硫酸盐生物还原过程中涉硫组分代谢特性

通过硫酸盐生化代谢过程中涉硫组分（SO42-、SO32-、H2S、S2-、S2O32-、微生物含硫）等代谢特性模式研究,揭示了代谢过程中的主要限速步骤及过程代谢产物演替规律。SRB还原过程中限速步骤主要为亚硫酸根转化为硫化氢的过程,利用氮气吹脱硫化氢后,反应终点时各涉硫组分占总硫的51.38%,硫离子的量增加了2.09倍,硫酸根的去除率从83.5%提高到91.24%,亚硫酸根浓度呈现出降低的趋势;pH明显上升,并最终达到8.31,而无吹脱硫化氢的反应器最终pH为6.87。反应器中脱硫弧菌为优势菌,硫化氢被吹脱后,微生物在目、科、属水平上优势菌得到提高,硫化氢的存在抑制了优势菌的增殖。     

废水除磷技术的研究与发展

目前 ,人们越来越重视污水除磷技术。本文介绍与评述了化学和生物两种除磷方式及其除磷机理和工艺 ,并着重介绍了生物除磷的现状、发展和研究动向     

无机超滤技术和生化处理技术在宝钢冷轧含油废水处理中的应用

冷轧废水处理是轧钢工艺中的难点之一。宝钢 2 0 30冷轧废水处理改造工程 ,首次将生化处理技术引入到冷轧含油废水处理工艺 ,并在工程中采用了无机陶瓷超滤技术 ,从而实现了冷轧废水处理的国产化及国内技术总成     

Trace Organic Matter in the Ria Formosa,Portugal

The Ria Formosa lagoon, Portugal, receives organic matter from many natural and anthropogenic sources. This paper presents an overview of the contribution these sources made through the use of lipid biomarkers. Sixty-one surface sediment samples were collected and analysed for a range of lipids. Sewage materials were confined to regions within 2 km of discharge points; phytoplankton biomarkers (sterols and fatty acids) suggest production was greatest in the inner parts of the lagoon that also have greatest inorganic nutrient enrichment; terrestrial organic matter was present in relatively low concentrations as shown by both sterol and fatty alcohols; bacteria were widespread although the Sulphate Reducing Bacteria (SRBs, shown by the presence of 3-OH fatty acids) were located near but not adjacent to sewage discharge points.     

Biodegradation of paclobutrazol by a microbial consortium isolated from industrially contaminated sediment

Biodegradability of the plant growth retardant paclobutrazol by a microbial consortium in which Pseudomonas was the predominant strain was investigated in batch culture. The consortium which had been isolated from an industrially contaminated sediment was proven to be useful for the treatment of effluents containing paclobutrazol. Paclobutrazol was degraded by the pure isolated strain of Pseudomonas sp. as well as the microbial consortium. Paclobutrazol was utilized as the sole source of carbon and energy. Sixty percent of the paclobutrazol was degraded by the microbial consortium from an initial concentration of 54 mg L^?1 within 48 h and more than 98% of an initial concentration of 3.4 mg L^?1 was degraded within 36 h. The optimum temperature and pH were determined to be 30°C and 7.0, respectively. A pure strain of a bacterium, isolated from the enrichment culture was identified as Pseudomonas sp. The microbial consortium was tolerant of high pH and could degrade paclobutrazol faster than the pure strain. The degradation rate of this plant growth regulator in an aerobic environment was greater than that under anaerobic conditions.     

Application of rotating cylinder method for ecotoxicological evaluation of antifouling paints

The environmental impact of two biocide-free antifouling paints, fluoropolymer and silicone types, painted on a test cylinder was assessed using a battery of ecotoxicity test and chemical analyses for organic micro-pollutants such as perfluoroalkyl substances (PFAS). A biocide paint containing zinc pyrithione (ZnPT₂) and cuprous oxide was assessed as a positive control. A standardized laboratory rotating-cylinder method using each test cylinder with artificial seawater was performed for 45 days. After 1?h rotation, the leaked seawater was subjected for bioassay and chemical analyses twice weekly. The seawater extracts from the biocide paint showed adverse effects on bacteria, algae, and crustaceans, but those from the biocide-free paints did not. The leakage seawater from biocide-free paints, after 7-day continuous rotation, contained the same concentration levels of PFAS as blank seawater used to conduct the tests. Thus, no significant toxicities of the biocide-free paints were found under the conditions of this study. Simultaneous analysis of ZnPT₂ and copper pyrithione (CuPT₂) was developed using an HPLC with a polymeric resin column, showing that ZnPT₂ was converted to CuPT₂ by trans-chelation in the leakage seawater from the positive control paint. The experimental results using a laboratory rotating-cylinder method demonstrated that biocide-free paints did not markedly affect three species tested and no PFAS was detected. In contrast, biocide paint was significantly toxic to test species and toxicity of the extract on bacteria was partly responsible for CuPT₂ produced in leakage seawater. Thus, a laboratory rotating-cylinder method may be applied for ecotoxicological assessment of antifouling paints.     

Genetic toxicology of metal compounds: An examination of appropriate cellular models †

Bacterial systems have not had success predicting metal carcinogenicity. Hypotheses explaining this failure are examined. Using a broad genetic endpoint, λ prophage induction, under sub‐toxic growing conditions, genotoxicity is seen for compounds of chromium, manganese, lead, molybdenum and tungsten. Copper, manganese, arsenic and molybdenum compounds enhanced UV mutagenesis in E. coli WP2.

The toxicity of metal compounds to cultured mammalian cells correlates well with rat oral LD₅₀ values. Whereas insolubility can present problems in bacterial studies, concentrations of metal compounds toxic to mammalian cells can be determined even in the presence of precipitate, and sometimes [Pb(NO₃)₂, BaCl₂ and BeCl₂] occurs only in its presence. PbS and MnS, which are insoluble, are much more toxic than the more soluble compounds Pb(NO₃)₂ and MnCl₂. These results demonstrate the importance of cellular phagocytosis of insoluble metal compounds as a factor in studying the toxicity and genotoxicity of metal compounds.     

Large plasmids governing multiple resistances to heavy metals: A genetic approach∗

Gram negative bacteria classified as Alcaligenes eutrophus and carrying large resistance plasmids (generally two) were found in various industrial sites highly contaminated by heavy metals (Zn⁺⁺, Cu⁺⁺, Co⁺⁺,...). These strains were detected by DNA hybridization with a probe made with a 9kb fragment (ccz⁺ fragment) encoding for resistances to Cd⁺⁺, Co⁺⁺ and Zn⁺⁺, and cloned from plasmid pMOL30. This plasmid was isolated from the representative strain A. eutrophus CH34 which harbours the plasmids pMOL30 (240 kb) and pMOL28 (165 kb). Phenotypes related to pMOL28 and pMOL30 include the tolerance to Cd⁺⁺, Co⁺⁺, Cr0₄ ⁼, Cu⁺⁺, Hg⁺⁺, Ni⁺⁺, Pb⁺⁺ and Zn⁺⁺. The described genetic properties of these plasmids refer to some cloned or mapped functions and to some plasmid rearrangements. Plasmid pMOL85 (250 kb) which is related to pMOL30 was also described. Its host (A. eutrophus DS185) was isolated from a zinc desert. pMOL85 can efficiently self transfer in plasmidfree derivatives.     

Autotrophic denitrification using hydrogen oxidizing bacteria in continuous flow biofilm reactor

Autotrophic denitrification was investigated in five bench‐scale upflow attached growth reactors using hydrogen oxidizing bacteria under anoxic conditions. The performance of sand, granular activated carbon (GAC), crushed pumice, crushed volcanic rock, and plastic media were evaluated as the support material. The reactors were inoculated with acclimated cultures obtained from domestic sewage treatment plant. A synthetic solution containing nitrate was used as the influent. The reactor performance was evaluated by measuring influent and effluent nitrate concentration. The design parameters demonstrated that the effectiveness of autotrophic denitrification is comparable to that of the heterotrophic process and may be utilized economically for drinking water treatment either as the main process or as a supplemental process for ion exchange regenerant treatment.     

Characterisation and identification of carbofuran-utilising bacteria isolated from agricultural soil

A total of 96 bacterial cultures were isolated from soil. Seventeen bacterial isolates were selected following their cultivation on solid media containing 100 mg · L^?1 carbofuran as the sole source of carbon and nitrogen. Of the 17 isolates, 10F, 11M, 17N, 23B and 26M were specifically chosen because of their relatively higher growth efficiency and genetic diversity based on Box-polymerase chain reaction analysis. These bacterial cultures had 16S rRNA gene sequences that were most similar to Acinetobacter baumannii (10F), Agrobacterium tumefaciens (11M), Ochrobactrum anthropi (17N), Escherichia coli (23B) and Agrobacterium tumefaciens (26M) with 97, 95, 93, 95 and 94% similarity in their 16S rDNA gene sequence, respectively. Degradation rates of carbofuran in soil inoculated with these isolates were 1.9, 1.5, 1.6, 1.7 and 1.6 times, respectively, faster in comparison with uninoculated soil after 10 days of incubation. The maximum degradation rates of carbofuran (45 and 91%) were detected in soil inoculated with A. baumannii (10F) after 10 and 20 days’ incubation, respectively. These data indicate that these isolates may have the potential for use in bioremediation of pesticide contaminated soil.