基于事故逆向再现的车辆追尾事故仿真分析研究

为认定车辆碰撞事故的性质及责任,动态还原事故发生过程。提出1种逆向事故分析再现方法,经过坐标系旋转后构建确定方程组的车辆碰撞瞬间解析计算模型,并经过实车碰撞实验数据验证其计算精度与三维再现的准确性。利用Crashview软件对1起车辆追尾事故进行仿真分析,解析计算得出车辆碰撞瞬间车速和碰撞前行驶车速,实现事故二维过程重构和三维模拟再现。结果表明:计算分析车速与VDR记录车速误差在5%以内,模拟再现轨迹与事故现场实测痕迹基本吻合,所构建的方法可有效用于车辆追尾碰撞事故辅助分析鉴定,为事故过程分析提供理论依据。     

基于蒙特卡洛模拟的多米诺事故风险量化管理*

为降低危化品相关的化工事故造成的人员伤亡和财产损失,以化工多米诺事故为研究对象,探讨由初始事故引发1个或多个次生事故的连锁反应机理与风险评估方法。提出应用蒙特卡洛模拟对多米诺事故风险进行动态量化的方法,梳理化工多米诺事故风险的识别、分析、评定、处理全周期管理流程,并以1个天然气压气站为案例,验证基于蒙卡模拟的化工多米诺事故风险量化方法的有效性。结果表明:该方法可以更准确地对化工多米诺事故风险进行定量评估。多米诺事故风险全周期管理流程的梳理能够有效指导化工企业开展安全管理、事故预防等工作。     

A Bayesian network-based approach for the assessment and management of ageing in major hazard establishments

Currently, there is an increasing attention towards ageing of industrial equipment, as the phenomenon has been recognised as a cause of severe accidents, recorded in the last years in many process establishments. Recent studies described ageing through a number of key-factors affecting the phenomenon by accelerating or slowing it down. The Italian Competent Authority for the prevention of chemical accidents (Seveso III Directive) adopted a short-cut method, accounting for the assessment of these factors, to evaluate the adequateness of ageing management during inspections at Seveso sites. In this paper, a Bayesian Network was developed, by using the data gathered during the first application of the short-cut method, with the aim to verify the robustness of the approach for ageing assessment and the validity of the a priori assumptions used in assessing the key-factors. The structure of the Bayesian network was established by using experts’ knowledge, whereas the Counting Learning algorithm was adopted to execute the parameter learning by means of the software Netica. The results showed that this network could effectively explore the complex logical and uncertain relationships amongst factors affecting equipment ageing. Results of the present study were exploited to improve the short-cut method.     

基于模糊推理的FRAM事故定量分析方法研究

为有效克服FRAM事故分析中无法进行定量分析的缺陷,提出结合模糊推理技术的Fuzzy FRAM模型。此改进模型基于FRAM识别系统运行状态;依据功能输出要素的时间/精度属性利用Matlab构建2阶模糊推理系统量化功能输出质量;根据通用性能条件(CPC)及功能输入耦合端口构建功能评价体系,针对评价体系中存在的不确定性信息融合及建模问题,采用模糊证据推理技术,通过模糊信度结构建立、数据处理、信息融合测度后获得功能的风险指数;以既有铁路危险品运输事故为例,验证方法的可行性。结果表明:Fuzzy FRAM模型的评估结果较为精确,是FRAM分析方法的有效补充。     

Prevalence of alcohol among nonfatally injured road accident casualties in two level III trauma centers in northern Ghana

Background: Alcohol use is pervasive among motorists on the road in Ghana; however, we do not know the extent to which this behavior is implicated in road accidents in this country.

Objectives: The main objective of this research was to establish the prevalence of alcohol in the blood of nonfatally injured casualties in the emergency departments (EDs) in northern Ghana.

Method: Participants were injured road traffic crash victims, namely, pedestrians, cyclists, motorcyclists, and drivers seeking treatment at an ED. The study sites were 2 level III trauma centers located in Wa and Bolgatanga. Participants were screened for alcohol followed by breath tests for positive participants using breathalyzers.

Results: Two hundred and sixty-two accident victims visited EDs, 58% of whom were in Wa. Among the victims, 41% were hospitalized and 57% experienced slight injuries. The vast majority (76%) of the casualties were motorcyclists, 13% were pedestrians, 8% were cyclists, and 2% were drivers. Casualties who had detectable alcohol in their blood were predominantly vulnerable road users. In all, 34% of participants had detectable blood alcohol concentrations (BACs) and the mean BAC for all casualties who tested positive and could give definitive BACs was 0.2265 (226 mg/dl). The prevalence of alcohol use was 53% among cyclists, 34% among motorcyclists, 21% among pedestrians, and 17% among drivers. Male casualties were more likely to test positive for alcohol than females. In addition, the prevalence of alcohol was significantly higher among injured casualties in Bolgatanga compared to Wa.

Conclusion: There was a high prevalence of alcohol use among nonfatally injured casualties in northern Ghana and injury severity increased with BAC. AUDIT screening in the hospital, alcohol consumption guideline, road safety education with an emphasis on minimizing or eliminating alcohol consumption, and enhanced enforcement of the BAC limit among motorists are recommended.     

Features of fatal injuries in older cyclists in vehicle–bicycle accidents in Japan

Objective: The purpose of this study was to identify and better understand the features of fatal injuries in cyclists aged 75 years and over involved in collisions with either hood- or van-type vehicles.

Methods: This study investigated the fatal injuries of cyclists aged 75 years old and over by analyzing accident data. We focused on the body regions to which the fatal injury occurred using vehicle–bicycle accident data from the Institute for Traffic Accident Research and Data Analysis (ITARDA) in Japan. Using data from 2009 to 2013, we examined the frequency of fatally injured body region by gender, age, and actual vehicle travel speed. We investigated any significant differences in distributions of fatal injuries by body region for cyclists aged 75 years and over using chi-square tests to compare with cyclists in other age groups. We also investigated the cause of fatal head injuries, such as impact with a road surface or vehicle.

Results: The results indicated that head injuries were the most common cause of fatalities among the study group. At low vehicle travel speeds for both hood- and van-type vehicles, fatalities were most likely to be the result of head impacts against the road surface.

The percentage of fatalities following hip injuries was significantly higher for cyclists aged 75 years and over than for those aged 65–74 or 13–59 in impacts with hood-type vehicles. It was also higher for women than men in the over-75 age group in impacts with these vehicles.

Conclusions: For cyclists aged 75 years and over, wearing a helmet may be helpful to prevent head injuries in vehicle-to-cyclist accidents. It may also be helpful to introduce some safety measures to prevent hip injuries, given the higher level of fatalities following hip injury among all cyclists aged 75 and over, particularly women.     

A path analysis model for explaining unsafe behavior in workplaces: the effect of perceived work pressure

Background. Unsafe behavior is closely related to occupational accidents. Work pressure is one the main factors affecting employees’ behavior. The aim of the present study was to provide a path analysis model for explaining how work pressure affects safety behavior. Methods. Using a self-administered questionnaire, six variables supposed to affect safety employees’ behavior were measured. The path analysis model was constructed based on several hypotheses. The goodness of fit of the model was assessed using both absolute and comparative fit indices. Results. Work pressure was determined not to influence safety behavior directly. However, it negatively influenced other variables. Group attitude and personal attitude toward safety were the main factors mediating the effect of work pressure on safety behavior. Among the variables investigated in the present study, group attitude, personal attitude and work pressure had the strongest effects on safety behavior. Conclusion. Managers should consider that in order to improve employees’ safety behavior, work pressure should be reduced to a reasonable level, and concurrently a supportive environment, which ensures a positive group attitude toward safety, should be provided. Replication of the study is recommended.     

Safe speed limits for a safe system: The relationship between speed limit and fatal crash rate for different crash types

Objective: The objective of this article is to provide empirical evidence for safe speed limits that will meet the objectives of the Safe System by examining the relationship between speed limit and injury severity for different crash types, using police-reported crash data.

Method: Police-reported crashes from 2 Australian jurisdictions were used to calculate a fatal crash rate by speed limit and crash type. Example safe speed limits were defined using threshold risk levels.

Results: A positive exponential relationship between speed limit and fatality rate was found. For an example fatality rate threshold of 1 in 100 crashes it was found that safe speed limits are 40 km/h for pedestrian crashes; 50 km/h for head-on crashes; 60 km/h for hit fixed object crashes; 80 km/h for right angle, right turn, and left road/rollover crashes; and 110 km/h or more for rear-end crashes.

Conclusions: The positive exponential relationship between speed limit and fatal crash rate is consistent with prior research into speed and crash risk. The results indicate that speed zones of 100 km/h or more only meet the objectives of the Safe System, with regard to fatal crashes, where all crash types except rear-end crashes are exceedingly rare, such as on a high standard restricted access highway with a safe roadside design.     

Injury risk functions for frontal oblique collisions

Objective: The objective of this article was the construction of injury risk functions (IRFs) for front row occupants in oblique frontal crashes and a comparison to IRF of nonoblique frontal crashes from the same data set.

Method: Crashes of modern vehicles from GIDAS (German In-Depth Accident Study) were used as the basis for the construction of a logistic injury risk model. Static deformation, measured via displaced voxels on the postcrash vehicles, was used to calculate the energy dissipated in the crash. This measure of accident severity was termed objective equivalent speed (oEES) because it does not depend on the accident reconstruction and thus eliminates reconstruction biases like impact direction and vehicle model year. Imputation from property damage cases was used to describe underrepresented low-severity crashes―a known shortcoming of GIDAS. Binary logistic regression was used to relate the stimuli (oEES) to the binary outcome variable (injured or not injured).

Results: IRFs for the oblique frontal impact and nonoblique frontal impact were computed for the Maximum Abbreviated Injury Scale (MAIS) 2+ and 3+ levels for adults (18–64 years). For a given stimulus, the probability of injury for a belted driver was higher in oblique crashes than in nonoblique frontal crashes. For the 25% injury risk at MAIS 2+ level, the corresponding stimulus for oblique crashes was 40 km/h but it was 64 km/h for nonoblique frontal crashes.

Conclusions: The risk of obtaining MAIS 2+ injuries is significantly higher in oblique crashes than in nonoblique crashes. In the real world, most MAIS 2+ injuries occur in an oEES range from 30 to 60 km/h.     

电气伤亡事故的主客体场景指标设计及统计规律

为合理预防控制电气伤亡事故的发生提供依据,通过检索查阅国内外相关文献和政府网站公布的电气伤亡事故和案例情况描述,选取105起典型电气伤亡事故案例进行统计与分析;针对电气伤亡事故涉及的主客体场景要素,对其进行筛选、分类、排序及指标设计,形成系统的电气伤亡事故指标体系;结合现实情况对统计结果进行原因分析,根据统计结果,得到电气伤亡事故发生的一般规律,据此提出安全管理中需要关注与重视之处,以此来预防电气伤亡事故的发生。