煤炭企业发展低碳经济的动力机制

将影响煤炭企业发展低碳经济的动力因素分为四大类,包括4个拉力因素、1个支撑因素、2个压力因素和4个推动力因素。设计了煤炭企业发展低碳经济的动力机制模型,在分析各个动力因素的基础上,构建了煤炭企业发展低碳经济的拉力机制模型、支撑机制模型、压力机制模型和推动力机制模型。     

充分利用环保倒逼机制促进产业结构调整升级

淄博市污染聚集,环境质量易受外来因素影响,产业结构不合理,污染物排放量大,排放强度高。但其充分发挥环保的倒逼作用,通过建立健全环保政策法规体系,严格执行高于省及国家标准的地方环保标准,大力发展高新技术和现代服务业,加快改造传统产业,极大地促进了产业结构升级和经济发展方式的转变。     

Evaluation of effects of exposure time on aquatic toxicity with zooplanktons using a reduced life expectancy model

Traditionally in toxicological studies time is not studied as quantifiable variable but as a fixed endpoint. The Reduced Life Expectancy (RLE) model which relates exposure time and exposure concentration with lethal toxic effects was tested previously using fish data. In this current paper the effects of exposure time on aquatic toxicity with zooplanktons and various toxicants were evaluated using the RLE model based on ambient exposure concentration. The model was evaluated by plotting ln LT₅₀ against LC₅₀ using toxicity data with zooplanktons from the literature for metal, metalloid and organic compounds. Most of the experimental data sets can be satisfactorily correlated by use of the RLE model, but deviations occurred for some data sets. Those data sets were satisfactorily fitted by a two stage RLE model. This model was based on two phases: one in the peripheral system and other in the central system. Both the single and two stage RLE model support the hypothesis that toxicity is time dependent and decreases in a systematic way with increasing exposure time. A calculated normal life expectancy (NLT) can be obtained from the single stage model and is in accord with reported NLT but those obtained from the two stage RLE model are in excellent agreement.     

SRT对MBR污泥性质的影响

以浸没式膜-生物反应器(SMBR)处理模拟赖氨酸废水为研究体系,考察SRT在10、20和40 d条件下,SMBR中的胞外聚合物(EPS)组分和含量、污泥沉降性能和污泥相对疏水性等污泥性质的变化及其对膜污染的影响。结果表明,随着SRT的延长,混合液中EPS总量呈递减趋势,TBEPS中蛋白质与多糖的比值呈上升趋势,污泥的沉降性能变差,相对疏水性增强;膜通量下降速率变大,膜污染加重。污泥性质与膜污染的相关性表明,膜污染与蛋白质和多糖的比值、污泥沉降性能和相对疏水性呈正相关关系,而与EPS呈负相关关系。     

不同填料载体生物膜对微囊藻毒素的去除效果

利用自行设计的生物膜培养装置,通过对4种不同填料载体进行连续曝气循环培养生物膜,对湖水中的溶解态微囊藻毒素(MCs)的去除作用进行了研究。结果表明,填料载体上生物膜从形成到稳定大约需要3周;生物膜形成后对MCs的去除效率由高到低的顺序是:颗粒活性炭柱>多密孔球型滤料柱>塑料悬浮填料柱>陶瓷滤球柱。在实验水质条件下,当水力停留时间(HRT)=5 h,进水MCs浓度为21.5～47.25μg/L时,颗粒活性炭、多密孔球型滤料柱对MCs的去除率最高可达100%,塑料悬浮填料柱对MC-LR和MC-RR的去除率分别为70%和88%。当HRT=2.5 h时,塑料悬浮填料柱对MC-RR的去除率为MC-LR的2倍。生物膜对MCs的降解效果随温度(5～20℃)和溶解氧的升高而增加。塑料悬浮填料作为合适的生物膜挂膜填料载体对水源水的生物预处理具有良好的应用前景。     

磁性海泡石吸附Cr(VI)特性及动力学

采用化学共沉淀法合成磁性海泡石,通过静态吸附实验研究磁性海泡石对Cr(Ⅵ)的吸附特性及其动力学。结果表明,磁性海泡石对Cr(Ⅵ)的吸附在90 min内即可达到平衡;体系的初始pH是影响磁性海泡石吸附Cr(Ⅵ)性能的重要因素;当废水中Cr(Ⅵ)的初始浓度为50 mg/L时,磁性海泡石的适宜投加量为10 g/L;随反应温度的升高,磁性海泡石对Cr(Ⅵ)的吸附量增加;温度为25、35和45℃时,磁性海泡石对Cr(Ⅵ)的饱和吸附量分别为3.32、3.72、4.08 mg/g;吸附动力学曲线可以用拟二级反应动力学模型拟合;内扩散和液膜扩散联合控制Cr(Ⅵ)在磁性海泡石上的吸附过程,其中内扩散的控速作用大于液膜扩散。     

A multi-agent simulation model for spatial optimisation of manure allocation

The EU Nitrate Directive has spurred many countries to regulate manure production and manure application. Farmers have three allocation options: spreading manure on their own land, transporting manure to other farmers' land or processing manure. The manure problem can be seen as an allocation problem. To better understand this allocation problem, we have developed the spatial mathematical programming multi-agent simulation (MP-MAS) model. This model has been applied in Flanders, Belgium, a region with a high concentration of livestock. The model evaluates the cost efficiency of policy intervention in the manure market through obliged processing. We propose to further optimise the policy using a regionally differentiated manure pressure indicator, which is directly derived from the dual outcome of the mathematical programme. This indicator increases transparency in the manure and processing market, leading to better decision support about location and type of manure processing.     

厌氧折流板式微生物燃料电池堆影响因素研究

微生物燃料电池(MFC)中输出电压/电流的提升,以及反应器体积的扩展放大是其工程化应用的关键。本文构建了一个总体积为6.4 L的新型厌氧折流板式微生物燃料电池堆(ABSMFC)。以葡萄糖作为底物,探讨了阳极材料、液面高程差和水力停留时间(HRT)等因素对ABSMFC性能的影响。结果表明,碳纤维毡作为阳极时,电池单体外电路平均分压(R_(ex)=1 000Ω)为210 mV,填充石墨颗粒后增加到319.8 mV。格室间存在液面高程差时,电池单体、串联和并联的功率密度分别为207.1、181.1和215.7 mW/m~2,当无液面高程差(即水力相连)时为205.8、69.5和151.5 mW/m~2。4个电池单体串联和并联连接时,HRT对ABSMFC的产电稳定性无影响,溶解性COD的去除率和库仑效率均随HRT的增加而升高,且并联效果优于串联。     

铁炭复配修复地下水中NO_3~--N的条件研究

采用了铁炭复配修复地下水中NO3--N,探讨了实验条件对修复效果的影响。结果表明,在pH值近中性条件(初始pH 6.42)下,反应时间为1 h时NO3--N修复率达到60.85%;Fe/C=1∶1时介质最佳用量分别为4~5 g;Fe/C=1/1.5时修复率为72.80%;反应速率在高振荡强度下大于低振荡强度;氧化铜的催化效果最好,可使修复率提高7.5个百分点。铁炭复配介质修复地下水中NO3--N是有效可行的,修复率随反应时间的增加而提高,在Fe/C=1∶1时修复率与介质用量呈正相关,无限减小Fe/C比并不能无限提高修复率,振荡强度对修复具有显著影响,低振荡强度下的修复过程较高强度存在滞后现象,并非所有金属氧化物催化剂对铁炭修复NO3--N均有促进作用。     

超声吹脱去除氨氮的机理和动力学研究

采用超声吹脱技术对某印染厂印染废水中的氨氮进行了处理实验,探索了其反应机理并进行了动力学研究。研究表明,叔丁醇的存在没有降低废水中氨氮的去除率,证明.OH不是超声吹脱去除氨氮反应中的主导氧化物种。通过对反应产物的分析发现,超声吹脱去除氨氮的机理主要是氨氮以游离态的方式在空化效应下高温高压热解成氮气和氢气排出,同时氨气在空化效应产生的超临界状态下传质速度加快,在吹脱条件下更易于从废水中散失。动力学分析表明,印染废水中氨氮的超声去除反应属于一级反应,符合一级反应动力学。