Fe~0体系降解2,4二氯酚的影响因素及其反应机理

采用铁屑、炉渣及河砂混合介质降解2,4-二氯酚（2,4-DCP）模拟废水,研究铁屑粒径、铁屑投加量、铁屑与炉渣配比、pH值等因素对2,4-DCP脱氯效果的影响,探讨Fe0体系降解2,4-DCP的反应机理。结果表明,铁屑粒径、铁屑投加量、铁屑与炉渣配比、pH对2,4-DCP脱氯效果均有显著影响,在铁屑粒径为2～5 mm、不改变废水pH、铁屑与炉渣质量比为31∶9条件下,Fe0体系对2,4-DCP去除率高达97%。2,4-DCP经脱氯后主要产物为2-氯酚、4-氯酚和苯酚,反应后废水的可生化性明显提高,利于后续的生物处理。     

烧结法提取沸腾炉渣中的铝和铁

近年来,热电厂和钢厂产生了大量的沸腾炉渣.这些炉渣不仅占用了大量的土地,还污染了土壤、地下水和大气.由于该沸腾炉渣中氧化铝的含量很高,因此,评估其氧化铝提取的可利用性是必要的.本文对内蒙古包头钢铁厂的沸腾炉渣进行了粒径分布试验和化学成分分析试验.X-荧光分析显示,该炉渣中SiO2含量为42.60%,Al2O3含量为32.60%,Fe2O3含量为2.43%,CaO含量为2.16%,K2O含量为0.74%,MgO含量为0.44%,Na2O含量为0.16%,TiO2含量为0.88%,还有一些其他痕量元素.将沸腾炉渣和石灰及精煤混合制成小球,然后在约1 000 ℃下烧结.取不同烧结时间的样品,用硫酸浸取,得到含铝离子和铁离子的溶液.试验结果表明,使用浓度为4 mol·L-1的硫酸,在80 ℃下浸取烧结球样品(质量比为50%沸腾炉渣:40%精煤:10%石灰),24 h可以得到铝和铁的最大提取率,分别为86.50%和94.60%.滤渣可以作为固化材料用于高速公路的路基建设或水泥生产中的添加剂.     

页岩-钢渣组合填料湿地强化脱氮除磷研究

以城市污水A/O工艺出水为处理对象,运用页岩和钢渣物化除磷、调控进水碳氮比和氮素氧化性等技术手段,在中试规模上研究了页岩和钢渣组合填料湿地的脱氮除磷效能及影响因素.结果表明,当COD面积负荷率、TN面积负荷率、TP面积负荷率、HRT(水力停留时间)分别为6.5～20.7 g·(m²·d)^-1、2.57～8.22 g·(m²·d)^-1、0.41～1.32 g·(m²·d)^-1、0.5～1.6d时,①氨氮、亚硝态氮和硝态氮的去除率分别为85.8%、56.3%和18.6%,TN去除率为58.0%,TN面积负荷去除率为3.58g·(m²·d)^-1,TN反应动力学常数为0.31 m·d^-1,TN面积负荷去除率随进水TN负荷的增加而线性增加.②TP去除率为90.4%,TP面积负荷去除率为0.89 g·(m²·d)^-1,TP反应动力学常数为0.86 m.d^-1,TP面积负荷去除率随进水TP负荷的增加而线性增加.③水温、HRT、氮素组分、C/N等因素对湿地系统的脱氮除磷效率有显著影响.TN面积负荷去除率随HRT、COD/TN值的增加而幂函数增加.TN面积负荷去除率随水温(、NO₂^--N+NO₃^--N)/TN值的增加而呈指数函数增加.     

循环流化床锅炉脱硫灰熔融固化特性研究

为了解决循环流化床锅炉脱硫灰堆存带来的二次污染问题,同时为了将固硫灰能够资源化利用,采用高温熔融技术对脱硫灰进行熔融固化处理,在对熔渣的物相变化、组成变化、密度、重金属、浸出量等特性进行分析的基础上,还研究了冷却方式对熔渣性质的影响。实验结果表明:经熔融处理后,脱硫灰的体积大幅度减小,有害重金属得到了有效固化,同时不同冷却方式能够得到不同性质的熔渣产品。证明熔融固化技术可以实现循环流化床锅炉脱硫灰的减量化、无害化以及资源化利用。     

铬渣浸溶Cr(Ⅵ)溶解释放规律研究-以锦州堆场铬渣为例

通过锦州地区铬渣样品静态浸溶实验,测定不同固液比、浸出时间、浸取剂pH及组成、振荡速度、铬渣粒度大小、温度等因素对铬渣中Cr(VI)溶解释放的影响,揭示铬渣中Cr(VI)析出、释放机理。结果显示,稀释作用在不同固液比浸出中起主导作用,随固液比的降低,Cr(VI)浸出浓度逐渐降低,但是Cr(VI)浸出总量却在增加;随着浸出时间的增大,浸出Cr(VI)浓度随之增大;铬渣浸出液碱性很高,在铬渣溶解释放过程中,随酸性增强Cr(VI)溶解量相应增大,体现强的酸中和能力;随着振荡速度增加,Cr(VI)溶解释放速度明显加快;粒径越小,铬酸盐的溶解释放速度越快,溶解作用越充分;铬渣的浸出为吸热反应过程,铬渣溶解度随温度升高而增大。铬渣中Cr(Vl)溶解释放速率服从菲克(Fick)扩散定律。研究结果为铬渣危害的评价、监测及铬渣污染有效防治提供参考。     

Synthesis of highly effective absorbents with waste quenching blast furnace slag to remove Methyl Orange from aqueous solution

Water quenching blast furnace slag(WQBFS) is widely produced in the blast furnace iron making process. It is mainly composed of CaO, MgO, Al_2O_3, and SiO_2 with low contents of other metal elements such as Fe, Mn, Ti, K and Na. In this study, WQBFS was treated with grinding, hydrochloric acid acidification, filtration, filtrate extraction by alkali liquor and a hydration reaction. Then BFS micropowder(BFSMP), BFS acidified solid(BFSAS) and BFS acid-alkali precipitate(BFSAP) were obtained, which were characterized by X-ray diffraction, scanning electron microscopy, X-ray fluorescence and Brunauer-Emmet-Teller(BET)specific surface area. The decoloration efficiency for Methyl Orange(MO) was used to evaluate the adsorptive ability of the three absorbents. The effects of adsorptive reaction conditions(p H and temperature of solution, reaction time, sorbent dosage and initial concentration) on MO removal were also investigated in detail. The results indicated that BFSAP performed better in MO removal than the other two absorbents. When the p H value of MO solutions was in the range 3.0–13.0, the degradation efficiency of a solution with initial MO concentration of 25 mg/L reached 99.97% for a reaction time of 25 min at 25°C.The maximum adsorption capacity of BFSAP for MO was 167 mg/g. Based on optimized experiments, the results conformed with the Langmuir adsorption isotherm and pseudo-second-order kinetics. Among inorganic anions, SO_4~(2-)and PO_4~(3-)had significant inhibitory effects on MO removal in BFSAP treatment due to ion-exchange adsorption.     

清淤底泥处置中添加粉煤灰/炉渣对重金属生物有效性及毒性的影响

在清淤底泥中添加碱性粉煤灰、燃煤炉渣进行钝化处理后,通过浸出毒性实验、重金属形态分级实验及植物生长实验对底泥基质中重金属的活性及生物有效性进行了研究.结果表明:清淤底泥中添加粉煤灰、燃煤炉渣等碱性物质后显著降低了底泥基质中可溶态重金属含量,其中,交换态、有机结合态Pb、Zn所占比例显著降低;碱性物质的加入缓解了重金属的浸出危害,钝化底泥基质中粉煤灰、炉渣对Cu的稳定率可达90.34%~96.88%;与此同时也抑制了底泥中重金属在植物体内的富集与迁移,降低了重金属的生物有效性.相关性分析表明,底泥基质中交换态重金属含量、浸出浓度、植物茎叶中重金属含量及植物根伸长抑制率之间存在显著正相关关系(p0.01).     

对硝基苯酚在高炉水淬渣上的吸附机制及表面分形研究

研究了对硝基苯酚(p-NP)在高炉水淬渣(WBFS)上的吸附情况,用电镜扫描(SEM)、X射线衍射仪(XRD)、红外光谱仪(FTIR)、比表面积测定仪(BET)等对高炉水淬渣的理化性质进行了表征.通过批量平衡实验,从动力学和热力学角度探讨了对硝基苯酚在高炉水淬渣上的吸附作用机制.结果表明,吸附等温线能较好地用Freundlich模型来描述.ΔH和ΔS值分别为3.29 k J·mol~(-1)和4.66 J·(mol·K)~(-1),表明对硝基苯酚在高炉水淬渣上的吸附是属于吸热熵增的过程,无化学键等强作用力.ΔG值随着温度的升高而逐渐降低,说明高炉水淬渣对对硝基苯酚吸附的自发性与温度呈正比.高炉水淬渣对对硝基苯酚的吸附可分为快速的表面覆盖和慢速的内部扩散吸附2个过程,整个吸附过程符合伪二级动力学模型.运用Freundlich吸附分形模型计算了不同温度下高炉水淬渣表面的分形维数D分别为2.78、2.80、2.84以及2.87,表明高炉水淬渣的表面确实存在着分形现象,温度越高,D值越大.     

利用磷渣制白炭黑

研究了采用沉淀法由磷渣制白炭黑的工艺条件。在最佳工艺条件下，白炭黑的收率为８３．３％，二氧化硅的质量分数达９４．５％，产品质量符合ＧＢ１０５１７－８９要求。     

Study on the role of copper converter slag in simultaneously removing SO2 and NOx using KMnO4/copper converter slag slurry

To achieve “waste controlled by waste”, a novel wet process using KMnO4/copper converter slag slurry for simultaneously removing SO2 and NOx from acid-making tail gas was proposed. Through the solid-liquid separation for copper slag slurry, the liquid-phase part has a critical influence on removing NOx and SO2. Also, the leached metal ions played a crucial role in the absorption of SO2 and NOx. Subsequently, the effects of single/multi-metal ions on NOx removal was investigated. The results showed that the leached metal from copper converter slag (Al3+, Cu2+, and Mg2+) and KMnO4 had a synergistic effect on NOx removal, thereby improving the NOx removal efficiency. Whereas Fe2+ had an inhibitory effect on the NOx removal owing to the reaction between Fe2+ and KMnO4, thereby consuming the KMnO4. Besides, SO2 was converted to SO42? completely partly due to the liquid catalytic oxidation by metal ions. The XRD and XPS results indicated that the Fe (II) species (Fe2SiO4, Fe3O4) in copper slag can react with H+ ions with the generation of Fe2+, and further consumed the KMnO4, thereby resulting in a decrease in the NOx removal. The characterization of the slags and solutions before and after reaction led us to propose the possible mechanisms. The role of copper slag is as follows: (1) the alkaline substances in copper slag can absorb SO2 and NO2 by KMnO4 oxidation. (2) copper slag may function as a catalyst to accelerate SO2 conversion and improve NOx removal by synergistic effect between leached metal ions and KMnO4.