Development of a fuel cell propulsion system for the existing Mercedes B-Class 160 of petrol driven car

This paper presents a theoretical comparison between fuel cell (FC) power train and conventional petrol driven propulsion system. FC has potential to reduce the CO₂-emissions from road. However, FC power trains require energy storing device, to meet the peak power during extreme drive situations and also able to recover the kinetic energy of the vehicle during break operation. The proposed system includes a polymer electrolyte membrane fuel cell (PEMFC) based drive train and a super capacitor connected in parallel. The system is designed and dimensioned for a conventional petrol driven propulsion system of the Mercedes B-Class160. The feasibility study also includes comparison between the existing conventional systems. It is shown that although FC power train is heavier compared to existing system, urban performance is better and produces no CO₂ and other harmful emissions.     

不同工况下轻型车油耗试验驾驶方式评价

在一台性能稳定的汽油车上由同一驾驶人员按平顺、粗暴和正常3种驾驶方式分别进行NEDC （新欧洲行驶工况）、FTP75（美国认证工况）以及WLTC （世界统一轻型车测试循环）工况油耗试验,采用能量变化率（ER）、距离变化率（DR）、能量经济性变化率（EER）、绝对速度改变率（ASCR）、速度平方根误差（RMSSE）以及惯性做功改变率（IWR）6个指标作为驾驶质量评价指标,通过分析计算每次试验各项评价指标及其与燃料消耗量变化的相关性,确定了油耗试验驾驶方式的合理性边界条件.结果表明,对于WLTC和FTP75工况,平顺驾驶和粗暴驾驶均会导致评价指标变大或者变小,驾驶方式与评价指标呈规律性变化;对于NEDC工况,不同的驾驶方式对NEDC工况油耗影响较小.油耗试验的边界条件,WLTC工况的EER为（0.25±0.47）%、ASCR为（1.20±0.97）%、RMSSE为（0.85+0.15）km/h、IWR为（2.15±1.27）%时,可认为油耗试验的驾驶方式较为合理;FTP75工况的EER为（-0.09±0.69）%、ASCR为（-0.59±0.42）%、RMSSE为（0.88+0.34）km/h以及IWR为（-0.69±1.66）%时,油耗试验的驾驶方式较为合理.     

Emission of intermediate volatility organic compounds from a ship main engine burning heavy fuel oil

Intermediate volatility organic compounds (IVOCs) are crucial precursors of secondary organic aerosol (SOA). In this study, gaseous IVOCs emitted from a ship main engine burning heavy fuel oil (HFO) were investigated on a test bench, which could simulate the real-world operations and emissions of ocean-going ships. The chemical compositions, emission factors (EFs) and volatility distributions of IVOC emissions were investigated. The results showed that the main engine burning HFO emitted a large amount of IVOCs, with average IVOC EFs of 20.2–201?mg/kg-fuel. The IVOCs were mainly comprised of unspeciated compounds. The chemical compositions of exhaust IVOCs were different from that of HFO fuel, especially for polycyclic aromatic compounds and alkylcyclohexanes. The volatility distributions of IVOCs were also different between HFO exhausts and HFO fuel. The distinctions in IVOC emission characteristics between HFO exhausts and HFO fuel should be considered when assessing the IVOC emission and related SOA formation potentials from ocean-going ships burning HFO, especially when using fuel-surrogate models.     

双冲击泡沫水浴除尘器在钢铁联合企业双燃料锅炉上的应用

结合工程实例介绍了双冲击泡沫水浴除尘器的应用领域、结构特点、处理效果及其现实意义和发展前景。     

单室MFC型生物毒性传感器对重金属离子的检测研究

构建了单室微生物燃料电池(air-cathode microbial fuel cell,ACMFC)型生物毒性传感器,以含重金属离子(Cd2+、Cu2+)人工配水为检测对象,分析了有毒物质对检测仪的抑制率与有毒物质浓度的线性关系.结果表明,①单室MFC型生物毒性传感器结构简单,操作方便,灵敏度较高,可用于水体重金属离子(Cd2+、Cu2+)生物毒性的快速检测;②在实验条件下,该生物毒性传感器检测时间4h,清洗时间2～10min,恢复时间4h;③检测结果显示,实验室自配Cd2+、Cu2+及其混合液IC20值分别为0.6、0.8和0.25mg/L,有毒物质浓度与MFC产电量的抑制率呈显著正相关,相关系数分别为0.9960、0.9744和0.9907.     

车用燃料环保管理——《2013年中国机动车污染防治年报》（第V部分）

环境保护部日前发布《2013年中国机动车污染防治年报》,公布了2012年全国机动车污染排放状况。本期“研究成果展示”专栏以六篇形式连载。本文刊载关于车用燃料环保管理的内容,以飨读者。该年报指出。2012年,全国实施车用汽油国Ⅲ阶段标准,硫含量不超过150ppm。按照国家强制性标准《车用汽油》（GB17930—2011）要求,自2014年1月1日起,全国实施车用汽油国IV阶段标准,硫含量不超过50ppm。2012年,我国车用柴油生产和销售执行《车用柴油》（GB19147—2009）标准和《普通柴油》（GB252—2011）标准。按照规定,车用柴油硫含量不得超过350ppm,2013年7月1日后普通柴油硫含量将不得超过350ppm。在已发布第四阶段车用汽油标准（硫含量不大于50ppm）的基础上,由国家质检总局、国家标准委尽快发布第四阶段车用柴油标准（硫含量不大于50ppm）,过渡期至2014年底;2013年6月底前发布第五阶段车用柴油标准（硫含量不大于10ppm）,2013年底前发布第五阶段车用汽油标准（硫含量不大于10ppm）,过渡期均至2017年底。加快国内炼油企业升级改造,确保按照汽、柴油标准升级实施时间如期供应合格油品。2012年环境保护部发布的《关于加强储油库、加油站和油罐车油气污染治理工作的通知》指出,按照国务院批复的《重点区域大气污染防治“十二五”规划》要求,列入大气污染防治“重点控制区”的地区,应限时完成加油站、储油库、油罐车的油气回收治理;大气污染严重的地区可根据本地实际,提前完成油气污染治理工作。     

地下油料储存库火灾初期模式与安全性研究

使用模拟的地下油料储存库装置,对地下油料储存库火灾初期模式进行了实验研究.结合油料地下储存库火灾防治和安全性要求对实验结果进行了分析.结果表明,模拟油料地下储存库起火后,火灾初期模式与实验初始条件、边界条件和装置结构直接相关.在一定条件下,模拟油料地下储存库内出现爆燃向爆轰的转变;不同的环境条件下,火灾的模式不同;油料地下储存库内火灾的发展,油料的持续燃烧及发生燃烧的部位受通气条件和洞内复杂的烟气流向等条件控制.     

典型木材燃料层流扩散火焰碳黑生成特性研究

为了对木材燃料层流扩散火焰碳黑生成特性进行研究,搭建了基于消光法原理的轴对称层流火焰碳黑浓度测量平台,选用马尾松针、柚木以及红橡木三种典型木材燃料粉碎成针状试样,并堆成直径3.5 cm堆垛,利用酒精引燃后可获得稳定的层流扩散火焰,同时通过电热丝辅助加热延长稳定燃烧。通过对三种典型木材燃料层流燃烧过程的质量损失和火焰碳黑浓度的测量和对比分析,结果显示三种燃料中马尾松针碳黑生成能力最大,这说明木材的碳黑生成能力可能与其碳元素和氧元素的含量有关。     

Development of a hybrid microbial fuel cell (MFC) and fuel cell (FC) system for improved cathodic efficiency and sustainability: the M2FC reactor

In an effort to improve the efficiency and sustainability of microbial fuel cell (MFC) technology, a novel MFC reactor, the M2FC, was constructed by combining a ferric-based MFC with a ferrous-based fuel cell (FC). In this M2FC reactor, ferric ion, the catholyte in the MFC component, is regenerated by the FC system with the generation of additional electricity. When the MFC component was operated separately, the electricity generation was maintained for only 98 h due to the depletion of ferric ion in the catholyte. In combination with the fuel cell, however, the production of power was sustained because ferric ion was continually replenished from ferrous ion in the FC component. Moreover, the regeneration process of ferric ion by the FC produced additional energy. The M2FC reactor yielded a power density of up to 2 W m⁻² (or time-averaged value of approximately 650 mW m⁻²), density up to 20 times (or approximately six times based on time-averaged value) higher than the corresponding MFC system.