现代化工分离技术在环境保护中的应用

介绍了高效导向筛板、新型高效填料、超临界流体萃取等现代化工分离技术及其在清洁生产和废物处理方面的应用。     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.     

不同前处理方法对活性炭吸附一氧化碳的影响

本文采用颗粒状活性炭（GH-A)作吸附剂，通过不同的前处理方法，以一氧化碳CO与空气的混合物为分离测定对象，用气固色谱法测定被活性炭充分吸附前、后的混合气体中CO的含量，对比评价几种前处理方法。结果表明，对CO的吸附量显著提高的前处理方法分别是研磨筛分至32—38目、酸洗、添加改性剂So而水洗则降低了活性炭吸附CO的能力。     

Possible Utilization of Silica Gel Sludge for the Removal of Phenol from Aqueous Solutions: Laboratory Studies

This paper discusses the adsorption capacity of silica gel sludge for phenol removal from aqueous solution. Kinetic experiments showed that phenol adsorption was completed after 2 h. Adsorption isotherms were measured for phenol from aqueous solution onto silica gel sludge under various pHs and temperatures. Results showed that the adsorption capacities for phenol was increased as pH decreased from 6.5 to 2. Temperature also was found to affect the adsorption isotherm. As temperature increases from 30 to 50°C, the adsorption capacity increases. The adsorption equilibrium of phenol on silica gel sludge was described by the linear Freundlich and Langmuir models. Furthermore, results showed that the isotherm parameters fit both linearized Langmuir and Freundlich adsorption isotherms. The Freundlich and Langmuir parameters at optimum pH was found as K _f=2.89, 1/n=0.23 and K _d=22.0, q _m=7.98, respectively. Whereas, for those at optimum temperature it was observed as K _f=2.87, 1/n=0.16 and K _d=20.93, q _m=7.91, respectively.     

焦化黄血盐吸收塔填料自燃原因分析

焦化黄血盐系统内的吸收塔在停产检修补充填料——铁刨花期间，经常发生铁刨花自燃现象，这是严重的事故隐患。结合武钢焦化公司黄血盐工艺特点，对其自燃原因作了详细分析，提出了避免此类事故发生的措施。     

染料生物吸附影响因素与解吸条件研究

用筛选出的一株丝状真菌(GX2)对活性、酸性、碱性和直接染料进行吸附及解吸的试验结果表明，该菌株对活性、酸性和直接染料有较高的吸附率，但碱性染料难被吸附；在多种有机溶剂中，丙酮是较好的解吸剂，碱性介质有利于染料的解吸；对菌体进行破碎及在解吸过程中加以搅拌有利于解吸过程的进行。     

黑索金废水的处理

以球形活性炭为吸附剂，用吸附法处理黑索金（ＲＤＸ）废水，出水能够达到国家排放标准，球形活性炭的动态饱和吸附量为０．１２３－０．１４０ｇ／ｇ，吸附带长为２ｍ。吸附饱和的球形活性炭，可用碱液以复再生。笔者还提出了数学模型，导出了处理实验数据公式，此公式可推广应用于同类吸附实验数据处理。     

苯乙烯废水活性炭吸附装置的评价及改进研究

对抚顺石化公司化工塑料厂苯乙烯废水活性炭吸附装置的预处理设施、活性炭吸附及再生性能进行了评价，分析了出水水质超标的主要原因，用混凝沉淀－砂滤流程改进了原处理工艺，使出水水质得到了显著改善。     

焦化厂蒸氨废水硫化物处理方法探讨

对焦化厂蒸氨废水中的有机物进行了ＧＣ／ＭＳ分析，发现酚类，吲哚，喹啉和硫醇是主要污染物成分。对旨在降低蒸氨废水硫化物含量的各种处理方法进行了比较。采用ＣＷＺ－０１吸附剂的吸附法能使废水中硫化物降至３０ｍｇ／Ｌ以下。     

活性炭膜处理工业废水的试验研究

将活性炭膜与常规弹性材料同时作为生物接触氧化处理工艺的填料,分别加装在相同条件的两套接触氧化池中,采用生物接触氧化处理工艺,在同样的条件下处理工业废水,经过对试验数据的对比分析得出:以活性炭膜为填料,处理废水的能力更强,净化效果更好。