有机酸性腐蚀品生产危险性分析

目前我国化工生产中涉及大量有机酸性腐蚀品,通过对某市化工行业调查及分析,发现有机酸性腐蚀品生产普遍,而且生产原料易燃易爆,生产过程存在火灾爆炸危险,结合具体生产工艺,采用预先危险性分析法和作业条件的危险性评价法分析生产过程危险性,从而揭示并概括有机酸性腐蚀品生产危险性.为更好地促进我国安全生产,在此基础上探讨了一些针对性的安全措施.     

覆冰输电塔-线体系风致动力响应分析

依据流体诱发振动原理,结合已有覆冰计算模型,考虑降雨的分类,模拟了输电塔-线体系不同高度导线的覆冰和风荷载。以东北地区某输电塔为例,对覆冰输电塔-线体系在稳定风速激励下的动力响应进行分析,并与不考虑塔线耦联的导线舞动分析结果及覆冰塔线拟静力的分析结果进行对比,对塔位移、输电线位移、钢材应力进行了分析。研究结果表明:塔-线耦联体系对覆冰导线风振有很大影响,覆冰输电塔抗风设计安全度需要进一步提高。     

岩体开挖卸荷过程力学特性分析

基于岩体开挖卸荷过程中力学参数变化理论的分析研究,建立卸荷岩体有限元分析模型,运用ADINA有限元分析软件对岩体进行一维卸荷数值仿真研究。根据有限元数值分析计算成果得到岩体力学参数与主卸荷方向累计开挖卸荷量间的变化关系曲线。结果表明:岩体开挖卸荷过程中,岩体力学参数变形模量、泊松比、粘聚力和内摩擦角等呈现出随开挖卸荷量的变化而发生变化的特征,随卸荷量的增大有减小的趋势,但它们不是从初始值一直减小到零,而是随卸荷量的增大减小到一定的量值后,岩体的裂隙张开、结构面的扩展到一定的程度,岩体的力学参数保持一定的量级不再减小。     

基于整车道路强化腐蚀试验的工况探讨

试验工况是否科学,可以通过对国内外常用试验方法的工况进行对比,发现其存在的差异性及侧重点,并通过调研对试验工况数据切合度进行验证。只有制定出合理的试验工况,才能为腐蚀数据库提供科学的数据支持。     

Performance improvement of airfoils for wind blade with the groove

This study was a basic one to explore how much the aerodynamic characteristics of wind blade improve. The extent of improvement according to the shapes of groove placed on the surface of airfoil (NACA0015) was analyzed through computational analysis. A commercial computational fluid dynamics (CFD) code, the ANSYS Fluent 13, was used in this study. In this study, regarding with the positions and shapes of groove, the end of groove was placed at a certain distance (length, l) from both the front and back of separation starting point, the depth and the width were designated as h and d respectively. Analysis was conducted at the 7° angle of attack under the following conditions; the thickness (δ) of boundary layer to the depth (h) of groove ratio (h/δ) 0.6–1.0, the depth (h) of groove to the width (d) of groove ratio (h/d) 0.1–1.4, and the length (l) between the end of groove and separation point to the thickness (δ) of boundary layer ratio (l/δ) ?0.5–0.5. Among these conditions, the best improvement of lift to drag ratio, standing at 15.3%, was under h/δ = 1.0, h/d = 0.12, and l/δ = –0.5 (7° AOA, Re = 360k). In addition, throughout the range of angle of attack, 2–14°, lift to drag ratio improved by 0.8%, 5.1%, 3.2%, and 1.8% each when Reynolds numbers were 280k, 360k, 450k, and 530k. It is also confirmed that the shape of groove contributed to recovering velocity around airfoil wall and the lift to drag ratio improvements by groove were maintained at the given range of Reynolds number and around the angle of attack, 7°.     

The Relative Importance of Landscape Amenity and Health Impacts in the Wind Farm Debate in Australia

In recent years, Australia has experienced public debate around the growth in wind farms as part of government and community strategies to move from fossil fuels to renewable energy. Many of the arguments put forward by opponents and supporters are similar to those that have been evident in North America and Western Europe, including possible environmental impacts on wildlife, noise levels and, perhaps most prominently adverse changes in ‘landscape amenity’. A concern of increasing prominence is that of adverse human health impacts from proximity to operating turbines. Using analysis of submissions to public inquiries and a small number of detailed interviews, we consider the increased focus in Australia on the health impacts of wind farms. We note that health impacts, as elsewhere in the world, are often part of a suite of objections to wind farm developments but conclude that for some people near such developments, these are the main concern and not a cover or proxy for other concerns, such as changes in landscape amenity and aesthetics.     

Suitable error evaluation criteria selection in the wind energy assessment via the K-means clustering algorithm

In this paper, wind energy potential of four locations in Xinjiang region is assessed. The Weibull distribution as well as the Logistic and the Lognormal distributions are applied to describe the distributions of the wind speed at different heights. In determining the parameters in the Weibull distribution, four intelligent parameter optimization approaches including the differential evolutionary, the particle swarm optimization, and two other approaches derived from these two algorithms and combined advantages of these two approaches are employed. Then the optimal distribution is chosen through the Chi-square error (CSE), the Kolmogorov–Smirnov test error (KSE), and the root mean square error (RMSE) criteria. However, it is found that the variation range of some criteria is quite large, thus these criteria are analyzed and evaluated both from the anomalous values and by the K-means clustering method. Anomaly observation results have shown that the CSE is the first one should be considered to be eliminated from the consequent optimal distribution function selection. This idea is further confirmed by the K-means clustering algorithm, by which the CSE is clustered into a different group with KSE and RMSE. Therefore, only the reserved two error evaluation criteria are utilized to evaluate the wind power potential.     

中和共沉淀—铁氧体法处理含镍、铬废水的实验研究

利用中和共沉淀—铁氧体法处理甘肃某稀有金属生产企业产生的含镍、铬废水,同时对该废水的处理工艺条件进行了实验研究。经测定,废水中Ni 2+质量浓度为50mg/L,Cr(Ⅲ)质量浓度为87mg/L。通过实验得到处理工艺的最佳条件:投料摩尔比(Fe2+/(Ni 2++Cr2O2-7))为9,pH=9,温度为70℃。出水中镍、铬均可达到《污水综合排放标准》(GB 8978—1996)中第一类污染物最高允许排放浓度的要求,为中和共沉淀—铁氧体法处理混合重金属废水的工艺条件研究提供了参考。     

甘肃省风力发电现状及发展对策

介绍了甘肃省的风力资源及风力发电的发展现状,重点阐述了白银地区、玉门地区、酒泉瓜州、金昌地区、敦煌地区和武威地区等几个具有代表性地区的风能资源优势及风电建设情况,指出了甘肃省风力发电在技术和政策等方面目前还存在的主要问题,分析了产生这些问题的原因,提出了促进甘肃省风力发电事业发展的对策。     

风电场环境影响评价原则及评价重点研究

针对风电场环境影响评价的评价原则及评价重点进行了探讨性的研究。提出了风电场环境影响评价应以早期介入和避让措施优先为基本原则;对风电场环境影响评价重点进行了识别,并提出风电场选址的环境可行性分析是风电场环评的重中之重;风电项目建设对生态环境的影响及风机噪声、光影影响也是风电场环境影响评价的重点,并创造性的提出风机噪声光影联合防护区的概念,以期对风电场环境影响评价提供理论及技术参考依据。