燃煤火电厂粉尘的危害及防治

系统地分析了火电厂粉尘的来源、性质、危害,并指出必须以粉尘的浓度和粉尘的排放量为标准,采取综合性措施来治理火电厂的粉尘。     

Treatment of anthraquinone dye wastewater by hydrolytic acidification-aerobic process

Experiment on microbial degradation with two kinds of biological process, hydrolytic acidification-aerobic process and aerobic process was conducted to treat the anthraquinone dye wastewater with CODc, concentration of 400 mg/L and chroma 800. The experimental result demonstrated that the hydrolytic-aerobic process could raise the biodegradability of anthraquinone dye wastewater effectively. The effluent CODc, can reach 120-170 mg/L and chroma 150 which is superior to that from simple aerobic process.     

An analysis on spatial variation of urban human thermal comfort in Hangzhou, China

Urban human thermal comfort (UHTC) is affected for interacting of weather condition and underlying surface framework of urban area. Urban underlying surface temperature value and Normalized Difference Vegetation Index(NDVI) were calculated using image interpreting and supervised classification technique by ERDAS IMAGE software using 1991 and 1999 Landsat TM images data. Reference to the relational standard of assessing human thermal comfort and other meteorology data of Hangzhou City in summer, air temperature and relative humidity variation of different land types of underlying surface were inversed. By choosing discomfort index as an indictor, the spatial distribution characteristic and the spatial variation degree of UHTC were estimated and mapped on a middle scale, that is, in six districts of Hangzhou. The main characteristics of UHTC spatial variation from 1991 to 1999 were revealed using a GIS-based calculation model. The variation mechanism were analyzed and discussed from the viewooint of citv olannino, construction and environmental orotection.     

3m直径煤油池火灾火焰特性的数值研究

为了预测油池火灾的火焰特性,采用CFD模拟技术开展静风状态下3 m直径煤油液池的火灾场景模拟,探讨火焰温度、火焰羽流速度、辐射热通量、燃烧产物质量分数等油池火焰特性参数随高度的变化关系;并结合火焰形态分布,提出一种4区域模型,即将湍流扩散火焰划分为油气混合燃烧区、燃烧火焰区、烟尘区和热烟气区来分析燃烧气流在不同高度的实际物理化学特性。此外,通过经验公式和CFD模拟2种方法分别计算出3 m直径煤油池火灾的火焰高度、火焰表面的辐射通量及热辐射破坏半径,并对计算结果进行比较分析,结果表明:2种方法可互相补充完善,有助于池火灾的热辐射危害性评估。     

消防服用织物热防护性能测试分析与研究

热防护性能(Thermal protective performance—TPP)是阻燃型服装或织物隔热防护性能重要指标。本文在已研制的一种模拟人体皮肤及体形的高温"圆筒仪"上进行了改进,并用其测试阻燃服装织物的热防护性能。用膜电偶测量模拟皮肤器表面温升率,并结合烧伤积分模型的评价方法来计算达到二级烧伤的防热时间。与其它一维平面测试装置相比,本装置可较为准确评估实际服装热收缩特征对服装热防护性能的影响。     

煤炭自燃指标性气体确定的实验研究

矿井火灾是矿井五大灾害之一,煤炭自燃则是矿井火灾最主要的起因。为了了解煤炭氧化、自燃规律,本文采用TG-DSC技术研究了不同煤种在水分蒸发、吸氧增重、受热分解及燃烧等不同氧化阶段的氧化特征值;并采用TG-DSC-GC联用技术研究了不同煤种在整个氧化阶段的气体产物生成规律及其特征。在煤的低温氧化阶段,找出了CO等可作为判别煤自燃的指标性气体及C2H4等辅助指标性气体;并得出了各煤种氧化阶段的耗氧规律。     

AlN覆铜板盐雾环境下的退化行为研究

目的 研究AlN覆铜板在盐雾环境下的性能退化及其微观机制。方法 采用交替喷雾和干燥方法对AlN覆铜板进行15周期的中性盐雾试验,并在第1、3、6、10、15周期时检测其相关性能。主要通过击穿电压测试、介电性能测试和导热性能测试等方法,分别评价AlN覆铜板的电绝缘特性、介电损耗及导热系数,并通过扫描电镜和能谱测试对试样表面/截面微观形貌和元素变化进行分析。结果 AlN覆铜板导热系数和击穿电压随盐雾试验周期的增长而逐渐退化,最大退化率分别为13.2%和73.8%。介电损耗明显增加,盐雾试验15周期后,在低频区域的最大值约为1.3。Cu电极发生明显腐蚀,生成大量绿色腐蚀产物,导致表面Ni-P镀层脱落失效。H₂O分子扩散进入AlN陶瓷内部,在局部区域造成陶瓷水解,逐渐形成微裂纹。结论 盐雾试验过程中,Ni-P镀层逐渐开裂剥落,Cu电极表面最终形成大面积疏松多孔的腐蚀产物层。H₂O、Cl^–、Na⁺等逐渐溶解扩散进入AlN陶瓷,导致陶瓷中空位、裂纹、杂质缺陷浓度增加,二者都会增强导热过程中的声子-缺陷散...     

Zinc recovery from hazardous construction wastes via an integrated process of the air classification,alkaline leaching,and water washing

Zinc- and lead-containing wastes are often mixed with construction and demolition wastes in many factories, generating abundant of heavy metal-enriched hazardous waste. In the present study, a novel integrated process of air classification, alkaline leaching, and water washing dechlorination was proposed for the efficient recycling of Zinc (Zn) resources. The first air classification process was realized via venturi tube, wherein the content of Zn could increase by 20 wt.%. After that, the product underwent an alkaline leaching process. Results showed that Zn recovery rate increased with fine particle sizes, and a 65% recovery rate was obtained under the following conditions of 5 mol/L NaOH, liquid/solid 10:1, and leaching time 1 h. Finally, water washing associated with microwave and ultrasonic treatments could remove over 85% of Cl and other water-soluble salts. All the results indicated that the integrated method had an excellent recovery rate for Zn resources from construction and demolition wastes.     

热-碱处理污泥与木耳菌糠共发酵产酸性能的研究

为克服单一剩余活性污泥(WAS)发酵产酸效率低的问题和资源化利用废弃木耳菌糠(SMS),本文对热-碱预处理污泥(PWS)和菌糠进行共发酵,研究预处理和菌糠添加对共发酵体系的产酸性能影响.试验基于原料的总固体含量(TS)共设置6个处理,分别为污泥(WAS∶SMS=1∶0)、预处理污泥(PWS∶SMS=1∶0)、菌糠(PW...     

不锈钢板式热沉传热特性的实验与模拟研究

目的 研究流量、胀高及焊点排布方式对不锈钢板式热沉传热特性的影响。方法 搭建实验平台,加工出结构参数不同的板式热沉实验件,同时采用静力隐式算法建立相应的几何模型,通过实验与数值模拟相结合的方法,研究流量、胀高和焊点排布方式的变化对板式热沉热阻的影响规律,并分析热沉流道内部流场状态。结果 首先计算了6个工况下的热阻,发现实际换热量为540 W时,数值模拟与实验结果的最大相对误差不大于25%。然后分析了误差来源,最后得到了热沉全流道速度场与温度场的分布情况。结论 实验与模拟结果有较好的符合程度,证明了数值模拟方法的可靠性。在换热量相同时,板式热沉的热阻随流量与胀高的增大而减小,焊点为菱形排布的热沉传热性能相对更好。板式热沉内部的流场具有周期性,焊点使流体扰动增强,并形成射流和旋涡,起到了强化传热的效果。