Formaldehyde Exposure in a Gross Anatomy Laboratory. Personal Exposure Level Is Higher Than Indoor Concentration (5 pp)

Goal, Scope and Background Cadavers for gross anatomy laboratories are usually prepared by using embalming fluid which contains formaldehyde (FA) as a principal component. During the process of dissection, FA vapors are emitted from the cadavers, resulting in the exposure of medical students and their instructors to elevated levels of FA in the laboratory. The American Conference of Governmental Industrial Hygienists (ACGIH) has set a ceiling limit for FA at 0.3 ppm. In Japan, the Ministry of Health, Labour and Welfare has set an air quality guideline defining two limit values for environmental exposure to FA: 0.08 ppm as an average for general workplaces and 0.25 ppm for specific workplaces such as an FA factory. Although there are many reports on indoor FA concentrations in gross anatomy laboratories, only a few reports have described personal FA exposure levels. The purpose of the present study was to clarify personal exposure levels as well as indoor FA concentrations in our laboratory in order to investigate the relationship between them. Methods The gross anatomy laboratory was evaluated in the 4th, 10th and 18th sessions of 20 laboratory sessions in total over a period of 10 weeks. Air samples were collected using a diffusive sampling device for organic carbonyl compounds. Area samples were taken in the center and four corners of the laboratory during the entire time of each session (4-6 hours). Personal samples were collected from instructors and students using a sampling device pinned on each person's lapel, and they were 1.1 to 6 hours in duration. Analysis was carried out using high performance liquid chromatography. Results and Discussion Room averages of FA concentrations were 0.45, 0.38 and 0.68 ppm for the 4th, 10th and 18th sessions, respectively, ranging from 0.23 to 1.03 ppm. These levels were comparable to or relatively lower than the levels reported previously, but were still higher than the guideline limit for specific workplaces in Japan and the ACGIH ceiling limit. The indoor FA concentrations varied depending on the contents of laboratory sessions and seemed to increase when body cavity or deep structures were being dissected. In all sessions but the 4th, FA levels at the center of the room were higher than those in the corners. This might be related to the arrangement of air supply diffusers and return grills. However, it cannot be ruled out that FA levels in the corners were lowered by leakage of FA through the doors and windows. Average personal exposure levels were 0.80, 0.45 and 0.51 ppm for instructors and 1.02, 1.08 and 0.89 ppm for students for the 4th, 10th and 18th session, respectively. The exposure levels of students were significantly higher than the mean indoor FA concentrations in the 4th and 10th sessions, and the same tendency was also observed in the 18th session. The personal exposure level of instructors was also significantly higher than the indoor FA level in the 4th session, while they were almost the same in the 10th and 18th sessions. Differences in behavior during the sessions might reflect the differential personal exposure levels between students and instructors. Conclusion The present study revealed that, if a person is close to the cadavers during the gross anatomy laboratory, his/her personal exposure level is possibly 2 to 3-fold higher than the mean indoor FA concentration. This should be considered in the risk assessment of FA in gross anatomy laboratories. Recommendation and Outlook If the risk of FA in gross anatomy laboratories is assessed based on the indoor FA levels, the possibility that personal exposure levels are 2 to 3-fold higher than the mean indoor FA level should be taken into account. Otherwise, the risk should be assessed based on the personal exposure levels. However, it is hard to measure everyone's exposure level. Therefore, further studies are necessary to develop a method of personal exposure assessment from the indoor FA concentration.     

A Biomimetic Approach to the Detection and Identification of Estrogen Receptor Agonists in Surface Waters Using Semipermeable Membrane Devices (SPMDs) and Bioassay-Directed Chemical Analysis (12 pp)

Goal, Scope and Background Some anthropogenic pollutants posses the capacity to disrupt endogenous control of developmental and reproductive processes in aquatic biota by activating estrogen receptors. Many anthropogenic estrogen receptor agonists (ERAs) are hydrophobic and will therefore readily partition into the abiotic organic carbon phases present in natural waters. This partitioning process effectively reduces the proportion of ERAs readily available for bioconcentration by aquatic biota. Results from some studies have suggested that for many aquatic species, bioconcentration of the freely-dissolved fraction may be the principal route of uptake for hydrophobic pollutants with logarithm n-octanol/water partition coefficient (log Kow) values less than approximately 6.0, which includes the majority of known anthropogenic ERAs. The detection and identification of freely-dissolved readily bioconcentratable ERAs is therefore an important aspect of exposure and risk assessment. However, most studies use conventional techniques to sample total ERA concentrations and in doing so frequently fail to account for bioconcentration of the freely-dissolved fraction. The aim of the current study was to couple the biomimetic sampling properties of semipermeable membrane devices (SPMDs) to a bioassay-directed chemical analysis (BDCA) scheme for the detection and identification of readily bioconcentratable ERAs in surface waters. Methods SPMDs were constructed and deployed at a number of sites in Germany and the UK. Following the dialytic recovery of target compounds and size exclusion chromatographic clean-up, SPMD samples were fractionated using a reverse-phase HPLC method calibrated to provide an estimation of target analyte log Kow. A portion of each HPLC fraction was then subjected to the yeast estrogen screen (YES) to determine estrogenic potential. Results were plotted in the form of 'estrograms' which displayed profiles of estrogenic potential as a function of HPLC retention time (i.e. hydrophobicity) for each of the samples. Where significant activity was elicited in the YES, the remaining portion of the respective active fraction was subjected to GC-MS analysis in an attempt to identify the ERAs present. Results and Discussion Estrograms from each of the field samples showed that readily bioconcentratable ERAs were present at each of the sampling sites. Estimated log Kow values for the various active fractions ranged from 1.92 to 8.63. For some samples, estrogenic potential was associated with a relatively narrow range of log Kow values whilst in others estrogenic potential was more widely distributed across the respective estrograms. ERAs identified in active fractions included some benzophenones, various nonylphenol isomers, benzyl butyl phthalate, dehydroabietic acid, sitosterol, 3-(4-methylbenzylidine)camphor (4-MBC) and 6-acetyl-1,1,2,4,4,7-hexamethyltetralin (AHTN). Other tentatively identified compounds which may have contributed to the observed YES activity included various polycyclic aromatic hydrocarbons (PAHs) and their alkylated derivatives, methylated benzylphenols, various alkylphenols and dialkylphenols. However, potential ERAs present in some active fractions remain unidentified. Conclusions and Outlook Our results show that SPMD-YES-based BDCA can be used to detect and identify readily bioconcentratable ERAs in surface waters. As such, this biomimetic approach can be employed as an alternative to conventional methodologies to provide investigators with a more environmentally relevant insight into the distribution and identity of ERAs in surface waters. The use of alternative bioassays also has the potential to expand SPMD-based BDCA to include a wide range of toxicological endpoints. Improvements to the analytical methodology used to identify ERAs or other target compounds in active fractions in the current study could greatly enhance the applicability of the methodology to risk assessment and monitoring programmes.     

PAC-SBR法处理制药废水污泥驯化研究

制药废水的特点是成分复杂,有机物浓度高,且含有难生物降解和有抑制作用的抗生素等毒性物质,较为适合的处理方法是生化处理。研究了PAC-SBR反应器处理盐酸林可霉素原料药生产废水过程中活性污泥的驯化。活性污泥经1个月3阶段的驯化后,已基本适应盐酸林可霉素原料药生产废水特性,活性污泥驯化完成。     

煤吸附流态氧特性的测定及其自燃原因分析

用ZRJ-1型煤自燃测定仪对实验煤样的吸氧量作以测定,并按相关规程划分煤的自燃倾向性等级;同时纵向比较平顶山煤业集团公司十矿戊9-10煤层煤样的吸氧量,横向比较不同矿区煤层煤样的吸氧量,然后分析其吸氧量之间差异.考虑到煤自燃是一个极其复杂的物理、化学过程,因此在评价煤的自燃倾向性等级后,再结合所选煤样分析其自燃的原因.分析表明:无烟煤的吸氧量大于烟煤的吸氧量;煤吸附流态氧的量与挥发分有关,无烟煤中活性物质的存在对煤的自燃性有很大影响.     

中美校车安全标准比较研究

为促进我国校车安全标准法规的发展,提高我国校车的安全技术水平,选择美国校车安全标准作为我国校车安全标准比较研究的对象,分别从校车的一般安全、主动安全和被动安全技术条件方面,将我国现已实施的校车安全标准和美国的校车安全标准进行比较。研究结果表明,我国校车安全标准和美国的校车安全标准之间存在一定差异,在应急出口、碰撞试验等方面还存在不足。根据研究结果,提出有关制定适合中国国情的校车安全标准和法规的建议。     

Estimating Sonoran pronghorn abundance and survival with fecal DNA and capture–recapture methods

Population abundance estimates are important for management but can be challenging to determine in low‐density, wide‐ranging, and endangered species, such as Sonoran pronghorn (Antilocapra americana sonoriensis). The Sonoran pronghorn population has been increasing; however, population estimates are currently derived from a biennial aerial count that does not provide survival or recruitment estimates. We identified individuals through noninvasively collected fecal DNA and used robust‐design capture–recapture to estimate abundance and survival for Sonoran pronghorn in the United States from 2013 to 2014. In 2014 we generated separate population estimates for pronghorn gathered near 13 different artificial water holes and for pronghorn not near water holes. The population using artificial water holes had 116 (95% CI 102–131) and 121 individuals (95% CI 112–132) in 2013 and 2014, respectively. For all locations, we estimated there were 144 individuals (95% CI 132–157). Adults had higher annual survival probabilities (0.83, 95% CI 0.69–0.92) than fawns (0.41, 95% CI 0.21–0.65). Our use of targeted noninvasive genetic sampling and capture–recapture with Sonoran pronghorn fecal DNA was an effective method for monitoring a large proportion of the population. Our results provided the first survival estimates for this population in over 2 decades and precise estimates of the population using artificial water holes. Our method could be used for targeted sampling of broadly distributed species in other systems, such as in African savanna ecosystems, where many species congregate at watering sites.     

Using Genetic Profiles of African Forest Elephants to Infer Population Structure,Movements, and Habitat Use in a Conservation and Development Landscape in Gabon

Conservation of wide‐ranging species, such as the African forest elephant (Loxodonta cyclotis), depends on fully protected areas and multiple‐use areas (MUA) that provide habitat connectivity. In the Gamba Complex of Protected Areas in Gabon, which includes 2 national parks separated by a MUA containing energy and forestry concessions, we studied forest elephants to evaluate the importance of the MUA to wide‐ranging species. We extracted DNA from elephant dung samples and used genetic information to identify over 500 individuals in the MUA and the parks. We then examined patterns of nuclear microsatellites and mitochondrial control‐region sequences to infer population structure, movement patterns, and habitat use by age and sex. Population structure was weak but significant, and differentiation was more pronounced during the wet season. Within the MUA, males were more strongly associated with open habitats, such as wetlands and savannas, than females during the dry season. Many of the movements detected within and between seasons involved the wetlands and bordering lagoons. Our results suggest that the MUA provides year‐round habitat for some elephants and additional habitat for others whose primary range is in the parks. With the continuing loss of roadless wilderness areas in Central Africa, well‐managed MUAs will likely be important to the conservation of wide‐ranging species. Utilización de Perfiles Genéticos de Elefantes Africanos para Inferir su Estructura Poblacional, Movimientos y Uso del Hábitat en un Paisaje con Conservación y Desarrollo en Gabón Resumenfgs     

Addressing onsite sampling in recreation site choice models

Independent experts and politicians have criticized statistical analyses of recreation behavior, which rely upon onsite samples due to their potential for biased inference. The use of onsite sampling usually reflects data or budgetary constraints, but can lead to two primary forms of bias in site choice models. First, the strategy entails sampling site choices rather than sampling individuals—a form of bias called endogenous stratification. Under these conditions, sample choices may not reflect the site choices of the true population. Second, exogenous attributes of the individuals sampled onsite may differ from the attributes of individuals in the population—the most common form in recreation demand is avidity bias. We propose addressing these biases by combining two the existing methods: Weighted Exogenous Stratification Maximum Likelihood estimation and propensity score estimation. We use the National Marine Fisheries Service's Marine Recreational Fishing Statistics Survey to illustrate methods of bias reduction, employing both simulated and empirical applications. We find that propensity score based weights can significantly reduce bias in estimation. Our results indicate that failure to account for these biases can overstate anglers' willingness to pay for improvements in fishing catch, but weighted models exhibit higher variance of parameter estimates and willingness to pay.     

城市路面径流污染负荷及采样次数对其估算准确性的影响

在西安市城市主干道南二环路建立路面径流原位采样站,利用自制流量等比例采样装置,采集2009年3月-2010年2月的36场降雨径流,测试各场次径流SS、COD、溶解性COD、NH4-N、Pb、Zn和溶解态Pb、Zn的事件平均浓度(EMC),计算径流年污染负荷,并采用随机抽样方法研究采样次数对污染负荷估算准确性的影响.结果...     

Municipal solid waste generation in Kathmandu, Nepal

Waste stream characteristics must be understood to tackle waste management problems in Kathmandu Metropolitan City (KMC), Nepal. Three-stage stratified cluster sampling was used to evaluate solid waste data collected from 336 households in KMC. This information was combined with data collected regarding waste from restaurants, hotels, schools and streets. The study found that 497.3 g capita(-1) day(-1) of solid waste was generated from households and 48.5, 113.3 and 26.1 kg facility(-1) day(-1) of waste was generated from restaurants, hotels and schools, respectively. Street litter measured 69.3 metric tons day(-1). The average municipal solid waste generation rate was 523.8 metric tons day(-1) or 0.66 kg capita(-1) day(-1) as compared to the 320 metric tons day(-1) reported by the city. The coefficient of correlation between the number of people and the amount of waste produced was 0.94. Key household waste constituents included 71% organic wastes, 12% plastics, 7.5% paper and paper products, 5% dirt and construction debris and 1% hazardous wastes. Although the waste composition varied depending on the source, the composition analysis of waste from restaurants, hotels, schools and streets showed a high percentage of organic wastes. These numbers suggest a greater potential for recovery of organic wastes via composting and there is an opportunity for recycling. Because there is no previous inquiry of this scale in reporting comprehensive municipal solid waste generation in Nepal, this study can be treated as a baseline for other Nepalese municipalities.