废弃产品回收处理企业环境绩效评价初探

近年来,废弃产品回收处理行业日益受到政府和社会各界的关注,而回收处理企业是实施回收处理活动的主体,相关法律、法规的出台对回收处理企业提出了更高的要求。本文在概括梳理相关法律、法规的基础上,初步建立了废弃产品回收处理企业环境绩效评价指标体系,为回收处理企业采用先进的技术工艺、降低环境负荷、加强职业健康监护和企业环境管理提供参考,以适应国家政策要求和行业发展的需要。     

Recycling of EDTA solution after soil washing of Pb, Zn, Cd and As contaminated soil

Soil washing with EDTA is known to be an effective means of removing toxic metals from contaminated soil. A practical way of recycling of used soil washing solution remains, however, an unsolved technical problem. We demonstrate here, in a laboratory scale experiment, the feasibility of using acid precipitation to recover up to 50% of EDTA from used soil washing solution obtained after extraction of Pb (5330 mg kg⁻¹), Zn (3400 mg kg⁻¹), Cd (35 mg kg⁻¹) and As (279 mg kg⁻¹) contaminated soil. Up to 100% of EDTA residual in the washing solution and 100%, 97%, 98% and 100% of initial Pb, Zn, Cd and As concentration in the solution, respectively, were removed in an electrolytic cell using a graphite anode. We employed the recovered EDTA and treated washing solution to prepare recycled soil washing solution with the same potential for extracting toxic metals from soil as the original. The efficiency of soil washing depends on the EDTA concentration. Using twice recycled 30 mmol EDTA kg⁻¹ soil, we removed 44%, 20%, 53% and 61% of Pb, Zn, Cd and As, respectively, from contaminated soil.     

Laboratory studies on formation and minimisation of polychlorinated dibenzodioxins and -furans (PCDD/F) in secondary aluminium process

The objectives of this work were to study the formation mechanisms of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/F) in thermal aluminium recycling processes by use of laboratory experiments. The pattern of isomers of PCDD/F indicates that de novo synthesis is important in aluminium smeltery. The mechanisms of PCDD/F formation in aluminium smelting are similar to that of various incineration processes of waste material. The results of bioanalysis (EROD-test) confirms the existence of de novo synthesis of PCDD/F, but points out to the existence to some additional, toxic compounds of unknown structure. To reduce the amount of PCDD/F the input of carbon at the metal should be reduced; in addition the metal smeltery plants should be cleaned from fly ash particles. It is suggested to use good primary methods in the technical plants like constant feeding of the metal into the oven will minimise PCDD/F concentration. The biological EROD-bioassay is a good tool to estimate PCDD/F-TEQ values also for this technical process simulated in the laboratory.     

水质丁基黄原酸测定难点探讨

丁基黄原酸是水质监测的重要项目之一。水中丁基黄原酸的测定,在样品采集保存、前处理及仪器分析各阶段都存在一定的技术难点。实际分析时很容易出现测定结果不理想,甚至定性定量错误等问题。结合实验对丁基黄原酸测定中容易出现的问题及注意事项进行探讨,正确区分丁基黄原酸及其盐,有效保存样品,采用低损失的前处理方法以及选择性好的分析仪器,有利于提高丁基黄原酸测定的准确性。众多丁基黄原酸测定方法中,液相色谱质谱法、离子色谱法以及液相色谱法在选择性和灵敏度方面更具优势,也可用于其他方法检出丁基黄原酸时对测定进行确认。     

Reduction of hexavalent chromium with scrap iron in a fixed bed reactor

The reduction of hexavalent chromium by scrap iron was investigated in continuous long-term fixed bed system. The effects of pH, empty bed contact time (EBCT), and initial Cr(VI) concentration on Cr(VI) reduction were studied. The results showed that the pH, EBCT, and initial Cr(VI) concentration significantly affected the reduction capacity of scrap iron. The reduction capacity of scrap iron were 4.56, 1.51, and 0.57 mg Cr(VI)·g^-1 Fe⁰ at pH 3, 5, and 7 (initial Cr(VI) concentration 4 mg·L^-1, EBCT 2 min, and temperature 25°C), 0.51, 1.51, and 2.85 mg Cr(VI)·g^-1 Fe⁰ at EBCTs of 0.5, 2.0, and 6.0 min (initial Cr(VI) concentration 4 mg·L^-1, pH 5, and temperature 25°C), and 2.99, 1.51, and 1.01 mg Cr(VI)·g^-1 Fe⁰ at influent concentrations of 1, 4, and 8 mg·L^-1 (EBCT 2 min, pH 5, and temperature 25°C), respectively. Fe(total) concentration in the column effluent continuously decreased in time, due to a decrease in time of the iron corrosion rate. The fixed bed reactor can be readily used for the treatment of drinking water containing low amounts of Cr(VI) ions, although the hardness and humic acid in water may shorten the lifetime of the reactor, the reduction capacity of scrap iron still achieved 1.98 mg Cr⁶⁺·g^-1 Fe. Scanning electron microscope equipped with energy dispersion spectrometer and X-ray diffraction were conducted to examine the surface species of the scrap iron before and after its use. In addition to iron oxides and hydroxide species, iron-chromium complex was also observed on the reacted scrap iron.     

砷与无定形氧化铝的表面络合反应平衡常数计算

根据不同离子浓度、不同pH值的溶液中As在无定形氧化铝表面的吸附量,利用三种不同的表面络合模型计算As与无定形氧化铝表面络合反应的平衡常数,将计算得到的平衡常数模拟 As(Ⅲ)无定形在氧化铝表面各个络合物种的吸附百分比与 As(Ⅲ)的 X光吸收光谱边缘结构分析结果进行定性比较,表明计算结果与分析结果较为吻合.从而验证了此次计算得到的平衡常数是准确的.     

包装企业有机废气深度处理技改实例探讨

有机废气的治理方法有很多,应选择合适的治理方法或组合来提高处理效率,来着力改善大气环境质量。以某包装企业有机废气深度处理技术改造项目为实例,探讨采取RTO焚烧法取得的治理效果。     

废荧光灯的环境污染对策探讨

废荧光灯管中的有害物质如果处置不当,会对人体健康和环境造成危害。目前国内大部分废荧光灯管未得到无害化处置,主要在指定的法规、有效的政策以及完善的运营机制方面存在很多弊端,应引起社会各界的关注和政府部门的重视。本文结合国内外废荧光灯管回收处置现状,针对存在的问题,提出源头控制、分类收集、多渠道回收、建立资金及资金补贴机制以及技术手段措施,为从根本上解决废旧灯管回收难的问题,并探索社会源危险废物的管理提供对策建议。     

采油作业“三废”控制技术研究与应用

针对采油作业产生的废酸、固废、废水处理成本高、技术不成熟等问题,研发改性废酸降压增注、深部调剖技术;高比重污泥悬浮研磨后的固废处理技术;低耗水打塞、原井液+CaCl2压井、原井液处理再利用技术,减少了"三废"的产生,解决了"三废"环保处理费高等问题,消除了环保隐患,实现了清洁生产,环境效益显著。     

废弃轮胎制备中孔炭吸附材料工艺及性能研究

为了解决废弃轮胎造成的资源浪费和环境污染的问题,对以废弃轮胎橡胶为碳的前驱体原料,制备具有高吸附性能中孔炭材料工艺进行了系统的研究。通过XRD、扫描电镜以及比表面积分析,对制备的中孔炭微观结构和性能进行表征,讨论了炭化温度、碱炭比,以及活化温度和活化时间等工艺条件对制备中孔炭的产率、结构和性能的影响。结果表明,通过改变工艺条件制备的中孔炭的孔径分布可以在2~80 nm范围内进行调控。在500℃炭化温度,碱炭比为4∶1,900℃活化1 h的工艺条件下,制备的中孔炭的比表面积为473 m2/g,对甲基橙的最大吸附量达到254 mg/g。