最后采用活性炭吸附法的综合处理工艺,可使废气达标排放。     

Multi-stage sampling for large scale natural resources surveys: a case study of rice and waterfowl

Large-scale sample surveys to estimate abundance and distribution of organisms and their habitats are increasingly important in ecological studies. Multi-stage sampling (MSS) is especially suited to large-scale surveys because of the natural clustering of resources. To illustrate an application, we: (1) designed a stratified MSS to estimate late autumn abundance (kg/ha) of rice seeds in harvested fields as food for waterfowl wintering in the Mississippi Alluvial Valley (MAV); (2) investigated options for improving the MSS design; and (3) compared statistical and cost efficiency of MSS to simulated simple random sampling (SRS). During 2000-2002, we sampled 25-35 landowners per year, 1 or 2 fields per landowner per year, and measured seed mass in 10 soil cores collected within each field. Analysis of variance components and costs for each stage of the survey design indicated that collecting 10 soil cores per field was near the optimum of 11-15, whereas sampling >1 field per landowner provided few benefits because data from fields within landowners were highly correlated. Coefficients of variation (CV) of annual estimates of rice abundance ranged from 0.23 to 0.31 and were limited by variation among landowners and the number of landowners sampled. Design effects representing the statistical efficiency of MSS relative to SRS ranged from 3.2 to 9.0, and simulations indicated SRS would cost, on average, 1.4 times more than MSS because clustering of sample units in MSS decreased travel costs. We recommend MSS as a potential sampling strategy for large-scale natural resource surveys and specifically for future surveys of the availability of rice as food for waterfowl in the MAV and similar areas.     

Determination of Frequency for Remeasuring Ground and Vegetation Cover Factor Needed for Soil Erosion Modeling

Determining a remeasurement frequency of variables over time is required in monitoring environmental systems. This article demonstrates methods based on regression modeling and spatio-temporal variability to determine the time interval to remeasure the ground and vegetation cover factor on permanent plots for monitoring a soil erosion system. The spatio-temporal variability methods include use of historical data to predict semivariograms, modeling average temporal variability, and temporal interpolation by two-step kriging. The results show that for the cover factor, the relative errors of the prediction increase with an increased length of time interval between remeasurements when using the regression and semivariogram models. Given precision or accuracy requirements, appropriate time intervals can be determined. However, the remeasurement frequency also varies depending on the prediction interval time. As an alternative method, the range parameter of a semivariogram model can be used to quantify average temporal variability that approximates the maximum time interval between remeasurements. This method is simpler than regression and semivariogram modeling, but it requires a long-term dataset based on permanent plots. In addition, the temporal interpolation by two-step kriging is also used to determine the time interval. This method is applicable when remeasurements in time are not sufficient. If spatial and temporal remeasurements are sufficient, it can be expanded and applied to design spatial and temporal sampling simultaneously.     

TiO2/活性炭催化剂对4-CP的吸附和光催化活性

采用常压金属有机物化学气相沉积技术在活性炭表面沉积构成纳米TiO2催化剂,XRD分析表明,沉积在活性炭表面的TiO2为锐钛矿晶型.TEM分析表明负载量为8%(wt)时,TiO2颗粒的粒径为10-20nm;载体负载前后BET面积仅改变了6%,表明负载TiO2后对活性炭的结构影响不大.利用Langmuir-Hinshelwood动力学模型探讨了TiO2/活性炭催化剂对4-CP的吸附行为和光催化活性之间的关系,求出4-CP降解反应速率常数Kr,在紫外光照条件下催化剂对4-CP的吸附明显增强.     

印染废水中铬的活性炭吸附及资源化研究

在实验室条件下利用活性碳柱对印染废水进行了铬的吸附,对活性碳柱进行逐级加热、逆流漂洗再生,达到了较好的处理效果,同时还回收了铬盐。     

Diffusive gradients in thin films using molecularly imprinted polymer binding gels for in situ measurements of antibiotics in urban wastewaters

• Selective molecularly imprinted polymer (MIP) binding gel was prepared. • MIP-DGT showed excellent uptake performance for antibiotics. • In situ measurement of antibiotics in wastewaters via MIP-DGT was developed. • The MIP-DGT method was robust, reliable, and highly sensitive. Urban wastewater is one of main sources for the introduction of antibiotics into the environment. Monitoring the concentrations of antibiotics in wastewater is necessary for estimating the amount of antibiotics discharged into the environment through urban wastewater treatment systems. In this study, we report a novel diffusive gradient in thin films (DGT) method based on molecularly imprinted polymers (MIPs) for in situ measurement of two typical antibiotics, fluoroquinolones (FQs) and sulfonamides (SAs) in urban wastewater. MIPs show specific adsorption toward their templates and their structural analogs, resulting in the selective uptake of the two target antibiotics during MIP-DGT deployment. The uptake performance of the MIP-DGTs was evaluated in the laboratory and was relatively independent of solution pH (4.0–9.0), ionic strength (1–750 mmol/L), and dissolved organic matter (DOM, 0–20 mg/L). MIP-DGT samplers were tested in the effluent of an urban wastewater treatment plant for field trials, where three SA (sulfamethoxazole, sulfapyridine, and trimethoprim) and one FQ (ofloxacin) antibiotics were detected, with concentrations ranging from 25.50 to 117.58 ng/L, which are consistent with the results measured by grab sampling. The total removal efficiency of the antibiotics was 80.1% by the treatment plant. This study demonstrates that MIP-DGT is an effective tool for in situ monitoring of trace antibiotics in complex urban wastewaters.