Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Effect of Cell-to-matrix Ratio in Polyvinyl Alcohol Immobilized Pure and Mixed Cultures on Atrazine Degradation

Atrazine biodegradation by immobilized pure and mixed cultures was examined. A pure atrazine-degrading culture, Agrobacterium radiobacter J14a (J14a), and a mixed culture (MC), isolated from an atrazine-contaminated crop field, were immobilized using phosphorylated-polyvinyl alcohol (PPVA). An existing cell immobilization procedure was modified to enhance PPVA matrix stability. The results showed that the matrices remained mechanically and chemically stable after shaking with glass beads over 15 days under various salt solutions and pH values. The immobilization process had a slight effect on cell viability. With the aid of scanning electron microscopy, a suitable microstructure of PPVA matrices for cell entrapment was observed. There were two porous layers of spherical gel matrices, the outside having an encapsulation property and the inside containing numerous pores for bacteria to occupy. J14a and MC were immobilized at three cell-to-matrix ratios of 3.5, 6.7, and 20 mg dry cells/mL matrix. The atrazine biodegradation tests were conducted in an aerobic batch system, which was inoculated with cells at 2,000 mg/L. The tests were also conducted using free (non-immobilized) J14a and MC for comparative purpose. The cell-to-matrix ratio of 3.5 mg/mL provided the highest atrazine removal efficiency of 40–50% in 120 h for both J14a and MC. The free cell systems, for both cultures, presented much lower atrazine removal efficiencies compared to the immobilized cell systems at the same level of inoculation.     

CN-测定中显色剂配制方法的选择与保存时间

对2种氰化物显色剂配制方法进行了对比,发现用无水乙醇配制的显色剂具有方便,经济,实用,无毒且显色剂保存期长等优势。     

退浆废水中聚乙烯醇的分析检测研究

建立了紫外可见分光光度法检测退浆废水中聚乙烯醇(PVA)含量的方法。以硼酸为介质,碘化钾—碘溶液为显色剂,检测波长为680 nm,测定退浆废水中PVA含量的线性方程为Y=0.018 8X+0.003 2,相关系数R2=0.999 3,平均加标回收率为97.6%;方法精密度(RSD=1.5%)、重现性(RSD=1.8%)均较好。该方法操作简单、准确度高、测定快速,适用于测定退浆废水中PVA的含量。     

Volatile halogenated organics in swimming pools

This survey undertaken in Greece (Mytilene town) has shown that Volatile halogenated organics (VHO) are present in swimming pool water. Analysis was performed by purge‐and‐trap (PAT) gas chromatographic (GC) technique and samples from two public indoor swimming pools in Mytilene were analyzed for VHO. Water samples were collected every week for a period of three months, and have shown the occurrence of chloroform, dichlorobromomethane, chlorodi‐bromomethane, bromoform (all four are trihalomethanes [THMs]), as a result of the chlorination and the occurrence of tetrachloroethylene and 1,1,1,2‐tetrachloroethane is assigned to their introduction as impurities during the process treatment of water. The levels of concentrations ranged from 4.0 to 26.0 μg/1 for chloroform, from 0.26 to 7.0 μg/1 for dichlorobromomethane, from 0.5 to 3.0 μg/1 for chlorodibromomethane, from 0.07 to 0.9 μg/1 for bromoform, from no detectable levels to 0.07 μg/1 for tetrachloroethylene and from no detectable levels to 0.2 μg/1 for 1,1,1,2‐tetrachloroethane.     

Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.     

Contamination of Oxygen-Consuming Organics in the Yellow River of China

Contamination of oxygen-consuming organics (OCOs) was one of the most serious problems in the Yellow River of China. This study was conducted to analyze monitoring of the data on OCOs contamination for the river in 1980 and during 1992–1999 as well as examining the effect of suspended solids (SS) on chemical oxygen demand (COD_Mn) and biochemical oxygen demand (BOD₅) of river water. Several significant results have arisen from the study. First, COD_Mn and BOD₅ of the river water showed an increasing trend from the upper to the lower reaches of the mainstream. BOD₅ values of river water in 1992 were significantly higher than those in 1980 and showed an increasing trend during 1992–1999. Second, OCOs in river water of the mainstream was attributed mainly to point sources; the ratio of point to non-point sources of BOD₅ was about 2.81. The load from point sources showed an increasing trend during 1992–1998. In contrast, the load from non-point sources manifested a decreasing trend during this period; this was caused by the decreasing trend of SS content in river water. The total load of BOD₅ from point and non-point sources displayed an increasing trend during 1992–1998. Third, as the humic substances in SS can hardly be biologically oxidized in natural conditions but can be oxidized by chemical oxidants such as potassium permanganate, COD_Mn was not suitable for being regarded as a parameter reflecting the pollution degree of OCOs in river water with a high SS content.     

酒精在常见可燃地面材料燃烧痕迹特征规律研究

易燃液体燃烧痕迹识别对助燃剂放火火灾调查至关重要。选用丙纶地毯和PVC地板革作为纤维和塑料地板的代表,以工业酒精作为易挥发助燃剂的代表,研究酒精用量、灭火方式等对燃烧痕迹形成及痕迹稳定性的影响。通过与未加载酒精的痕迹对比,发现丙纶地毯因热稳定性较差,燃烧后往往能形成烧坑或烧洞,其燃烧轮廓以典型的灰化形式存在,加载酒精的部位熔融严重,与地面紧紧粘连在一起;PVC地板革因为表面光滑,酒精在其表面不断流淌,燃烧后会留下清晰的轮廓,类似于细线状的印痕,而地板革本身基本不会燃烧。燃烧熄灭的方式也会对其炭化程度、燃烧图痕、残余形状产生影响。     

Auto-adaptive Air Distribution and Structure Optimization of Ejector Burner for Biomass Alcohol Fuels

A plenty of studies on the utilization of biomass alcohol fuels have been conducted, but combustion efficiency and stability of this fuels still need to be improved. Based on biomass alcohol fuels (bio-methanol and bio-ethanol), this paper studied auto-adaptive air distribution characteristics and optimum structure parameters of an ejector burner by numerical simulation method. Also, an experiment was conducted to verify the numerical results. The results show that the mole air entrainment ratio (MAER) keeps almost constant when the ejector fuel nozzle exit locates at the segment between the ejector throat and the suction chamber entrance, but a bigger ratio α would lead to a higher MAER till the α is bigger than 8.5 for bio-methanol and 11.5 for bio-ethanol. The bio-ethanol fuel is more beneficial for air carrying role because of its big molecular weight. Operation pressure (P_w) has a little impact on MAER of the two fuels, but the rise of back pressure (P_b) would lead to rapid decrease of MAER for the two fuels. For the optimum structure burners, the MAER can be maintained at the value of theoretical complete combustion. Its changing rate is less than 2.3% for bio-methanol and 2.5% for bio-ethanol when the burner load changes from 30% to 120%, which is highly consistent with the experimental results. The optimum burner can distribute air supply automatically with the changing of burner load.     

Concurrent Chemical and Histological Analyses: Are They Compatible?

Bivalves are often used as sentinel organisms in monitoring programmes for trace organic contaminants. the animal's physiological state may be important in interpreting trends in contaminant body burden. Simultaneous evaluation of physiological state and organic contaminant concentration in bivalves typically involves removal of a lipid-rich cross-section of the body mass for histopathological and/or gonadal analysis.

In this study, the bias introduced by this technique in the final trace organic concentrations, e.g. of polynuclear aromatic hydrocarbons, chlorinated pesticides and polychlorinated biphenyls, are evaluated on five different size groups of oysters. As a test case, we evaluated the use of this method in the NOAA's Status & Trends Mussel Watch (NS&T) Programme. the average biases introduced by this technique in the final trace organic concentrations in Gulf of Mexico oysters have been increasing since 1986 as a consequence of a continuous decrease in the size of the individuals sampled.