冲击载荷作用下某型气囊缓冲性能影响研究

目的 研究冲击载荷作用下排气孔面积及初始缓冲时刻对某型气囊缓冲性能的影响.方法 采用MIMICS软件,并结合LS-Prepost软件,建立髋骨-气囊-地面有限元模型,利用LS-DYNA软件对气囊的缓冲过程进行仿真计算,得到缓冲过程中该模型的动力学响应结果.通过分析髋骨模型受力及气囊状态的变化,探讨排气孔面积及初始接触时...     

饱和软土刚性长短桩复合地基——强度及变形实用计算公式

刚性长短桩复合地基有许多特点，如桩体均为刚性、短桩及长桩桩端为低压缩或中压缩性土等。长短桩复合地基的设计理论目前仍处于研究阶段，现行规范中尚无有关其强度及变形的具体计算方法。重点探讨了饱和软粘土体上采用刚性长短桩复合地基的强度及变形理论，并提出了适用于工程应用的实用计算方法。     

实际烟气生成量计算方法的商榷

火灾烟气是火灾时所产生的气体和悬浮在其中的烟粒子的总称，是燃烧和热解产物的混合物。烟气量的大小取决于可燃物本身的燃烧性能、空气供给量等。火灾烟气具有缺氧、毒害、尘害、高温的特点，加上火场火灾烟气的减光性和恐怖性，使火灾烟气成为火灾人员伤亡的最主要原因，为此防排烟工程的设计对建筑消防安全非常重要，实际烟气生成量计算是防排烟工程设计的理论基础，就目前一些文献对实际烟气量计算方法存在的不足进行了探讨，并提出了一个新的计算方法，对两种方法的计算结果进行了对比，得出结论认为，计算实际烟气量应从实际空气供给量是否过剩或不足两种情况分别进行考虑计算。     

建筑抗震设计地震作用折减系数的取值方法

地震作用折减系数在建筑抗震设计中是政策性、技术性和经济性的综合指标。本文以钢筋混凝土框架结构为例,从技术上介绍了地震作用折减系数的确定原则。在简要介绍我国建筑抗震设计规范设计地震作用—延性等级组合运用中存在不足的基础上,论述了地震作用折减系数三个分量的基本特点,并分四个步骤介绍了其计算取值方法。推荐方法可为建筑抗震设计确定合理的地震作用折减系数提供有益的参考。     

基于气囊缓冲的某火箭炮着陆冲击分析

目的减小火箭弹着陆冲击加速度。方法基于LS-DYNA瞬态动力学分析软件和冲击动力学理论,采用有限元软件HYPERMESH建立火箭炮-气囊系统有限元模型,采用显式动力学方法对火箭炮-气囊系统的着陆冲击缓冲过程进行仿真。分析火箭炮在正常着陆工况下,火箭弹的着陆冲击响应,得出空投装备速度、加速度变化曲线,以及气囊的体积、压力曲线。结果在正常着陆工况下,火箭弹横向加速度的最大值为122 m/s2,小于安全的横向加速度;火箭弹纵向加速度的最大值为48.3 m/s2,小于安全的纵向加速度;火箭弹的最大轴向力为2640 N,小于安全闭锁力。结论在火箭炮着陆冲击过程中,气囊缓冲装置吸收了大部分冲击能量,起到了良好的缓冲作用,火箭弹的冲击加速度、闭锁力均在安全范围内。采用显式动力学方法对火箭炮的着陆冲击过程进行分析是可行的。     

地下水环境智慧监管技术集成与平台应用研究

针对"双源"地下水(地下水污染源和集中式地下水型饮用水源)环境监管需求,研发了一套集地下水污染在线监测预警、评价溯源、预测应急于一体的可视化技术集成与应用平台。该平台将物联网、地下水数值模拟、大数据、云计算等技术集成应用于环境监管,实现了工业园区地下水环境实时动态监测评价及预警、地下水污染路径溯源计算、地下水事故污染预测及应急支撑等网络服务与计算功能,并通过地下空间三维数字化处理,构建了"所见即所得"的三维虚拟现实界面,实现了对地下水环境的便捷、高效监管与决策。该平台兼容手机、平板电脑、台式计算机等固定和移动设备,可为"双源"地下水污染监控、管理和应急提供实时、高效的科技支撑。     

基于非均匀入口条件SCR系统气固相组分的分布特性优化

采用实际工程中复杂的非均匀入口边界条件,对SCR系统气固两相流动特性及其优化进行了数值模拟。对烟道混合器下游截面上各测点处NO浓度进行实验测试,与数值模拟计算的NO浓度结果保持基本一致,模拟计算获得了SCR反应器入口导流板布置数量、倾角以及导流板间距的最优方案,催化剂首层入口截面烟气流速偏差系数Cx从18.13%降至12.38%。烟气中飞灰颗粒在反应器首层催化剂入口断面上呈现分布不均匀分布的特性,弯道C处无导流板时,截面中间区域的粉尘浓度一般在0.035 kg·m-3,最高值可达0.068 kg·m-3,弯道C加装导流板后首层催化剂入口烟道断面飞灰浓度不均匀偏差系数值由原有结构的34.21%降为26.18%,表明导流板结构有助于飞灰浓度均匀性分布。数值计算模型符合工程实际,具有很好的可靠性和实用性。     

广州市酸沉降对材料破坏的经济损失估算

大气中的酸性物质对材料的破坏是酸沉降经济损失中的重要部分。简要说明了材料损失的计算方法,并以2001年为基准年,选择了广州市作为代表性城市,运用材料损伤函数和材料使用寿命公式对建筑材料及自行车的经济损失进行了估算,使酸沉降的破坏作用达到定量化。     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

三重属性的承载力约束下中国水资源利用效率动态演进特征分析

基于水资源资源禀赋-社会经济-生态环境三重属性约束建立承载力测算模型,创新性地将水资源承载力作为投入要素,构建SFA效率测算模型,运用2003～2017年中国31个省份面板数据,应用Kernel密度估计和Markov链对水资源使用效率的动态演进特征进行分析.结果表明:①中国大部分省份水资源承载力在稳步提升,西北、华...