大气自净能力指数的气候特征与应用研究

为了定量地评估污染气象条件对空气污染的作用并实现对空气污染潜势的预报,本文在城市大气污染数值预报系统（CAPPS）预报原理的基础上,定义了大气自净能力指数,并分别给出了采用气象站观测资料和通过数值模拟计算大气自净能力指数的方法.基于气象站观测资料的全国大气自净能力指数分析计算表明,全国大气自净能力最差的地区分布在四川盆地和新疆塔里木盆地,大气自净能力最强的地区分布在青藏高原、蒙古高原、云贵高原、以及东北平原和三江平原、山东半岛和海南岛;1961~2017年,京津冀、长三角和珠三角地区的大气自净能力指数呈下降的变化趋势,全年低自净能力日数呈上升的变化趋势.采用大气自净能力指数评估2014年北京APEC会议期间大气污染防控效果,表明在11月8~10日极端不利扩散气象条件发生时,减排措施使北京市空气质量AQI平均降低77%,使京津冀平原地区11个城市的空气质量AQI平均降低37%.基于国家气候中心月动力延伸气候预测模式（DERF2.0）的预报产品和中尺度模式（WRF）,建立了可以预测全国未来40d逐日大气自净能力指数的延伸期-月尺度大气污染潜势预测系统,回报实验表明,在大多数情况下可以提前15d预报出大气重污染过程;月尺度的大气重污染过程预报效果更大程度上取决于月动力延伸气候预测模式（DERF2.0）的预报准确率.     

基于静止卫星GOCI传感器的大气污染过程AOD监测

针对北京及周边地区2017年11月2~8日的一次污染过程,利用韩国静止卫星COMs1GOCI数据,对北京地区进行AOD监测.AOD反演采用时间序列迭代算法,根据地表反射率随时间慢变而大气气溶胶随时间快变的理论,采取最小值拟合的方式,获取气溶胶光学厚度数据.反演结果与地基AERONET监测结果具有很好的一致性,两者的相关系数R²大于0.89.AOD监测结果表明,GOCI传感器1次/h的监测频率,可以很好地展现北京地区大气污染过程的开始,发展及消散过程,可以展示出一天之内AOD的变化,为大气污染监测以及气候变化研究提供依据.     

构树修复对重金属污染土壤环境质量的影响

通过温室盆栽试验,研究构树（Broussonetia papyrifera）生长对重金属污染土壤酶活性和微生物群落结构的影响.结果表明,构树修复污染土壤中酶活性和微生物多样性明显提高.经270d培养后,构树生长土壤中蔗糖酶和酸性磷酸酶活性与种植土壤相比分别显著（P<0.05）提高3.12倍和2.29倍;土壤脱氢酶与有效态As、Cd、Pb、Zn和Cu含量,蔗糖酶与有效态Cd含量,以及磷酸酶与有效态Cd和Cu含量之间呈显著负相关（P<0.05）.根据16S和18S rDNA PCR-DGGE分析表明,构树修复可提高污染土壤中细菌和丛枝菌根真菌多样性.上述结果表明,构树修复可有效改善重金属污染土壤的环境质量.然而,污染土壤中重金属有效态含量下降不明显,必须辅助物理和化学措施来强化构树对重金属污染土壤的生态修复潜力.     

某型飞机外翼5—8肋损伤原因分析及修复探讨

目的 分析某型飞机外翼5—8肋油箱区结构不同程度损伤的原因,制定修复方案。方法采用受载分析、有限元仿真计算、静力试验数据分析等强度计算方法分析损伤产生的原因,采用扫描电子显微镜和光学显微镜对磨痕形貌进行观测等失效分析,对损伤结构件开展失效模式分析,根据损伤原因及失效模式制定科学简便的修复方案,同时对损伤长桁采取的修补措施进行强度校核。结果 通过对外翼油箱充压破坏理论分析、有限元仿真计算、静力试验数据反推,并结合飞机实际损伤情况,得出油箱破坏理论分析危险薄弱部位与真实破坏情况一致的结论。有限元仿真计算最危险结构部位与实际结构首先发生破坏部位吻合,可作为深入制定修复方案及推测实际加载压力的依据。通过静力试验数据反推、结构实际损伤及有限元仿真计算结论得出,外翼5—8肋结构出现损伤时油箱施加压力约0.5 MPa,针对损伤制定了更换外翼油箱内部第5—8肋损伤结构和贴补加强损伤长桁的修理方案,经结构强度校核,满足设计要求。结论 分析认为外翼5—8肋油箱区结构损伤原因为油箱压力超过设计值导致结构过载断裂,采用贴补加强修理损伤长桁和更换第5—8肋损伤结构的修复方案能够满足强度设计要求,可指导同类飞机类似结构损伤故障的原因分析和修理,提醒同类飞机维修人员在飞机维护时应关注外翼油箱压力超压问题。     

基于VA One船舶舱室动力设备空气噪声控制分析

目的研究舱室间壁板不同约束条件及不同敷设方式对隔声量的影响。方法用VA One建立两个舱室的统计能量分析(Statistical Energy Analysis,SEA)模型,对约束阻尼结构和自由阻尼结构的隔声性能进行分析。针对约束阻尼结构,讨论其两侧金属层厚度差对整个壁板的隔声性能的影响;对自由阻尼结构,分析金属层与阻尼层之间的相对位置对其隔声性能影响。结果约束阻尼结构隔声量A计权声压级比自由阻尼结构高。结论阻尼层厚度和壁板总厚度一定时,自由阻尼结构金属层与阻尼层之间的相对位置对实际的隔声性能并没有影响;约束阻尼结构,两侧金属层等厚敷设时,其隔声效果最优,且两侧厚度差越大隔声量越小。     

FRP加固金属结构技术应用研究进展

从FRP加固金属结构设计研究、界面性能研究、工艺研究、耐久性研究等4个方面回顾了FRP加固金属结构技术的发展历程。探讨了FRP加固技术的优势,总结了现阶段FRP修复技术取得的成就和现阶段发展存在的不足。最后,对未来FRP修复技术的发展做了总结。可以预见,随着高性能FRP的不断研制成功以及研究的深入,FRP修复技术必将得到更广泛的应用。     

Monitoring Air Quality in Mountains: Designing an Effective Network

A quantitatively robust yet parsimonious air-quality monitoring network in mountainous regions requires special attention to relevant spatial and temporal scales of measurement and inference. The design of monitoring networks should focus on the objectives required by public agencies, namely: 1) determine if some threshold has been exceeded (e.g., for regulatory purposes), and 2) identify spatial patterns and temporal trends (e.g., to protect natural resources). A short-term, multi-scale assessment to quantify spatial variability in air quality is a valuable asset in designing a network, in conjunction with an evaluation of existing data and simulation-model output. A recent assessment in Washington state (USA) quantified spatial variability in tropospheric ozone distribution ranging from a single watershed to the western third of the state. Spatial and temporal coherence in ozone exposure modified by predictable elevational relationships ( 1.3 ppbv ozone per 100 m elevation gain) extends from urban areas to the crest of the Cascade Range. This suggests that a sparse network of permanent analyzers is sufficient at all spatial scales, with the option of periodic intensive measurements to validate network design. It is imperative that agencies cooperate in the design of monitoring networks in mountainous regions to optimize data collection and financial efficiencies.     

阿图什市空气质量变化趋势分析

分析了阿图什市“八五”至“九五”期间空气质量监测数据不同年度、不同季节及不同污染因子的动态变化趋势．结合当地能源结构、气候特征、城市环境综合发展水平，指出影响阿图什市空气质量的主要因素，为防治和减轻阿图什市的空气污染提供了科学依据。     

Economic development and environmental protection: an ecological economics perspective

This paper argues on both theoretical and empirical grounds that, beyond a certain point, there is an unavoidable conflictbetween economic development (generally taken to mean 'materialeconomic growth') and environmental protection. Think for a moment of natural forests, grasslands, marine estuaries, salt marshes, and coral reefs; and of arable soils, aquifers, mineraldeposits, petroleum, and coal. These are all forms of 'natural capital' that represent highly-ordered self-producing ecosystemsor rich accumulations of energy/matter with high use potential (low entropy). Now contemplate despoiled landscapes, eroding farmlands, depleted fisheries, anthropogenic greenhouse gases,acid rain, poisonous mine tailings and toxic synthetic compounds.These all represent disordered systems or degraded forms of energy and matter with little use potential (high entropy). The main thing connecting these two states is human economic activity. Ecological economics interprets the environment-economyrelationship in terms of the second law of thermodynamics. The second law sees economic activity as a dissipative process. Fromthis perspective, the production of economic goods andservices invariably requires the consumption of available energy and matter. To grow and develop, the economynecessarily 'feeds' on sources of high-quality energy/matter first produced by nature. This tends to disorder and homogenizethe ecosphere, The ascendance of humankind has consistently been accompanied by an accelerating rate of ecological degradation, particularly biodiversity loss, the simplificationof natural systems and pollution. In short, contemporary political rhetoric to the contrary, the prevailing growth-oriented global development paradigm is fundamentally incompatible with long-term ecological and social sustainability. Unsustainability is not a technical nor economic problem as usually conceived, but rather a state of systemic incompatibilitybetween a economy that is a fully-contained, growing, dependent sub-system of a non-growing ecosphere. Potential solutions fly inthe face of contemporary development trends and cultural values.     

Distribution of airborne particles from multi-emission source

The purpose of this work was to study the distribution of airborne particles in the surroundings of an iron and steel factory in southern Finland. Several sources of particulate emissions are lying side by side, causing heavy dust loading to the environment. This complicated multi-pollutant situation was studied mainly by SEM/EDX methodology.Particles accumulated on Scots pine bark were identified andquantitatively measured according to their element content,size and shape. As a result, distribution maps of particulateelements were drawn and the amount of different particle typesalong the study lines was plotted. Particulate emissions fromthe industrial or energy production processes were not themain dust source. Most emissions were produced from theclinker crusher. Numerous stockpiles of the industrial wastesand raw materials also gave rise to particulate emissions as aresult of wind erosion. It was concluded that SEM/EDXmethodology is a useful tool for studying the distribution ofparticulate pollutants.