塑烧管除尘器在冶金精轧线的应用

冶金精轧线烟气烟尘含油含水，采用传统的布袋除尘等方式难以治理。塑烧管具有刚性结构、高过滤效率、压降稳定、疏水疏油性、防静电等特性，适合于治理含油含水的烟气。塑烧管除尘器在冶金精轧线的应用取得了良好的效果。     

连续退火机组氮气窒息事故分析及预防对策

介绍了某冷轧厂连续退火机组发生的一起氮气窒息事故,分析了水淬槽氮气产生的机理、事故发生的原因,提出了预防氮气窒息事故的对策措施.     

CONTROL OF LAKE PHOSPHORUS WITH ALUMINUM SULFATE: DOSE DETERMINATION AND APPLICATION TECHNIQUES1

ABSTRACT: Nutrient diversion does not always bring about prompt and sufficient reduction in lake phosphorus concentration due to recycling from nutrient rich sediments. Certain lakes and reservoirs may continue to experience nuisance algal blooms and require additional restorative steps. The phosphorus precipitation/inactivation technique is a procedure to remove phosphorus from the water column and to control its release from sediments in order to achieve P-limiting conditions to algal growth. Aluminum salts have been used in advanced waste water treatment to remove phosphorus and this technology was extended to lake rehabilitation. Guidelines for dose calculation and application are generally lacking, and are provided in this report. The dose determination suggested here allows maximum application of aluminum to bottom sediments and thus emphasizes long term control of phosphorus recycling. Dose can be calculated directly from the alkalinity of the water to be treated. Titration of lake water samples of Varying alkalinity allows the establishment of the relationship between residual dissolved aluminum, alkalinity, and dose which can then be employed for lake scale applications of alum to lakes and reservoirs. Application equipment and procedures are described. These depend on site characteristics and treatment objectives and include lakeside stores, a distribution pipe, and an application barge and manifold. Alum may also be used to meet other restoration objectives including the treatment of problem flows and the reduction of particulate concentrations.     

铝及铝合金在自然水环境中的腐蚀行为对比研究

目的 分析研究铝及铝合金在自然水环境中的腐蚀行为。方法 通过开展LM3纯铝、5083铝、LF6M去包铝及带包铝在淡海水交替、海水及淡水自然环境下2 a的暴露试验,将3种环境下材料的腐蚀形貌、腐蚀速率进行对比。总结4种铝及铝合金材料在不同水环境下的腐蚀规律,对其腐蚀机理进行简要的探讨,并对其长周期的腐蚀行为进行预测。结果 通过对4种材料局部腐蚀协同影响因子(b)的对比可以发现,淡水环境对LM3纯铝局部腐蚀的影响最大,淡海水环境对5083铝合金局部腐蚀影响最大,淡水及淡海水环境对2种LF6M铝合金材料局部腐蚀的影响都很大。结论 5083、LF6M带包铝及去包铝,在淡海水交替自然环境下的耐蚀性能最差,LM3纯铝在淡水环境下耐蚀性能最差。     

基于CYCBD和麻雀搜索算法的滚动轴承故障特征提取方法

目的解决在较强的噪声环境下最大二阶循环平稳盲解卷积(MaximumSecond OrderCyclostationary Blind Deconvolution,CYCBD)算法在滚动轴承故障特征提取时效果欠佳的问题,为滚转尾翼导弹的尾翼滚动轴承故障诊断提供方法参考。方法提出一种利用麻雀搜索算法(SparrowSearchAlgorithm,SSA)优化CYCBD算法的方法,将CYCBD算法解卷积的包络谱熵作为SSA寻优的适应度函数,利用SSA高效地寻找出合适的循环频率以及滤波器长度,选择自适应参数后,再使用CYCBD算法有效解卷得到周期脉冲特征。结果同时对比SSA优化CYCBD前后进行故障特征提取的包络谱图,CYCBD的噪声幅值不超过0.13 m/s^(2),峰值不超过0.29 m/s^(2),用SSA优化CYCBD的噪声幅值不超过0.08 m/s^(2),峰值不超过0.32 m/s^(2),故障频率成分更加突显,无论是噪声幅度,还是峰值幅度特性,均较CYCBD有了较大改善。结论仿真实验验证了SSA优化CYCBD方法能够更加清晰地辨识到故障特征频率及其倍频成分,其具有良好的工程应用前景。     

聚合氯化铝与三氯化铁混凝剂在常规水处理中的运用

通过聚合氯化铅与三氯化铁在常规水处理的生产性实验，从经济成本、水质指标和实际使用存在的问题对其进行分析比较，并比较了两种混凝剂在常规水处理中的优缺点。     

改性人造沸石处理含黄玉铬洁(Ⅵ张焕)祯地下水的实验研究

为了提高人造沸石对地下水中铬(Ⅵ)的去除能力,采用氯化铝对人造沸石进行改性。确定最佳改性条件:20%氯化铝溶液,液固比12 mL/g,室温下以180 r/min振荡改性8 h;最佳除Cr(Ⅵ)条件:pH值为4～8,液固比为33.3 mL/g,室温下水浴恒温振荡2 h。改性沸石对铬(Ⅵ)的吸附符合Langmuir及Freundlich等温线方程,由Langmuir吸附等温线可得其吸附容量为5.624 mg/g。在最佳反应条件下,水样中铬(Ⅵ)浓度可由5 mg/L下降到0.026 mg/L,低于0.05 mg/L,满足GB/T 14848—93《地下水环境质量标准》Ⅲ类标准。     

浅论通风隔声窗的发展

分析当前通风隔声窗的现状,以及通风隔声窗发展中的几个关键点,即:安静、节能、智能、清新空气、美观;结合正升声学公司开发的通风隔声窗产品讨论通风隔声窗在未来住宅建筑中的应用。     

Oxidative removal of acetaminophen using zero valent aluminum-acid system: Efficacy, influencing factors, and reaction mechanism

Commercial available zero valent aluminum under air-equilibrated acidic conditions (ZVAl/H⁺/air system) demonstrated an excellent capacity to remove aqueous organic compounds. Acetaminophen (ACTM), the active ingredient of the over-the-counter drug Tylenol^®, is widely present in the aquatic environment and therefore the treatment of ACTM-contaminated water calls for further research. Herein we investigated the oxidative removal of ACTM by ZVAl/H⁺/air system and the reaction mechanism. In acidic solutions (pH < 3.5), ZVAl displayed an excellent capacity to remove ACTM. More than 99% of ACTM was eliminated within 16 hr in pH 1.5 reaction solutions initially containing 2.0 g/L aluminum and 2.0 mg/L ACTM at 25 ± 1\textcelsius. Higher temperature and lower pH facilitated ACTM removal. The addition of different iron species Fe⁰, Fe²⁺ and Fe³⁺ into ZVAl/H⁺/air system dramatically accelerated the reaction likely due to the enhancing transformation of H₂O₂ to HO. via Fenton's reaction. Furthermore, the primary intermediate hydroquinone and the anions formate, acetate and nitrate, were identified and a possible reaction scheme was proposed. This work suggested that ZVAl/H⁺/air system may be potentially employed to treat ACTM-contaminated water.     

原水性质对新型含Ca2+复合混凝剂混凝过程的影响

为了提高水处理效率,保证出水水质,需要开发新型高效混凝剂.本实验采用经过Ca2+改性的混凝剂针对不同水样进行混凝实验,考察了浊度、有机物去除、余铝和形成絮体性质.结果表明在纯颗粒物体系中,PACl(聚合氯化铝)和Al Cl3中加入的Ca2+对于浊度去除率无明显影响,在低投加量下能够有效降低沉后水中余铝浓度,Al Cl3做混凝剂,投加量0.10mmol·L~(-1)时,沉后水余铝浓度从0.15 mg·L~(-1)降低到0.10 mg·L~(-1).在腐殖酸体系中,混凝剂中的钙离子可明显降低腐殖酸分子的负电荷,降低沉后水余铝浓度以及增大絮体粒径.对于腐殖酸与蛋白质体系,当投加量为0.16 mmol·L~(-1)时,使用含有Ca2+的PACl做混凝剂时,钙离子的存在使得平衡时絮体粒径增加了大约50μm,可明显改善絮体的沉降性.碱性条件(pH=8.5)下改性混凝剂沉后水中DOC浓度降低0.2~0.6 mg·L~(-1),余铝降低0.4~0.7 mg·L~(-1).酸性条件(pH=5.5)下改性混凝剂沉后水DOC、余铝浓度无明显变化.