臭氧氧化法降解聚氯乙烯离心母液废水中3种有机物

以聚氯乙烯离心母液废水中含量较高的3种有机物(聚乙烯醇、异辛醇和α-甲基苯乙烯)作为目标物,考察臭氧氧化工艺对3种有机物的去除效果,同时考察反应时间、臭氧投加量和初始pH对处理效果的影响。实验结果表明,臭氧氧化处理3种废水的最佳反应时间和臭氧投加量分别为:聚乙烯醇25 min,136 mg/L;异辛醇60min,312 mg/L;α-甲基苯乙烯60 min,32 mg/L。在此条件下,3种有机物的去除率分别为98%、85%和95%。此外,碱性条件有助于臭氧氧化工艺对3种有机物的降解。产物分析结果表明,经臭氧氧化,聚乙烯醇断链后进一步反应生成了草酸单乙酯,异辛醇和α-甲基苯乙烯分别生成了和苯乙酮。     

氧活性粒子氧化NO生成HNO_3

采用强电离介质阻挡放电方法制取高浓度氧活性粒子(O+2、O3)并注入气体外排烟道中,实现O+2、O3氧化NO转化成资源酸(HNO3)的等离子化学反应。描述强电离放电的氧活性粒子产生器,讨论烟道中O+2、O3氧化NO成HNO3等离子体反应机制,分析回收酸液的NO-2、NO-3离子种类及浓度。考察强电离放电等离子体源的输入功率、水体积百分比、气体温度、气体流速对NOx氧化率的影响。氧化率为97.2%的最佳实验条件是:O+2浓度为1.38×1010个/cm3,O3浓度为210 mg/L,烟气温度为65℃,H2O体积浓度为5.6%,停留时间为0.94 s。     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

Effect of Isoflavones on Reproductive Performance,Testosterone Levels,Lipid Peroxidation,and Seminal Plasma Biochemistry of Male Rabbits

Abstract

The objective of this study was to determine the effect of either 2.5 mg/kg Body Weight or 5 mg/kg Body Weight (BW) doses of isoflavones on semen quality, testosterone levels, lipid peroxidation and semen biochemistry of male New Zealand White rabbits. Animals were given both 2.5 mg/kg BW and 5 mg/kg BW doses of isoflavones. The tested doses were given to rabbits orally every other day for 13 weeks. Treatment with isoflavones caused an increase (p < 0.05) in libido (by decreasing the reaction time), sperm concentration, sperm motility (%), total motile sperm per ejaculate (TMS), packed sperm volume (PSV), total functional sperm fraction (TFSF), total sperm output, initial fructose concentration and normal sperm, while dead sperm was reduced compared to control animals. On the other hand, ejaculate volume, initial hydrogen ion concentration (pH) and plasma testosterone levels did not change in treated animals with both doses of isoflavones as compared to control. Concentrations of thiobarbituric acid-reactive substances (TBARS), total lipids, and low density lipoprotein were significantly (p < 0.05) reduced in seminal plasma of rabbits treated with either 2.5 mg/kg BW or 5 mg/kg BW doses of isoflavones. While, the activities of glutathione S-transferase (GST), lactate dehydrogenase (LDH), aspartate aminotransferase (AST), alanine aminotransferase (ALT), acid phosphatase (AcP), and alkaline phosphatase (AlP) were significantly (p < 0.05) increased in seminal plasma of treated animals. Also, total cholesterol, percentage cholesterol (out of total lipids), and high density lipoprotein were significantly (p < 0.05) increased, while triglyceride did not change in seminal plasma of treated animals. Supplementation at either level of isoflavones did not cause changes in live body weight (LBW), dry matter intake (DMI), and relative weights of testes and epididymis. The present results showed that either 2.5 mg/kg BW or 5 mg/kg BW doses of isoflavones caused an improvement of some semen characteristics and did not have negative effects on male fertility.     

Principle and applications of microbubble and nanobubble technology for water treatment

In recent years, microbubble and nanobubble technologies have drawn great attention due to their wide applications in many fields of science and technology, such as water treatment, biomedical engineering, and nanomaterials. In this paper, we discuss the physics, methods of generation of microbubbles (MBs) and nanobubbles (NBs), while production of free radicals from MBs and NBs are reviewed with the focuses on degradation of toxic compounds, water disinfection, and cleaning/defouling of solid surfaces including membrane. Due to their ability to produce free radicals, it can be expected that the future prospects of MBs and NBs will be immense and yet more to be explored.     

Phenol depletion by thermally activated peroxydisulfate at 70°C

The ability of thermal activated peroxydisulfate (PS) of mineralizing phenol at 70 °C from contaminated waters is investigated. Phenol in concentrations of 10⁻⁴ to 5 × 10⁻⁴ M is quantitatively depleted by 5 × 10⁻³ to 10⁻² M activated PS in 15 min of reaction. However, mineralization of the organic carbon is not observed. Instead, an insoluble phenol polymer-type product is formed. A reaction mechanism including the formation of phenoxyl radicals and validated by computer simulations is proposed. High molecular weight phenolic products are formed by phenoxyl radical H-abstraction reactions. This is not the case for the room temperature degradation of phenol by sulfate radicals where sulfate addition to the aromatic ring mainly leads to the generation of hydroxycyclohexadienyl radicals leading to hydroxybenzenes and oxidized open chain products. Therefore, a change in the reaction mechanism is observed with increasing temperature, and thermal activation of PS at 70 °C does not lead to the mineralization of phenol. Thus PS activation at 70 °C may be considered a potential method to reduce the load of phenol in polluted waters by polymerization.     

Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.     

酒精在常见可燃地面材料燃烧痕迹特征规律研究

易燃液体燃烧痕迹识别对助燃剂放火火灾调查至关重要。选用丙纶地毯和PVC地板革作为纤维和塑料地板的代表,以工业酒精作为易挥发助燃剂的代表,研究酒精用量、灭火方式等对燃烧痕迹形成及痕迹稳定性的影响。通过与未加载酒精的痕迹对比,发现丙纶地毯因热稳定性较差,燃烧后往往能形成烧坑或烧洞,其燃烧轮廓以典型的灰化形式存在,加载酒精的部位熔融严重,与地面紧紧粘连在一起;PVC地板革因为表面光滑,酒精在其表面不断流淌,燃烧后会留下清晰的轮廓,类似于细线状的印痕,而地板革本身基本不会燃烧。燃烧熄灭的方式也会对其炭化程度、燃烧图痕、残余形状产生影响。     

Auto-adaptive Air Distribution and Structure Optimization of Ejector Burner for Biomass Alcohol Fuels

A plenty of studies on the utilization of biomass alcohol fuels have been conducted, but combustion efficiency and stability of this fuels still need to be improved. Based on biomass alcohol fuels (bio-methanol and bio-ethanol), this paper studied auto-adaptive air distribution characteristics and optimum structure parameters of an ejector burner by numerical simulation method. Also, an experiment was conducted to verify the numerical results. The results show that the mole air entrainment ratio (MAER) keeps almost constant when the ejector fuel nozzle exit locates at the segment between the ejector throat and the suction chamber entrance, but a bigger ratio α would lead to a higher MAER till the α is bigger than 8.5 for bio-methanol and 11.5 for bio-ethanol. The bio-ethanol fuel is more beneficial for air carrying role because of its big molecular weight. Operation pressure (P_w) has a little impact on MAER of the two fuels, but the rise of back pressure (P_b) would lead to rapid decrease of MAER for the two fuels. For the optimum structure burners, the MAER can be maintained at the value of theoretical complete combustion. Its changing rate is less than 2.3% for bio-methanol and 2.5% for bio-ethanol when the burner load changes from 30% to 120%, which is highly consistent with the experimental results. The optimum burner can distribute air supply automatically with the changing of burner load.     

顶空气相色谱法测定工业废水中乙醇和异丙醇研究

建立了测定工业废水中乙醇和异丙醇的顶空毛细管气相色谱法.采用顶空进样技术,分析过程不使用有机试剂,避免了对分析人员和环境的危害.乙醇和异丙醇在3.00～ 20.0mg/L浓度范围内呈良好线性关系,水样测定结果重现性较好,相对标准偏差范围均小于2％,乙醇加标回收率为93.6％～104.0％,异丙醇加标回收率为94.0％～ 102.0％.本方法操作简单快速,灵敏度高,能满足工业废水中乙醇和异丙醇的监测.