城市生活垃圾渗透系数测试研究

采用常水头测渗实验,对不同压实密度和水力梯度下的新鲜垃圾与陈垃圾的渗透系数进行测试,根据达西定律求得渗透系数值。由于垃圾的不均匀性、小颗粒的运动和大孔隙沟道流的形成和改变,实验初始阶段渗透系数值先增大至峰值,然后缓慢降低直至趋于稳定。实验稳定后,新鲜垃圾压实密度为0.75~0.95 t/m3时,渗透系数值约为1.26E-03~1.43E-03 cm/s。陈垃圾在压实密度分别为1.2和1.4 t/m3时,渗透系数为8.29E-04和1.35E-04 cm/s。     

Leaching assessment of concrete made of recycled coarse aggregate: Physical and environmental characterisation of aggregates and hardened concrete

Each year, millions of tonnes of waste are generated worldwide, partially through the construction and demolition of buildings. Recycling the resulting waste could reduce the amount of materials that need to be manufactured. Accordingly, the present work has analysed the potential reuse of construction waste in concrete manufacturing by replacing the natural aggregate with recycled concrete coarse aggregate.However, incorporating alternative materials in concrete manufacturing may increase the pollutant potential of the product, presenting an environmental risk via ground water contamination.The present work has tested two types of concrete batches that were manufactured with different replacement percentages. The experimental procedure analyses not only the effect of the portion of recycled aggregate on the physical properties of concrete but also on the leaching behaviour as indicative of the contamination degree. Thus, parameters such as slump, density, porosity and absorption of hardened concrete, were studied. Leaching behaviour was evaluated based on the availability test performed to three aggregates (raw materials of the concrete batches) and on the diffusion test performed to all concrete.From an environmental point of view, the question of whether the cumulative amount of heavy metals that are released by diffusion reaches the availability threshold was answered. The analysis of concentration levels allowed the establishment of different groups of metals according to the observed behaviour, the analysis of the role of pH and the identification of the main release mechanisms. Finally, through a statistical analysis, physical parameters and diffusion data were interrelated. It allowed estimating the relevance of porosity, density and absorption of hardened concrete on diffusion release of the metals in study.     

Effectiveness of amphibians as biodiversity surrogates in pond conservation

Amphibian decline has led to worldwide conservation efforts, including the identification and designation of sites for their protection. These sites could also play an important role in the conservation of other freshwater taxa. In 89 ponds in Switzerland, we assessed the effectiveness of amphibians as a surrogate for 4 taxonomic groups that occur in the same freshwater ecosystems as amphibians: dragonflies, aquatic beetles, aquatic gastropods, and aquatic plants. The ponds were all of high value for amphibian conservation. Cross‐taxon correlations were tested for species richness and conservation value, and Mantel tests were used to investigate community congruence. Species richness, conservation value, and community composition of amphibians were weakly congruent with these measures for the other taxonomic groups. Paired comparisons for the 5 groups considered showed that for each metric, amphibians had the lowest degree of congruence. Our results imply that site designation for amphibian conservation will not necessarily provide protection for freshwater biodiversity as a whole. To provide adequate protection for freshwater species, we recommend other taxonomic groups be considered in addition to amphibians in the prioritization and site designation process.     

汉江中下游干流水质变化趋势及持续性分析

汉江是长江中游最大的支流,近年来水质污染日趋严重,且范围有逐渐扩大趋势。随着流域内经济社会发展用水量增长以及2014年南水北调中线一期工程建成引水,汉江中下游流域水资源、水生态环境压力日益显现,流域管理面临较大挑战。利用汉江中下游干流襄阳、仙桃和汉口3个主要的水质监测控制断面1998~2011年实测水质资料中5个水质项目,采用季节性肯达尔检验法对其项目进行了变化趋势检验与分析,并用叠加型指数法验证趋势分析的合理性;结合Hurst指数分析了趋势变化的持续性,结果表明季节性肯达尔检验法方法合理,持续性分析结果可预测未来水质变化,并为水环境保护和管理提供技术参考。     

近50 a长江流域暴雨日数时空变化分析

利用1961~2010年长江流域逐日降水资料和DEM数据,结合Mann-Kendall趋势法、变差系数法以及GIS空间分析等方法,分析了近50 a长江流域年均暴雨日数时空变化特征。结果表明:长江流域年均暴雨日数基本呈自东向西递减的规律,且随着海拔升高,年均暴雨日数逐渐减少,两者呈显著负相关关系;长江流域上游高原气候影响区年均暴雨日数小于1 d;而中上游中亚热带湿润气候影响区大于2 d;随着纬度的增加,暴雨开始时间推迟,结束时间提前,持续时间减少;年暴雨日数的变差系数与年均暴雨日数满足幂指数关系,相关系数达0.97,为显著相关。表现为年均暴雨日数大(小)的地方,变差系数小(大);除长江中下游中部和四川盆地及其周边地区年暴雨日数为减少趋势外,其它地方均表现为不同程度的增加趋势。鄱阳湖水系、四川(雅安市、峨眉山市、万源市)、湖南(安化县、南岳区)、湖北(洪湖市、英山县)年暴雨日数多且变差系数小,洪水、泥石流等灾害压力巨大;为有关部门了解长江流域洪水等灾害的发生机制、提高灾害预测预报能力、制定防灾减灾政策等提供科学依据。     

Effect of stress corrosion cracking at various strain rates on the electrochemical corrosion behavior of Mg-Zn-In-Sn alloy

This study is aimed to determine the effect of stress corrosion with low strain rates on the electrochemical properties of alloy electrode. Stress corrosion cracking tests of Mg-Zn-In-Sn alloy in 3.5 wt.% sodium chloride solutions at 25℃ were performed. The effects of the electrochemical properties under the stress corrosion with low strain rates were investigated. The microstructures of cross section were observed by optical microscope. The results showed that the ultimate tensile strengths of Mg-Zn-In-Sn alloy increased and the strain decreased as the strain rates increased. Open circuit potentials (OCP) of Mg-Zn-In-Sn alloy electrode possess stability and the loop currents (LC) were improved with the increasing of stress in the elastic zone. The variation of OCP and LC did not change with the increasing of strain-rate. The microstructure of cross section observing revealed the mechanism of OCP and LC changing.     

步兵轻武器新型夜瞄复合荧光材料耐腐蚀性能研究

采用自制的复合荧光粉体和化学载体成分,研制出一种步兵轻武器新型夜瞄复合荧光材料。采用酸溶液、碱溶液和盐溶液浸泡腐蚀的方法,研究了针对有关武器表面处理的酸性和碱性环境以及海水浸泡环境下材料的耐腐蚀性能。试验结果表明,研制的新材料具有良好的耐酸、耐碱、耐盐腐蚀性能,可满足步兵轻武器夜间瞄准需求。     

三种铜缓蚀剂抗H2S腐蚀性能研究

研究了BTA,MBI,MBT等3种铜缓蚀剂在H2S环境中的缓蚀性能,采用量子化学研究方法对实验结果进行了分析,研究了苯三唑在铜表面所形成的配合物保护膜的稳定性。结果表明,MBT抗H2S腐蚀性能较差,BTA是铜及其合金在H2S环境中理想的接触缓蚀剂和气相缓蚀剂。     

低合金钢焊接接头腐蚀性能研究进展

详细介绍了低合金铜焊接接头的主要腐蚀破坏形式,包括应力腐蚀、氢致开裂、腐蚀疲劳和电偶腐蚀等,并探讨了焊后热处理和焊接热输入2项工艺参数对焊接接头耐蚀性的影响,提出了提高其耐蚀性能的措施。同时还对焊接接头腐蚀行为的研究方法作了简要概述,并提出了今后的发展方向。     

腐蚀损伤对典型铝合金结构疲劳寿命的影响研究

目的研究严酷服役条件下飞机结构的寿命衰减问题。方法以飞机关键结构模拟件为研究对象,基于编制的某机场环境加速试验谱进行当量加速腐蚀试验,采用MTS810材料试验系统进行预腐蚀后的疲劳试验。结果通过对试验结果的分析,确定了关键结构疲劳寿命腐蚀影响系数与腐蚀损伤尺寸之间的对应关系。结论关键结构腐蚀损伤宽度与疲劳寿命腐蚀影响系数相关性最好。