Assessment of population exposure to particulate matter pollution in Chongqing, China

To determine the population exposure to PM(10) in Chongqing, China, we developed an indirect model by combining information on the time activity patterns of various demographic subgroups with estimates of the PM(10) concentrations in different microenvironments (MEs). The spatial and temporal variations of the exposure to PM(10) were illustrated in a geographical information system (GIS). The population weighted exposure (PWE) for the entire population was 229, 155 and 211 microg/m(3), respectively, in winter, summer and as the annual average. Indoor PM(10) level at home was the largest contributor to the PWE, especially for the rural areas where high pollution levels were found due to solid fuels burning. Elder people had higher PM(10) exposure than adults and youth, due to more time spent in indoor MEs. The highest health risk due to particulate was found in the city zone and northeast regions, suggesting that pollution abatement should be prioritized in these areas.     

Impact of continental margins in the Mediterranean Sea: Hints from the surface colour and temperature historical record

The surface colour and temperature fields of the Mediterranean Sea, as appearing in time series, of basin-wide images available in the CZCS (1979–1985) and AVHRR (1982–1991) historical archives, differentiate between basin interior and continental margins affected by coastal patterns, river plumes, and mesoscale features. The original data were processed to apply calibration factors, to correct for atmospheric contamination, and to estimate chlorophyll-like pigment concentration and surface temperature. Composites were derived, as monthly and annual means, using a fixed equal-area projection with a 1-km² pixel grid. Enhanced pigment values and lower temperatures along the northern coastal areas (i.e. the Ligurian, Provençal and Balearic basins, as well as the Adriatic, and Aegean Seas) have been associated with the impact of runoff from continental margins (i.e. both a direct impact due to the sediment load and one induced on the planktonic flora by the associated nutrient load) and with vertical mixing due to the prevailing winds (i.e. the Mistral in the northwest, the Bora in the Adriatic, the Etesians in the Aegean). The pattern of increasing pigments and decreasing temperatures in seen to develop in the monthly images from the coastal zone towards the open sea from summer to winter, and then back from winter to summer. The southern coastal areas show different values, namely lower pigments and higher temperatures (except in areas where the data are altered by signal contamination). It is suggested that differences in geomorphology and meteorology of the basin margins have an impact on both water biogeochemistry and dynamics, influencing the biooptical and thermal properties of the various sub-basins, and of the entire Mediterranean region.     

Influence of the zebra mussel and fish fry on structural and functional characteristics of microorganisms in experimental ecosystems

The interactions of zebra mussels, invertebrates, fish, and microorganisms were studied experimentally. Trends in the distribution of total bacterial biomass, the abundance of heterotrophic organisms, and their functional activities in water and grounds were analyzed. The most favorable conditions for development of bacteria developed in June, in the presence of fish and without zebra mussels. In experimental ecosystems with zebra mussels, a decrease in the abundance and activity of microorganisms and a change of dominant yeast forms were observed.     

Effects of ecological factors on the diurnal activity rhythm of Yakutian black-capped marmots (Marmota camtschatica bungei) in the arctic

It is established that the activity of marmots (the genusMarmota) on the surface is timed to the daylight period. In the Arctic, under conditions of continuous illumination (the polar day), the diurnal rhythm of black-capped marmotsMarmota camtschatica bungei on the surface has a “daylight” pattern. The main external regulator of the diurnal rhythm is the altitude of the sun above the horizon. In the cold period, however, the effect of air temperature on animal activity becomes stronger.     

人为泥石流起动及产沙放水冲刷实验——以神府-东胜矿区为例

神府东胜矿区位于黄土高原北部干旱半旱过度地带。由于煤田的大量开采,诱发了大量的环境问题,尤以人为泥石流最为严重,本文以神府－东胜矿区人为泥石流为研究对象,采用人工放水冲刷模拟的方法,分析了坡面型和沟谷型泥石流源地松散体起动、产沙、泥石流过程的特性,所得结论为：（１）放水历时长,强度大,有利于泥石流的形成;（２）弃土石渣起动,是该区泥石流固体物质的主体;（３）沟道型泥石流放水冲刷模拟实验,便于观测石     

硝化污泥低温冲击强化试验

采用完全好氧式膜生物反应器富集耐低温硝化污泥,通过低温冲击强化试验研究硝化污泥的耐低温特性.结果表明,低温对硝化污泥中微生物的群落多样性影响较大,温度越低,微生物多样性越低.低温强化组投加了耐低温高硝化菌含量硝化污泥,使得硝化菌在反应器内生长趋势良好,对低温冲击的恢复更有效果,且低温硝化污泥比中温硝化污泥具有更好的氨氮...     

不同温湿度条件下微米硼的氧化过程研究

目的 探究不同温湿度条件下微米硼的氧化层结构特征。方法 利用高温水浴浸泡处理去除原料微米硼的表面氧化层,然后在恒温恒湿条件下对微米硼进行加速氧化,利用扫描电子显微镜、透射电子显微镜和X射线光电子能谱对加速氧化后硼颗粒的氧化层厚度及组成进行分析,总结表面氧化层结构及成分组成变化规律,揭示温湿度条件下微米硼的氧化机制。结果 微米硼经高温水浴浸泡处理后,表面氧化层去除率达到50%。随着加速氧化时间的延长,硼颗粒氧化层的厚度逐渐增大,由内向外硼颗粒表面可以用B-BxOy-B2O3三层结构来表示,BxOy总是伴随着B2O3同时出现的,且随着氧化反应的进行,颗粒表面BxOy的含量将超过B的含量。结论 不同温湿度条件下微米硼的氧化机制为O2向B颗粒内部单向扩散的反应机制,B先与O2反应,形成低氧化物BxOy,BxOy进而与O2反应生成B2O3。随着氧化层厚度的增加,O2向B颗粒内部扩散的阻力增大,氧化反应速率随之降低。相比湿度的影响,温度的升高可显著加快硼表面氧化层的形成;温度一定时,湿度的增加可促进硼氧化层的形成。     

电子产品野外环境下温循加速载荷谱编制方法

目的 将电子产品在野外环境下日变化波动与季节差异明显的温度载荷编制成温循载荷谱和转换为加速载荷谱。方法 通过四点雨流计数法提取原谱中的载荷循环信息,对提取的循环信息进行分布拟合、相关性检验等统计分析,进而构建循环均值与范围值的联合概率密度函数,再运用概率密度法,编制出8×8二维环境载荷谱。在二维载荷谱基础上,编制出温循载荷谱,使用针对电子部件参数修正的加速方程转化为加速载荷谱。结果 利用野外作业现场1个作业周期内的气温纪录,提供了一套编制温循载荷谱和转换加速载荷谱的合理化流程和解决方案。结论 该制谱方法可以利用原始环境谱中绝大部分有效信息,较好地还原电子部件野外作业阶段经历的温度变化过程,为电子产品的加速寿命试验和使用寿命预测奠定基础。     

管道内瓦斯爆炸温度与压力峰值试验研究

为分析瓦斯爆炸的火焰温度及压力峰值在管道中的传播规律,采用瓦斯管网爆炸测试系统进行试验,通过爆炸压力和爆炸火焰温度采集系统采集数据。在相同点火能量和点火位置的条件下,分析了体积分数对瓦斯爆炸的温度峰值和压力峰值的影响,及温度峰值和压力峰值随管道距离的变化规律。结果表明:当瓦斯体积分数低于9.5%时,温度峰值和压力峰值随瓦斯体积分数增大而增大;同一体积分数下,温度峰值最大值出现在最接近爆源的位置,并呈逐渐下降的趋势,接近爆源的温度峰值下降较明显,随管道延长,温度峰值的下降减慢且趋于平缓;温度峰值与传播距离近似呈三次函数关系;冲击波压力峰值随管道传播呈先上升后下降再上升的波动性变化。     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001