公路交通噪声防治措施

随着交通运输业的发展及公路等级的不断提高,公路交通噪声越来越引起人们的关注,因此,解决公路交通噪声污染成为一个急待解决的问题,本文论述公路交通噪声造成的危害,并有针对性地提出降低公路交通噪声防治措施。     

杭州市空气微生物群落碳代谢特征研究

利用Biolog技术,研究了杭州市4个样点,即延安路商业街(Yan’an Road Business Street,YRBS)、天目山路与教工路口(Tianmushan Jiaogong Cross Road,TJCR)、浙江工商大学教工路校区(Zhejiang Gongshang University Jiaogong Campus,ZJGUSJC)、西湖曲院风荷(Breeze-ruffled Lotus at Quyuan Garden,BLQG)空气微生物群落碳代谢特征.结果表明,不同样点空气微生物样品平均颜色变化率(Average Well Color Development,AWCD)在培养240 h后达到稳定,并且4个样点的AWCD值即对单一碳源的利用能力具有显著差异,YRBS>TJCR≈ZJGSUJC>BLQG;YRBS、TJCR、ZJGSUJC和BLQG空气中微生物物种的多样性和丰富度依次减少;不同样点空气微生物对糖类和氨基酸类碳源利用程度较高,对其它碳源利用程度较低,且同一样点对不同单一碳源的利用程度也存在显著差异,YRBS对糖类碳源的利用程度最高,对聚合物类碳源利用程度最低,BLQG对糖类碳源的利用程度最高,对胺类碳源利用程度最低;不同样点空气微生物群落碳代谢基质主成分1(PC1)贡献度为43.8%,主成分2(PC2)贡献度23.4%,YRBS、BLQG和TJCR的空气微生物群落差异较大,碳代谢功能差异显著,而TJCR与ZJGSUJC碳代谢功能无显著差异.     

空调病房真菌气溶胶浓度及粒径分布特征

医院室内空气真菌污染会影响医护人员、病人及陪护人员的健康,其影响程度不仅与空气真菌的种类和浓度有关,还与真菌气溶胶粒径及分布特征有关,不同粒径的真菌气溶胶影响人体健康的作用机制不同.本研究对重庆某综合医院的普通病房进行空气真菌取样,系统分析了病房空气真菌浓度、种属及粒径分布特征.通过分析实验数据,发现病房空气真菌浓度与病人患病类型及人员密度无关,主要影响因素为温湿度与季节变化.冬夏各科室病房真菌粒径分布特征大致呈正态分布,粒径的百分比从Ⅰ级~Ⅲ级各级所占比例逐渐增大,Ⅲ级~Ⅴ级所占比例总体最大,Ⅴ级~Ⅵ级所占比例逐渐降低.冬夏不同科室病房的空气真菌孢子中值直径没有显著差异,真菌孢子的中值直径小于3.19μm.病房冬夏优势菌属基本相同,主要为青霉属、曲霉属及交链孢霉属,与其它建筑相比并无显著性差异.因此,病房空调系统设计应提高对粒径为1.1~4.7μm真菌孢子的过滤效率,病房的日常卫生维护与空调系统运行管理时应有针对性地选择适宜的抑菌除菌方法和设备.     

空分站大型空压机组的噪声治理

介绍了采用局部敞开式隔声罩隔音降噪技术治理空分站大型空压机组噪声的治理方案及取得的效果.     

The Application of Chemical Leasing Business Models in Mexico

- DOI: http://dx.doi.org/10.1065/espr2006.02.294 Background, Aim and Scope. To better address the requirements of the changing multilateral order, the United Nations Industrial Development Organization (UNIDO) Cleaner Production Programme, in 2004, developed the new Sustainable Industrial Resource Management (SIRM) approach. This approach is in accordance with the principles decided at the United Nations Conference on Environment and Development (UNCED) in Rio de Janeiro, Brazil in 1992. Unlike the traditional approaches to environmental management, the SIRM concept captures the idea of achieving sustainable industrial development through the implementation of circular material and energy flows in the entire production chain and reduction of the amount of material and energy used with greater efficiency solutions. The SIRM approach seeks to develop new models to encourage a shift from selling products to supplying services, modifying, in this manner, the supplier/user relationship and resulting in a win-win situation for the economy and the environment. Chemical Leasing represents such a new service-oriented business model and is currently being promoted by UNIDO′s Cleaner Production Programme. Main Features. One of the potential approaches to address the problems related to ineffective use and over-consumption of chemicals is the development and implementation of Chemical Leasing business models. These provide concrete solutions to the effective management of chemicals and on the ways negative releases to the environment can be reduced. The Chemical Leasing approach is a strategy that addresses the obligations of the changing international chemicals policy by focusing on a more service-oriented strategy. Mexico is one of the countries that were selected for the implementation of UNIDO's demonstration project to promote Chemical Leasing models in the country. The target sector of this project is the chemical industry, which is expected to shift their traditional business concept towards a more service and value-added approach. This is being achieved through the development of company specific business models that implement the above-indicated Chemical Leasing concept with the support from the Mexican National Cleaner Production Centre (NCPC). Results and Conclusions. The implementation of Chemical Leasing in Mexico has proven to be an efficient instrument in enhancing sustainable chemical management and significantly reducing emissions in Mexico. Several companies from the chemical industrial sector implement or agreed to implement chemical leasing business models. Based on the positive findings of the project, several Mexican companies started to negotiate contents of possible Chemical Leasing contracts with suitable business partners. The project further aimed at disseminating information on Chemical Leasing. It successfully attracted globally operating companies in the chemicals sector to explore possibilities to implement Chemical Leasing business models in Mexico. At the international level, the results of the UNIDO project were presented on 20TH September 2005 during a side event of the Strategic Approach to International Chemicals Management (SAICM) Preparation Conference in Vienna. Recommendations and Outlook. To facilitate the promotion and application of Chemical Leasing project at international level, UNIDO is currently developing a number of tools to standardize Chemical Leasing projects. These include, among others, Chemical leasing contract models; Chemical Leasing data base to find partners for chemical leasing; and guidelines to implement Chemical Leasing projects and work programmes.     

Mitigation of CO2 Emissions from the EU-15 Building Stock. Beyond the EU Directive on the Energy Performance of Buildings (9 pp)

-

Goal Scope and Background. The European Directive on Energy Performance of Buildings which came into force 16 December 2002 will be implemented in the legislation of Member States by 4 January 2006. In addition to the aim of improving the overall energy efficiency of new buildings, large existing buildings will become a target for improvement, as soon as they undergo significant renovation. The building sector is responsible for about 40% of Europe's total end energy consumption and hence this Directive is an important step for the European Union in order that it should reach the level of saving required by the Kyoto Agreement. In this the EU is committed to reduce CO2 emissions relative to the base year of 1990 by 8 per cent, by 2010. But what will be the impact of the new Directive, how large could be the impacts of extending the obligation for energy efficiency retrofitting towards smaller buildings? Can improvement of the insulation offset or reduce the growing energy consumption from the increasing installation of cooling installations? EURIMA, the European Insulation Manufacturers Association and EuroACE, the European Alliance of Companies for Energy Efficiency in Buildings, asked Ecofys to address these questions.

Methods

The effect of the EPB Directive on the emissions associated with the heating energy consumption of the total EU 15 building stock has been examined in a model calculation, using the Built Environment Analysis Model (BEAM), which was developed by Ecofys to investigate energy saving measures in the building stock. The great complexity of the EU-15 building stock had to be simplified by examining five standard buildings with eight insulation standards, which are assigned to building age and renovation status. Furthermore, three climatic regions (cold, moderate, warm) were distinguished for the calculation of the heating energy demand. This gave a basic 210 building types for which the heating energy demand and CO2 emissions from heating were calculated according to the principles of the European Norm EN 832.

Results and Discussion

The model calculations demonstrates that the main contributor to the total heating related CO2 emissions of 725 Mt/a from the EU building stock in 2002 is the residential sector (77%) while the remaining 23% originates from non-residential buildings. In the residential sector, single-family houses represent the largest group responsible for 60% of the total CO2 emissions equivalent to 435 Mt/a.

-

- The technical potential: If all retrofit measures in the scope of the Directive were realised immediately for the complete residential and non-residential building stock the overall CO2 emission savings would add up to 82 Mt/a. An additional saving potential compared to the Directive of 69 Mt/a would be created if the scope of the Directive was extended to cover retrofit measures in multi-family dwellings (200-1000m2) and non-residential buildings smaller than 1000m2 used floor space. In addition including the large group of single-family dwellings would lead to a potential for additional CO2 emission reductions compared to the Directive of 316 Mt/a.

-

- Temporal mobilization of the potential: Calculations based on the building stock as it develops over time with average retrofit rates demonstrated that regulations introduced following the EPB Directive result in a CO2 emissions decrease of 34 Mt/a by the year 2010 compared to the business as usual scenario. Extending the scope of the EPB Directive to all residential buildings (including single and multi-family dwellings), the CO2 emission savings potential over the 'business as usual' scenario could be doubled to 69 Mt/a in the year 2010. This creates an additional saving potential compared to the Directive of 36 Mt/a.

-

- Cooling demand: The analysis demonstrated that in warm climatic zones the cooling demand can be reduced drastically by a combination of lowering the internal heat loads and by improved insulation. With the reduction of the heat loads to a moderate level the cooling demand, e.g. of a terraced house located in Madrid, can be reduced by an additional 85% if the insulation level is improved appropriately.

Conclusions

This study demonstrates that the European Directive on Energy Performance of Buildings will have a significant impact on the CO2 emissions of the European building stock. The main saving potential lies in insulation of the existing building stock. Beyond this, CO2 emissions could, however, be greatly reduced if the scope of the Directive were to be extended to include retrofit of smaller buildings.

Recommendation and Perspective

The reductions should be seen in relation to the remaining gap of 190 Mt CO2 eq. per annum between the current emission levels of EU-15 and the target under the Kyoto-Protocol for the year 2010. The energy and industrial sector will probably contribute only a fraction of this reduction via the newly established EU emissions trading scheme and connected projects under the flexible mechanism. In addition, the traffic sector is likely to continue its growth path leading to a widening of the gap. Thus, there is likely to be considerable pressure on the EU building sector to contribute to the EU climate targets beyond what will be achieved by means of the current EPB Directive. Legislators on the EU and national level are therefore advised to take accelerated actions to tap the very significant emission reduction potentials available in the EU building stock.     

试论东汉以后黄河下游长期安流之原因

认为东汉王景治河后500多年黄河下游决溢次数、规模均逊于西汉时期及唐以后各代,主河道变迁亦少,可谓相对安流。其原因在于王景能根据河流规律,因势利导,扩大了黄河行洪能力,巩固了河堤,河道较为顺直;在王景之后,政府的治河机构进一步加强,巩固河堤的工作得以继续进行;相对西汉时期,这一时期气候寒冷,黄河年径流量大为减少,消弱了致灾因子;黄河中游地区植被得到一定程度的恢复。     

白炭黑生产中干燥系统的噪声控制

对ＲＨＯＮＥ－ＰＯＵＬＥＮＣ白炭黑公司的干燥系统进行了噪声综合治理。主要措施有：大型引风机隔声罩、引风机排气筒消声塔,加热炉和鼓风机隔声机房,雾化加速器活动隔声罩,管道隔声包扎等。治理后厂界噪声由７４ｄＢ（Ａ）降至４５ｄＢ（Ａ）。     

浅谈抗干扰技术在生产中的应用

通过分析工业生产中干扰的原因，找出了几种可行的解决办法，使测控系统工作可靠、安全，保证产品质量。     

矿山巷道三种机械局部通风方式的评价

在矿山巷道的掘进作业及隧道的导洞开挖等工程中，常采用局部机械通风，常见的通风方式有抽出式、压入式和混合式。这3种通风方式各有其特点，但从降低作业面粉尘浓度的角度尚未定量计算分析，在建立通风模型的基础上进行了数学分析，为选择合理的通风方式，确定合理通风量来确保工作面区域粉尘浓度达标，提供了理论论据。