剑麻纤维基多孔炭材料的制备及其吸附氯苯的研究

以剑麻纤维为原料,通过简易的一步炭化活化法制备了一系列多孔炭材料,分别探究了3种温和的金属盐活化剂、活化剂与剑麻纤维的质量比和活化温度对炭材料的氯苯吸附量的影响,并通过BET、SEM、XRD、Raman、FT-IR、元素分析等手段表征其物理化学性质.结果表明,当采用CuCl₂为活化剂、CuCl₂与剑麻纤维的质量比为10∶1及活化温度为800℃时,制备得到的剑麻纤维基多孔炭(PCC)吸附性能最佳,其在氯苯浓度为1560 mg·m^-3时,吸附量达到856 mg·g^-1,而未经CuCl₂活化的炭材料(PC)的氯苯吸附量仅为15 mg·g^-1.氯苯吸附性能的提升主要归因于比表面积、孔容、无序性和表面含氧官能团的增加.此外,采用巨正则系综蒙特卡洛(GCMC)方法模拟氯苯分子在制备的多孔炭材料中的吸附行为,结果表明,该材料中孔径为0.5 nm的孔对氯苯分子的吸附能力最强,且对氯苯吸附起主导作用的为苯环中心和Cl原子与炭材料上连接含氧官能团的H原子之间的静电作用力.     

Improved performance of a biomaterial-based cation exchanger for the adsorption of uranium(VI) from water and nuclear industry wastewater

The amine-modified polyhydroxyethylmethacrylate (poly(HEMA))-grafted biomaterial (tamarind fruit shell, TFS) carrying carboxyl functional groups at the chain end (PGTFS-COOH) was prepared and used as an adsorbent for the removal of uranium(VI) from water and nuclear industry wastewater. FTIR spectral analysis revealed that U(VI) ions and PGTFS-COOH formed a chelate complex. The adsorption process was relatively fast, requiring only 120 min to attain equilibrium. The adsorption kinetic data were best described by the pseudo-second-order equation. The equilibrium adsorption data were correlated with the Sips isotherm model. The maximum U(VI) ions uptake with PGTFS-COOH was estimated to be 100.79 mg/g. The complete removal of 10 mg/L U(VI) from simulated nuclear industry wastewater was achieved by 3.5 g/L PGTFS-COOH. The reusability of the adsorbent was demonstrated over 4 cycles using NaCl (1.0 M) + HCl (0.5 M) solution mixture to de-extract the U(VI). The results show that the PGTFS-COOH tested is very promising for the recovery of U(VI) from water and wastewater.     

Leaching,mobility and persistence of tebufenozide in columns packed with forest litter and soil

Abstract

Leaching, downward mobility and persistence of tebufenozide was investigated under laboratory conditions in columns packed with forest litter and soil, after fortification with the analytical grade material (purity > 99.6%) and with two commercial formulations, RH‐5992 2F (aqueous flowable) and RH‐5992 ES (emulsion suspension). Two types of litter and soil were used: one type with relatively high amounts of sand and the other with high amounts of clay.

The concentrations eluted in the leachates were lower when the analytical material (dissolved in acetone) was used for fortification, than when the two formulations (diluted with water) were used. The amount leached was higher for RH‐5992 2F than for RH‐5992 ES. The type of substrate, i.e., sandy or clay type, had only marginal influence on the amounts eluted in the leachates. Downward movement of tebufenozide from the top 2‐cm layer to the untreated middle and bottom layers (3‐cm segments) was consistently lower when the analytical material was used for fortification, than when the two formulations were used. Downward movement was higher for RH‐5992 2F than for RH‐5992 ES. Persistence of tebufenozide in substrates, maintained under submerged conditions for 70 days after leaching, indicated an initial 2‐week lag period prior to the onset of degradation. Formulation‐related differences were observed in the half‐life (DT₅₀) values. When the analytical material was used for fortification, the DT₅₀ ranged from ca 54 to 59 d. However, when the formulations were used for fortification, the DT₅₀ showed a higher range, i.e., from ca 62 to 67 d for RH‐5992 2F and ca 70 to 80 d for RH‐5992 ES. Formulation ingredients appear to have caused enhanced adsorption of tebufenozide onto the substrates, thus delaying degradation.     

Aflatoxin decomposition in various soils

Abstract

The persistence of aflatoxin in the soil environment could potentially result in a number of adverse environmental consequences. To determine the persistence of aflatoxin in soil, ¹⁴C‐labeled aflatoxin B₁, was added to silt loam, sandy loam, and silty clay loam soils and the subsequent release of ¹⁴CO₂ was determined. After 120 days of incubation, 8.1% of the original aflatoxin added to the silt loam soil was released as CO₂ ? Aflatoxin decomposition in the sandy loam soil proceeded more quickly than the other two soils for the first 20 days of incubation. After this time, the decomposition rate declined and by the end of the study, 4.9% of the aflatoxin was released as CO_2. Aflatoxin decomposition proceeded most slowly in the silty clay loam soil. Only 1.4% of aflatoxin added to the soil was released as CO₂ after 120 days incubation. To determine whether aflatoxin was bound to the silty clay loam soil, aflatoxin B₁ was added to this soil and incubated for 20 days. The soil was periodically extracted and the aflatoxin species present were determined using thin layer chromatographic (TLC) procedures. After one day of incubation, the degradation products, aflatoxins B₂ and G₂, were observed. It was also found that much of the aflatoxin extracted from the soil was not mobile with the TLC solvent system used. This indicated that a conjugate may have formed and thus may be responsible for the lack of aflatoxin decomposition.     

Thermodynamics of interaction of lindane on silty loam and silty clay loam Indian soils

Abstract

Interaction of lindane with silty loam and silty clay loam soils was studied in batch tests at 23, 30 and 37° C. Sorption experiments were carried out at four concentrations and for varying time of contact upto 72 hours. This was followed by desorption studies. No desorption was observed. The sorption data was analysed using sorption equations and evaluating the thermodynamic parameters. The sorption was found to be predominantly entropic in nature and a combined effect of adsorption and chemisorption. The effect of organic matter and other chemical and mineralogical constituents of soils has also been discussed. The sorption with single application of lindane with the two soil types indicates that the insecticide is less likely to reach groundwater.     

IN SITU MEASUREMENT OF ADSORPTION AND BIOTRANSFORMATION AT A HAZARDOUS WASTE SITE1

ABSTRACT: A three well injection-production test was performed at the United Creosoting Company (UCC) site in Conroe, Texas, to estimate the effective in situ retardation factors for adsorption and to evaluate the significance of biotransformation in limiting the transport of polycydic aromatics present in the shallow aquifer. The field test was also used as a model to determine if this type of testing would be feasible at other hazardous waste sites. During the test, chloride, a non-reactive tracer and two organic compounds, naphthalene and paradichlorobenzene (pDCB), were injected into a center well for 24 hours followed by clean ground water for six days. Ground water was continuously produced from two adjoining wells and monitored to observe the breakthrough of these compounds. Data from the test were analyzed by comparing the statistical moments of the chloride and organics distributions. Retardation factors for naphthalene and pDCB were estimated to be 1.03 and 0.97 by comparison of the statistical moments. A significant loss of naphthalene and pDCB was also observed during the three well test, apparently due to biotransformation. These results suggest that biotransformation is the major process limiting the transport of naphthalene and similar compounds at the UCC site.     

USE OF RADAR TO DERWE A STORM INTENSITY-DURATION CURVE1

ABSTRACT: Rainstorms which exceed the design capacity of conveyance systems and cause extensive damage to structures and property, occur frequently in Alberta. After such a severe storm, an early and quick assessment of the storm's location and magnitude and the corresponding frequency for various duration (storm intensity-duration curve) is often required to estimate the damage. The storm intensity-duration curve is produced with information obtained from a sparse network of recording raingages, thus, creating a high degree of uncertainty in the result. Short-duration precipitation is usually quite variable in Alberta; hencea very dense network of recording precipitation stations would be required to provide precise measurements of the storm intensity-duration curve at all locations. Such a dense network does not exist in Alberta; it would be very expensive to install, maintain, and thus difficult to justify financially. One solution for obtaining a large amount of closely spaced in-intensity-duration values is to use weather radar. Using weather radar data, intensity-duration curves could be produced routinely for any set of prespecified locations. The radar data thus have the potential for facilitating the identification of the return period of rainfall events quickly, cheaply, and precisely when the long-term intensity-duration curves are available. As a pilot project to demonstrate the feasibility of the method and the potential of the radar data, computer software was developed to derive from archived radar data, intensity-duration values for up to a 2,500 2 area for a given storm.     

EFFECTS OF INITIAL ABSTRACTION AND URBANIZATION ON ESTIMATED RUNOFF USING CN TECHNOLOGY1

ABSTRACT: Few studies have been conducted to explore the effects of initial abstraction on estimated direct runoff despite the widespread use of the curve number (CN) method in many hydrologic models to estimate direct runoff. In this study, use of a 5 percent ratio of initial abstraction (I_a) to storage (S) to estimate daily direct runoff with modified CN values for a 5 percent I_a/S value was investigated using the Long‐Term Hydrologic Impact Assessment (L‐THIA) geographic information system (GIS). In addition, the effects on estimated runoff of altering the hydrologic soil group due to urbanization were investigated. The L‐THIA model was applied to the Indiana Little Eagle Creek watershed with 5 percent and 20 percent I_a/S values, considering hydrologic soil group alteration due to urbanization. The results indicate that uses of a 5 percent l_a/S and modified CN values and Hydrologic Soil Group D for urbanized areas in model runs can improve long term direct runoff prediction.     

改性树脂NKZ对水溶性染料的吸附特性研究

根据聚合物絮凝剂与染料相互作用机理,用硝基胍对大孔型氯球改性得到了功能化吸附树脂NKZ.从热力学和动力学两方面研究了该树脂对5种水溶性染料的静态吸附特性.结果表明,树脂NKZ对水溶性染料的吸附具有很好的效果.     

瓦勃氏呼吸仪测定乐果合成废水的可生化性

本文概述了瓦勃氏呼吸仪测定有机污染物的可生化性的基本原理和方法。通过测定用乐果合成废水驯化后的微生物的生化呼吸线和相对耗氧速度曲线,结果表明:乐果合成废水是有毒的,但是完全可以被特异驯化后的微生物所降解;其降解速度与时间和废水所含污染物的浓度有关。