Thermal hazard and decomposition kinetics of 1-butyl-2,3-dimethylimidazolium nitrate via TGA/DSC and FTIR

1-Butyl-2,3-dimethylimidazolium nitrate ([Bmmim][NO₃]), a kind of versatile and novel ionic liquids, is widely applied in the modern petrochemical industry. Nevertheless, its thermal hazard safety data at high temperature or thermal disturbance conditions are currently unavailable. Therefore, this study aimed to characterize the thermal risk of [Bmmim][NO₃] through auto-ignition temperature measurements, flash point analysis, thermal gravimetric analysis/differential scanning calorimetry (TGA/DSC), TGA-Fourier transform infrared spectroscopy (TGA-FTIR) and thermal decomposition kinetics analysis. Additionally, [Bmmim][NO₃] was examined using isothermal thermogravimetric analysis at different temperatures (220, 230, 240, 250, 260 and 270 °C). The experimental results show that the flash point of [Bmmim][NO₃] is 305.70 ± 9.30 °C and the auto-ignition temperature is 341.00 ± 21.60 °C with an ignition delay time of 8.6 s. In addition, using the nitrogen atmosphere TGA data to calculate the activation energy according to the Friedman, Kissinger and Flynn-Wall-Ozawa methods, roughly the same results were obtained. Finally, TGA-FTIR results show that [Bmmim][NO₃] produced acetylene, butane, butanol and carbon dioxide during the thermal decomposition process. This study could provide data support and some guidance for the thermal hazard assessment and safety control of [Bmmim][NO₃] during its use and storage.     

取芯过程中煤芯温度分布特征模拟研究*

针对取芯过程瓦斯解吸受煤芯的温度影响不明,造成煤层瓦斯含量测不准的问题,开展对取芯过程煤芯温度分布特征研究。采用自主研制的取芯管自动测温装置在赵固二矿原生结构煤层（f=1.71）进行深度20 m的取芯试验,获得取芯管管壁温升变化规律,变化曲线分为4个阶段:缓慢上升、加速上升、减速上升、缓慢下降阶段;应用COMSOL建立含瓦斯煤传热模型,将管壁的温度变化设置为边界条件,模拟取芯过程煤芯与管壁之间的热交换。结果表明:在取芯时间30 min内,煤芯平均温度快速上升,之后上升速度趋于平稳;在煤芯内,相同时刻,等间距的轴向与径向距离,径向较轴向的温度梯度较大,径向传导快于轴向传导;取芯过程煤芯径向温度Ta与径向距离d、时间t满足指数函数关系。研究结果可为测定取芯过程煤芯的瓦斯损失量提供参考依据。     

Management and Limnology Interact to Drive Water Temperature Patterns in a Middle Rockies River‐Reservoir System

This study seeks to improve understanding of temperature patterns in reservoir outflows. We examined water temperatures in an irrigation storage reservoir, Island Park Reservoir, and its outflow, Henry’s Fork of the Snake River in eastern Idaho. Our objectives were to (1) quantify the extent to which daily temperature ranges in the reservoir outflow deviated from other reaches of the Henry’s Fork, and (2) test whether the reservoir’s net volume change during the summer — expressed as the volume of water remaining in the reservoir on September 1 — predicted mean summer temperature in the outflow. Two years of temperature data showed dampened diel temperature cycles in the reservoir outflow. Model selection with 17 years of climatic, hydrologic, and reservoir management variables found mean summer temperature in the outflow was best predicted by September 1 reservoir volume and average summer air temperature. Two years of weekly reservoir thermal profiles indicated large changes in reservoir volume eliminated cool hypolimnetic water and encouraged mixing, allowing warm epilimnetic water to be discharged into the outflow. Increases in future drought frequency and severity and increases in summer air temperatures could increase the frequency of occurrence of high mean summertime water temperatures in the outflow. Our study provides important information for local managers by quantifying influences on outflow temperatures and the downstream river ecosystem.     

Extrinsic modeling and simulation of helio-photovoltaic system: a case of single diode model

Simulation of helio-photovoltaic system is continuously undergoing revolution through diverse parameter modifications which closely mimic the experimental data. In retrospect, the current work has presented a nonlinear modification of equivalent circuit parameters and simulated the same for different semiconductors (crystalline and thin films); furthermore, established a mathematical relation between the coefficients of solar irradiance and module temperature (SIMT); moreover, investigated the influence of SIMT on the model parameters. The simulation upshot reveals that increment in solar irradiance (SI) intensifies the output current whereas an increase in module temperature (MT) diminishes the output voltage; the SIMT coefficients developed validated well with the manufacturers data; the influence of SI was evident on the photon current, diode current, and shunt resistance whereas the effect of MT was pronounced on the diode current, ideality factor, and shunt resistance. Thus, the provision made by this work is essential for advanced design and simulation of helio-photovoltaic systems.     

Use of artificial roughness for performance enhancement of solar air heaters—a review

The performance characteristics of a solar air heater can effectively be improved by providing artificial roughness in the form of protrusions and dimples of various shapes, sizes, and orientations on the underside of heated surface. An extensive literature review on artificial roughness elements has been carried and the correlations developed for heat transfer and friction factor for roughened solar air collector have been discussed and presented in this paper. The performance parameter has also been computed and compared with various kinds and shapes of roughness geometries using correlations developed by various investigators. The optimum values of the roughness parameters obtained by several investigators have also been discussed.     

地下煤火回风裂隙火风压分布实验研究

利用煤田露头火区模拟实验装置,通过对煤火燃烧过程中出风裂隙内气体温度的监测,发现裂隙内气体的温度沿裂缝逐渐降低并成指数衰减分布。通过分析得到火区裂隙温度的分布方程并计算得到了裂隙内火风压分布方程,得出煤田火区火风压的影响因素主要有自燃煤层温度、自燃深度和裂隙倾角。     

温度对多孔射气介质氡析出影响试验研究

为了研究围岩中温度对氡析出率的影响,选取某铀矿铀尾矿矿砂试样,根据相似准则设计并制作了测量多孔射气介质氡析出率的室内试验装置。采用RAD-7氡测量仪,运用等时间间隔取样方法测量氡浓度。采用对照试验的方法研究了温度对多孔射气介质氡析出率的影响规律。试验结果表明,在自然压力下,在温度为20℃到60℃范围内,随着温度的升高,多孔介质氡析出率逐渐增大,并且氡析出率与温度符合线性函数关系。     

浮射流特性对工业建筑室内污染物分布影响研究

在前人实验数据误差分析的基础上,基于空间热及污染物分布相关理论,采用数值模拟方法,对不同浮射流强度下热及污染物分布过渡区进行研究。研究表明,浮射流强度较低(如373 K)时,污染物分布过渡区将增厚,部分污染物由于扩散作用将与热出现明显分离现象,扩散至建筑下部空间,影响工艺及人员健康。     

输电线路山火跳闸机理的模拟实验研究

山火发生时植被燃烧产生的高温火焰及烟羽流使架空输电线路的空气绝缘性能大幅降低,可能引发导线之间或导线对地面间的击穿放电现象,导致输电线路发生跳闸事故。选取正庚烷与木垛为代表性火源,模拟研究直流高压电在火焰中的击穿放电现象,测量了火焰温度和电阻参数,获得了不同火源条件下放电间隙的击穿电压,分析了火焰参数对间隙击穿场强的影响。实验结果表明,正庚烷和木垛火焰放电实验中,火焰高温和电导率是导致击穿场强下降的主要因素。此外,烟颗粒也会导致击穿场强下降。     

胶合竹材单面受火炭化及温度场试验研究

格鲁班(Glubam)胶合竹材作为一种新型建筑材料,研究其耐火性能并与木材进行比较,对胶合竹材单板及杉木单板分别进行了恒温及ISO 834标准升温条件下的单面受火试验,测得了其炭化速率及不同受火条件下试件内部的温度-时间变化曲线。结果表明,胶合竹材的炭化速率低于杉木,其炭化规律与木材相似,即在受火初期炭化层厚度增加较快,炭化速率较大,随时间延长炭化速率逐渐降低,且受火温度越高,材料的炭化速率越大,同时试验测得在标准火灾条件下,胶合竹材受火20 min的平均炭化速率为0.64 mm/min。此外,通过温度场数据的分析比较发现,胶合竹材的传热速率明显低于杉木,其具有优于杉木的隔热性能,且能够满足相关规范对建筑构件隔热性能的要求。