Pb(II) removal from water using Fe-coated bamboo charcoal with the assistance of microwaves

Bamboo charcoal(BC) was used as starting material to prepare iron-modified bamboo charcoal(Fe-MBC) by its impregnation in FeCl 3 and HNO 3 solutions simultaneously,followed by microwave heating.The material can be used as an adsorbent for Pb(Ⅱ) contaminants removal in water.The composites were prepared with Fe molar concentration of 0.5,1.0 and 2.0 mol/L and characterized by means of N 2 adsorption-desorption isotherms,X-ray diffraction spectroscopy(XRD),scanning electron microscopy coupled with energy dispersive X-ray spectrometry(SEM-EDS),Fourier transform infrared(FT-IR) and point of zero charge(pH pzc) measurements.Nitrogen adsorption analyses showed that the BET specific surface area and total pore volume increased with iron impregnation.The adsorbent with Fe molar concentration of 2 mol/L(2Fe-MBC) exhibited the highest surface area and produced the best pore structure.The Pb(Ⅱ) adsorption process of 2Fe-MBC and BC were evaluated in batch experiments and 2Fe-MBC showed an excellent adsorption capability for removal Pb(Ⅱ).The adsorption of Pb(Ⅱ) strongly depended on solution pH,with maximum values at pH 5.0.The ionic strength had a significant effect on the adsorption at pH < 6.0.The adsorption isotherms followed the Langmuir isotherm model well,and the maximum adsorption capacity for Pb(Ⅱ) was 200.38 mg/g for 2Fe-MBC.The adsorption processes were well fitted by a pseudo second-order kinetic model.Thermodynamic parameters showed that the adsorption of Pb(Ⅱ) onto Fe-MBC was feasible,spontaneous,and exothermic under the studied conditions,and the ion exchange mechanism played an significant role.These results have important implications for the design of low-cost and effective adsorbents in the removal of Pb(Ⅱ) from wastewater.     

Adsorption of 2-mercaptobenzothiazole from aqueous solution by organo-bentonite

The adsorption behavior of 2-mercaptobenzothiazole onto organo-bentonite was investigated.Natural bentonite from Gaozhou in Guangdong Province,China was collected.Organo-bentonite was prepared by intercalation of cetyltrimethyl ammonium bromide into the natural bentonite.The physicochemical properties of the prepared organo-bentonite were characterized by X-ray diffraction,N2 adsorption-desorption isotherm and Fourier transform infrared spectroscopy.The results showed that montmorillonite is the main component of the natural bentonite.The basal spacing of the natural bentonite is 1.47 nm,which increased to 1.98 nm on intercalation with cetyltrimethyl ammonium bromide.Moreover,both the surface area and pore volume increased with intercalation.Clear CH2 stretching(3000-2800 cm-1) and scissoring(1480-1450 cm-1) modes of the intercalated surfactants were observed for organobentonite.Compared with the pseudo first-order kinetic model,the pseudo second-order kinetic model is more suitable to describe the adsorption kinetics of 2-mercaptobenzothiazole onto organo-bentonite.The adsorption capacity of 2-mercaptobenzothiazole onto organo-bentonite increased with increasing initial concentration of 2-mercaptobenzothiazole,but decreased with increasing adsorbent dosage.The adsorption isotherm of 2-mercaptobenzothiazole onto organo-bentonite fits well with the Langmuir model.The maximum adsorption capacity of organo-bentonite for 2-mercaptobenzothiazole was 33.61 mg/g,indicating that organo-bentonite is a promising adsorbent for 2-mercaptobenzothiazole.     

Removal of Cd2+ from water by Friedel’s salt (FS: 3CaO.Al2O3·CaCl2·10H2O): Sorption characteristics and mechanisms

The development of low-cost and efficient new mineral adsorbents has been a hot topic in recent years. In this study, Friedel’s salt (FS:3CaO·A12O3 ·CaCl2 ·10H2O), a hexagonal layered inorganic absorbent, was synthesized to remove Cd2+ from water. The adsorption process was simulated by Langmuir and Freundlich models. The adsorption mechanism was further analyzed with TEM, XRD, FT-IR analysis and monitoring of metal cations released and solution pH variation. The results indicated the adsorbent FS had an outstanding ability for Cd(Ⅱ) adsorption. The maximum adsorption capacity of the FS for Cd(Ⅱ) removal can reach up to 671.14 mg/g. The nearly equal numbers of Cd2+ adsorbed and Ca2+ released demonstrated that ion-exchange (both surface and inner) of the FS for Cd(Ⅱ) played an important role during the adsorption process. Furthermore, the surface of the FS after adsorption was microscopically disintegrated while the inner lamellar structure was almost unchanged. The behavior of Cd(Ⅱ) adsorption by FS was significantly affected by surface reactions. The mechanisms of Cd2+ adsorption by the FS mainly included surface complexation and surface precipitation. In the present study, the adsorption process was fitted better by the Langmuir isotherm model (R2 = 0.9999) than the Freundlich isotherm model (R2 = 0.8122). Finally, due to the high capacity for ion-exchange on the FS surface, FS is a promising layered inorganic adsorbent for the removal of Cd(Ⅱ) from water.     

γ-Fe_2O_3/膨胀石墨复合材料吸附废水中六价铬的应用研究

介绍了采用溶胶凝胶法合成新型的复合材料-磁性的γ-Fe_2O_3膨胀石墨(MEG)复合材料。通过采用X-射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)以及X-光电子能谱仪(XPS)对该复合材料MEG进行了表征,结果表明MEG中γ一Fe_2O_3的粒径约为50nm,而且其中γ一Fe_2O_3和膨胀石墨通过C=O相互作用。复合材料MEG作为新型的六价铬吸附剂,通过吸附时间、初始溶液的pH值以及再生性对该吸附过程进行了考察。结果表明:在40 min内MEG吸附六价铬的过程基本达到平衡;在初始溶液的pH为3.5时,MEG对六价铬的最大吸附量可以达到16.4mg/g;而且该复合材料MEG重复使用3次后吸附效果基本没有下降。因此,复合材料MEG对于废水中六价铬的处理有选择性吸附作用,而且初始溶液的pH值对其吸附过程起着重要作用。     

吸附法油气回收系统在成品油库中的应用

介绍了活性炭吸附法油气回收系统在成品油库汽油装车过程中的应用情况。结合油库油气回收改造的实际情况,重点介绍了了吸附法油气回收装置的工艺流程、油库油气回收系统的组成、监控系统主要功能、环保检测的相关事项,并分析了油气回收系统的经济效益,结合实际经验对油库油气回收改造提出了建议。     

浙中某县Cd元素地球化学特征及生态效应

本文基于对浙中某县土壤-作物系统的调查研究,系统总结了Cd元素地球化学特征。研究发现,土壤中Cd含量呈现表层富集趋势;土壤Cd元素的赋存形态以离子交换态为主,占各形态总量比例高达39.68%,显示出该地区土壤中Cd的活性相对较强;Cd污染区在南部山区沿水系分布,在研究区北部零星分布。研究同时发现,污染主要是由于矿山开采、工业废物排放以及污水灌溉等人类活动引起,并且污染区已出现稻米样品Cd超标,应引起有关部门足够重视。     

在线气相色谱测定园区中特征污染因子研究

近两年来,随着科学技术的不断发展,在线气相色谱分析仪已逐步在国内监测实际中得到应用,在线气相色谱的应用使挥发性有机物的实时、连续监测成了可能,有效改善了实验室监测数据的滞后性,减少了样品采集、储存、运输过程中产生的误差,结合常州市某化工园区大气特征污染因子预警系统的建设情况,简单介绍了在线气相色谱的工作原理和过程。通过特征污染因子标准曲线的建立和比对试验,说明了在线气相色谱环境监测应用的可行性。     

新型磁性聚谷氨酸吸附剂对水中Pb2+的吸附去除

德岛大学安澤幹人首次利用γ-PGA在Fe3O4磁性纳米颗粒上进行涂层,制得了γ-聚谷氨酸-Fe3O4磁性纳米颗粒（PG-M）.本实验利用透射电镜以及扫描电镜对PG-M吸附剂的形貌进行了分析,发现PG-M与未涂层的Fe3 O4具有相似的形状以及大小,均为不规则的层状结构,且晶粒直径在120～320 nm之间;实验中针对性地对水溶液中Pb2＋进行了吸附探讨.在振荡实验中,通过主要参数的变化（pH值、吸附时间、竞争离子浓度、腐殖酸浓度）,得到如下结果：吸附最佳pH值为7.0;吸附量随着吸附时间的延长而增长,吸附平衡时间为45 min;Na＋对PG-M去除Pb2＋没有很强的干扰性,而Ca2＋则显示出一定的干扰作用;腐殖酸对吸附效果的影响是复杂的,表现为先增强吸附效果,随后降低吸附效果;最佳条件时Pb2＋的最大吸附量为93.3 mg/g.PG-M对Pb2＋的吸附均能较好地符合Freundlich和Langmuir等温吸附模型,其中Langmuir方程能更好地描述PG-M的吸附特征,说明PG-M在水溶液中对金属离子的吸附为单分子层吸附.PG-M吸附符合准二级动力学模型（r2〉0.99）.不同浓度的HCl和HNO3溶液的再生实验发现,0.1 mol/L的HCl溶液作为吸附再生液,可取得较好的再生效果.表明PG-M是可再生的,具有较好的经济性和可持续性.     

中国主要水系沉积物中重金属分布特征及来源分析

本文简要综述了中国主要水系沉积物中重金属(Cd、As、Zn、Pb、Cu、Hg、Cr)的分布特征,系统讨论了区域城市化进程对水环境的影响,分析了重金属污染特征及其来源,并采用潜在生态风险指数法评价了中国主要水系沉积物中重金属的潜在生态危害系数和危害指数。结果显示,中国主要水系表层沉积物中重金属的复合污染状况评价结果是:Cd>Hg>Pb>As>Zn>Cr>Cu。其中,Cd元素的Eir值介于41.25～1755.00之间,属于轻微到极强生态危害,其中大部分样点属于强至极强生态危害。Hg元素的Eir值介于115.29～470.83之间,属于强到极强生态危害,其中大部分样点属于很强至极强生态危害。地区对比而言,综合污染状况以海河和珠江较为显著,长江污染最轻。就其来源来讲,海河流域和珠江流域污染来源主要为工业污染,长江和黄河主要是流域岩石风化和土壤侵蚀。     

活性炭/纳米零价铁复合吸附剂的制备及对砷的去除应用

纳米零价铁在重金属去除领域应用前景广阔。为了大批量、低成本地制备纳米零价铁,本文采用电化学还原法在粒状活性炭表面电沉积纳米零价铁,通过X射线衍射分析对产物的结构进行了表征,并初步探讨了制备的纳米零价铁/活性炭复合吸附剂对模拟地下水中As(III)的去除效果。结果表明,通过自行设计的电沉积装置,成功地在颗粒活性炭上沉积了纳米零价铁颗粒。制备的活性炭/纳米零价铁复合吸附剂对模拟地下水中As(III)的去除效果良好。电化学沉积法制备纳米零价铁,技术可行,成本低廉,在重金属去除领域具有较大的应用潜力。